I see that low voltage memory is not as popular as regular. At least on some online stores, based on the number of reviews.
I refer to low voltage as 1.35V and regular as 1.5V or 1.65V
Is there any reason why would one go with higher voltage? My choice would be 1.35V, but wonder about any back draws.
Thanks
Low voltage ECO memory vs. regular
Moderators: Ralf Hutter, Lawrence Lee
-
- Posts: 24
- Joined: Sat Jun 07, 2003 9:30 am
- Location: New York City
I bought 8GB of the G.Skill ECO 1.35v ram for a recent computer build. The memory defaults to running at 1.5v. The 1.35v setting is contained in the XMP extended memory profile, which both lowers the voltage and raises the memory speed. I did not see any noticeable change in system power consumption from the Kill-A-Watt power meter. Power fluctuates even at "idle" depending on what the system is doing, so I wouldn't have been able to see a few watts either way. To use the XMP memory profile your motherboard needs to include XMP support in the bios, and in my case it had to specifically be enabled. Alternatively, I could have manually set the RAM speed and voltage. Maybe keeping the same speed and lowering the voltage would have reduced power consumption.
All other variables being equal, lower voltage WILL net lower power. But, as you said, the difference will be very small.Klusu wrote:Low voltage is not necessarily lower power. Anyway, the difference is small and hard to measure. Many "regular" RAMs would work at lower voltage.
In my case the 1.35V RAM was about the same price as regular 1.5-1.65V DDR3, so why not. I expect I'll have to manually set the 1.35V in BIOS, no big deal. This is somewhat like undervolting or overclocking, no guarantee just that margins exist in all these components and seeking those margins can have rewards.
I somehow doubt that 0.15V will make a noticeable difference in your carbon footprint, even in long term. If you want to spare power, start with the power-hungry devices like CPU, VGA or HDD.
So I'd go with the one that has the better stats/benchmarks/price, and not worry about the voltage.
OK, maybe the lower voltage means better overclocking capabilities (no idea, I'm no overclocker myself), but in that case you're not talking ECO in the first place.
So I'd go with the one that has the better stats/benchmarks/price, and not worry about the voltage.
OK, maybe the lower voltage means better overclocking capabilities (no idea, I'm no overclocker myself), but in that case you're not talking ECO in the first place.