I have the enermax PSU as used in the quietenin thermistor PUS article.
I modded it in a different way though, and wish to know if you guys think it is safe....? Or safish :p
I opened it and have disconnected the 92mm TOTALLY, so no noise there. I took the thermistor off the coil, and have it wedged in open space away from lots of heat. Hopefully quieten it down
ANd then i have turned the RPM right down using knob on back.
Its a LOT quieter, but will it be safe?
It is powering an athlon 1.2, 2 cd drives, 2 hard drives, sb live platinum and a fan.
A factor that should work in my favour is the case. It is in a YY cube - please look http://www.thewarfields.com/YYCubeCase6.htm
there to see what i mean. (its not my site, but i have the same case
) The PSU is in its own compartment and i have nothing above it, and nothing near it producing heat.
20mins at idle its still cool air coming out of it, which is reasurring. I am going to put it under load and see if it stays cool....