PSUs: The source of DC power for all components in the PC & often a big noise source.
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
-
superdrive
- Posts: 19
- Joined: Wed Jan 19, 2005 10:49 am
- Location: sweden ->blekinge -> olofström
Post
by superdrive » Sat Jan 22, 2005 11:53 am
hey.
anybody have an antec phantom psu?
i would really like to know the lengths of the cables.
especially the mobo powercables.
im thinking of getting a phantom psu and having it as an external psu for my antec aria based computer.
-
superdrive
- Posts: 19
- Joined: Wed Jan 19, 2005 10:49 am
- Location: sweden ->blekinge -> olofström
Post
by superdrive » Sat Jan 22, 2005 12:25 pm
but how long is the "main ATX cable w/24-pin connector"?
anybody know?
-
Slaugh
- Posts: 774
- Joined: Thu Dec 02, 2004 2:27 am
- Location: Quebec, Canada
Post
by Slaugh » Sat Jan 22, 2005 7:53 pm
superdrive wrote:but how long is the "main ATX cable w/24-pin connector"?
anybody know?
I have a Phantom myself and measured the cables when I got it... Let me find my notes... OK! The main ATX cable is about 21 inches... (no more than 22 inches if you add the connector)
-
superdrive
- Posts: 19
- Joined: Wed Jan 19, 2005 10:49 am
- Location: sweden ->blekinge -> olofström
Post
by superdrive » Sat Jan 22, 2005 8:00 pm
21" thats about 50-55 cm i guess then. 25 cm inside and 25cm outside the case.
should be long enough to use externally.
and even if its not i can always make the cables longer
too bad theyre not sleeved
-
Slaugh
- Posts: 774
- Joined: Thu Dec 02, 2004 2:27 am
- Location: Quebec, Canada
Post
by Slaugh » Sat Jan 22, 2005 9:16 pm
superdrive wrote:21" thats about 50-55 cm i guess then. 25 cm inside and 25cm outside the case.
should be long enough to use externally.
and even if its not i can always make the cables longer
too bad theyre not sleeved
21" is 53.34cm... Google is so useful...
By the way, my Phantom is also ouside the case. It was easy to do because all the cables had to be connected at the top of the case... (the HDD is inside a heatpipe cooler in a 5.25" bay)
-
stighenning
- Posts: 33
- Joined: Mon Jan 17, 2005 12:31 pm
Post
by stighenning » Sun Jan 23, 2005 6:18 am
Will the new sonata 2 be sold with a fanless PSU ?
Or do you think I can go ahead and buy the fanless PSU today
-
Rusty075
- SPCR Reviewer
- Posts: 4000
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Phoenix, AZ
-
Contact:
Post
by Rusty075 » Sun Jan 23, 2005 6:28 am
No, the Sonata II will not be sold with a fanless PSU.
-
stighenning
- Posts: 33
- Joined: Mon Jan 17, 2005 12:31 pm
Post
by stighenning » Sun Jan 23, 2005 9:10 am
Okey. Then I'll be going to buy the Silverstone ST30NF.
Although you ratet the Phantom 350 higher, I checked with webshops and the only thing available is the Silverstone.
Thank you for testing these PSU! Please keep up the good work.
-
superdrive
- Posts: 19
- Joined: Wed Jan 19, 2005 10:49 am
- Location: sweden ->blekinge -> olofström
Post
by superdrive » Sun Jan 23, 2005 9:20 am
thanks for the help guys...
now i can start browsing webshops for the cheapest place to buy the phantom.
btw, anybody tried acoustipack on the aria? or something like it?
and will the phantom work with future btx mobo's?