(This doesn't directly involve PC PSUs, but this seems the most reasonable place to post it.)
I've been using a borrowed Adcom GFA-555 for a couple weeks & watching it through my Kill-a-Watt. This amp has a pretty sizable power supply, and the KaW has shown some interesting data.
The 555 draws about 45W/70VA idling (a bit more when it's hot). But it sucks a lot more to charge its capacitors when first powered up. I've seen this hit between 275-375W; it's very inconsistent because the KaW samples too slowly. Tonight I looked at power-on VA for the first time. 830! The power factor goes way out of whack with that 1st second's hugely capacitive load.
Practical example of power factor
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
-
- *Lifetime Patron*
- Posts: 1288
- Joined: Sat Oct 25, 2003 3:21 pm
- Location: 15143, USA
- Contact:
Re: Practical example of power factor
I just googled for some pics of the inside of that amp, and not only does it have large capacitors, but it also has a large toroidal transformer, which means the inrush current will be even higher. The power factor can't really be 830 though; it is by definition between 0 and 1.
Re: Practical example of power factor
I read it as 830VA....not a power factor of 830.
-
- *Lifetime Patron*
- Posts: 1288
- Joined: Sat Oct 25, 2003 3:21 pm
- Location: 15143, USA
- Contact:
Re: Practical example of power factor
Yes, it's 830VA at 300ishW, so power factor is well below 0.5.
The 555 has 60KuF at 80V. It's a fair bit of energy!
The 555 has 60KuF at 80V. It's a fair bit of energy!
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Re: Practical example of power factor
Now you know why lights flicker when a big amp is is turned on.
Re: Practical example of power factor
Either that, or someone is getting it in the Big House.