It is currently Sun Mar 01, 2015 3:28 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 440 posts ]  Go to page Previous  1 ... 6, 7, 8, 9, 10, 11, 12 ... 15  Next
Author Message
 Post subject:
PostPosted: Thu May 03, 2007 1:46 am 
Offline

Joined: Thu May 03, 2007 12:46 am
Posts: 2
Location: Bucharest
Image
It's not pretty, but it's silent 8)

_________________
Yeong Yang YY-5603
Seasonic S12-430 rev.A3
AMD Atholon64 3000+Artic Freezer Pro
Asus K8N
YateLoon D12SL-12+QFan(800rpm)
AsusFX5200+Aerocool VM-101
Maxtor HDD SATA+Suspension
Asustek TV tuner
Audiotrak Prodigy LT


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 06, 2007 1:42 pm 
Offline

Joined: Sun May 06, 2007 1:39 pm
Posts: 2
Is it safe to run suspended harddrives?


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 06, 2007 3:35 pm 
Offline

Joined: Wed Feb 07, 2007 1:45 pm
Posts: 32
Location: Romania, Timisoara
Quite safe...as long as you use strong rubber bands. Also you will need just a little air flow around the HDD to prevent overheating.(a 80mm fan @5V will do the trick) Nothing more...

_________________
http://www.silentpcreview.com/forums/vi ... hp?t=39383


Top
 Profile  
 
 Post subject: My first attempt to suspend HDDs
PostPosted: Mon May 07, 2007 3:03 am 
Offline

Joined: Thu Jan 18, 2007 10:31 pm
Posts: 305
Location: Japan
The first three pictures are of a modded Silverstone CFP51. Normally it will hold up to four HDDs stacked, instead I'm using it to hold up to three side by side. It's amazing how much quieter it is now :shock:
Image

Image

Image

The last image shows my HTPC, pretty simple suspension for a single drive, if you look closely, you can see the elastic bands are being held onto the HDD by four cable tie-downs. They have a sticky side that ended up working perfectly in this situation. BTW- the case is a Silverstone LC17. I'm about to swap the three 120mm case fans for three Yate Loons, then it will be my very quiet HTPC.
Image

_________________
The 3-Step Overclocking Guides: Sandy Bridge || Bloomfield & Gulftown || Lynnfield || Clarkdale


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 07, 2007 3:54 am 
Offline

Joined: Sun May 06, 2007 1:39 pm
Posts: 2
Great work miahallen! But please take out all those metal barbs (hope
this is the correct tech name for it) anyway those sharp metal ends leaved
after you make a holl in metal... if you don't do it you end up couting a finger
or something else when changing harddrives or doing any other work in that
space :cry: some days ago i have done a big hole in my finger because of
those metal barbs :cry: now my eyes are hopen. Sorry for the bad english.


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 08, 2007 4:02 pm 
Offline

Joined: Wed Feb 21, 2007 5:34 pm
Posts: 81
Location: Denmark
Here's what i did with an Antec SLK3000.
The drive cage is resting on some rubbery foam and is held in place with the same rubbery foam, or foamy rubber and the drives are mounted in the drive cage in the normal manner with screws and rubber grommets.

Image
Image
Image

Excuse me for the bad picture quality which is a result of a bad cellphone camera, shaky hands and nighttime photography without any good lightsource.

_________________
C2D E8400, Noctua NH-C12P, Asus P5Q-E, 2 x 1GB Kingston HyperX, Radeon 4870, WD6400AAKS & WD15EARS, Corsair HX-620W, Antec P182, Scythe S-Flex, t.c electronics konnekt 8 soundcard.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 25, 2007 11:56 am 
Offline

Joined: Sat Jun 17, 2006 1:51 am
Posts: 7
Location: Italy
2 Western Digital hard disks in my Antec SLK3000B: is it safe?

Image

Image

Image

The difference of noise between using the original cage and suspending the disks is amazing!

_________________
# AMD X2 3800+ Windsor + Noctua NH-U12F + NF-S12-1200 - MSI K9N Platinum - Corsair XMS2 2x1GB PC6400 5-5-5-12 - suspended WD2500JS+WD1200JB - NEC ND3520 - Antec SLK3000B + Tricool 120 + Papst 4412 F/2GLL - Sapphire Radeon X1300 512 MB - Seasonic S12-500
# hdd suspension, Noctua NH-U12F, Scythe Ninja: www.mycomputingart.com


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 20, 2007 11:26 pm 
Offline

Joined: Fri Jul 20, 2007 11:25 pm
Posts: 12
Where did you guys get those plastic/metal clips for that hard drives? Thanks

Edit: BTW, do you guys think the P180 needs suspension?


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 4:29 am 
Offline

Joined: Thu Jul 19, 2007 9:44 pm
Posts: 1
mountain wrote:
Where did you guys get those plastic/metal clips for that hard drives? Thanks


I got mine at home depot.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 8:08 am 
Offline

Joined: Thu Jan 18, 2007 10:31 pm
Posts: 305
Location: Japan
mountain wrote:
Where did you guys get those plastic/metal clips for that hard drives? Thanks

Edit: BTW, do you guys think the P180 needs suspension?

I got mine at a home improvement store called Unidy (I live in Japan). I have a P180b, and I have 4 HDD right now, 3x320GB Wester Digital in the lower chamber. They are mounted with the default method, and I cannot hear them. It was only the 160GB Wester Digital that I added in the 5.25" bays that was really noisy. I used the Silverstone bay adaptor, as you can see in the photos. That's what I modified with the suspension, it is very quiet now. I think I would have been happy with the default HDD racks in the upper location, but I removed my due to the 8800GTX I have installed taking up so much space. But if you don't have a huge graphics card, I would think it would be worth a shot. Good luck.

_________________
The 3-Step Overclocking Guides: Sandy Bridge || Bloomfield & Gulftown || Lynnfield || Clarkdale


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 8:55 am 
Offline

Joined: Fri Jul 20, 2007 11:25 pm
Posts: 12
Thank you for your replies, both of you.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 22, 2007 5:27 pm 
Offline

Joined: Fri Jul 20, 2007 2:49 pm
Posts: 26
Does the type of elastics make a difference when you build a HD suspension?

And with "type" I mean, like flat elastics or rounded elastics

Flat:
Image

Rounded:
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 22, 2007 7:16 pm 
Offline

Joined: Thu Dec 15, 2005 11:06 am
Posts: 2049
Location: Klamath Falls, OR
The.Jackal wrote:
Does the type of elastics make a difference when you build a HD suspension?

Well, the elastic should be elastic! :D

Rubber is best, but it ages, cracks, and breaks - not good.
Stretch Magic is a synthetic compound that doesn't seem to age and is hard to break - you have to work at it.

Just buy stuff that doesn't break, but isn't designed to hold up 200lb either. :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 25, 2007 3:31 am 
Offline

Joined: Tue Jul 24, 2007 6:49 pm
Posts: 8
LOL, thank you everyone, I havent laughed at case mods so much in my life since someone 1st mentioned to me, he put a window in the side of his case, that was seriously a number of years ago.....LMAO

Suspended HD indeed.....oh, nevermind!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 30, 2007 4:25 am 
Offline

Joined: Mon Mar 20, 2006 6:23 am
Posts: 138
Location: Antwerp, Belgium
Here's my contraption. Made it about a year ago I think. A bit of elastic string (used for clothing), 6 metal pieces to hang it up, some screws, the bottom of a broken floppy drive for support and some zip ties as a fail safe mechanism. :lol:

http://users.edpnet.be/tom/computer/2.jpg

Works great!

EDIT BY ADMIN: LARGE IMAGES >640px MUST BE LINKED ONLY!!!!

_________________
AM2 4000+ with XP-90 and Nexus 92mm | MSI K9N SLI Platinum | Corsair 2x1GB DDR2 PC6400 | MSI GF 7900GS Passive + Nexus 92mm | SBLive! Value | suspended WD 2500KS | Seasonic S12-500 | BenQ1620 | Plextor PX-W4012TA | Lite-On LH-20A1S | 2 Nexus case fans


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 30, 2007 2:03 pm 
Offline

Joined: Wed Aug 04, 2004 8:32 am
Posts: 489
Location: UK
TomMe wrote:
Here's my contraption. Made it about a year ago I think. A bit of elastic string (used for clothing), 6 metal pieces to hang it up, some screws, the bottom of a broken floppy drive for support and some zip ties as a fail safe mechanism. :lol:

Works great!


Do you notice any improvement if you remove the cable ties? I though they would transfer vibration?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 31, 2007 1:21 pm 
Offline

Joined: Tue Jul 31, 2007 9:46 am
Posts: 144
My approach is visible here.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 01, 2007 8:28 am 
Offline

Joined: Tue Jan 23, 2007 3:33 pm
Posts: 43
I remember seeing somewhere around this forum a design for suspension that consisted of a wooden frame (made of dowels?) with elastic in it. Anybody know where I can find this post, or a picture of it?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 01, 2007 8:59 am 
Offline

Joined: Sat Mar 17, 2007 3:17 am
Posts: 780
Location: Croatia
tsmvengy wrote:
I remember seeing somewhere around this forum a design for suspension that consisted of a wooden frame (made of dowels?) with elastic in it. Anybody know where I can find this post, or a picture of it?

I've been searching for that as well, but no luck :( I need to properly suspend the drives in my SLK3000B, and a custom wooden frame seems to be my best bet. I will probably still have to drill-out the bottom holder (why the obsession with rivets, I will never know).


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 01, 2007 9:37 am 
Offline

Joined: Wed Aug 04, 2004 8:32 am
Posts: 489
Location: UK
Matija wrote:
tsmvengy wrote:
I remember seeing somewhere around this forum a design for suspension that consisted of a wooden frame (made of dowels?) with elastic in it. Anybody know where I can find this post, or a picture of it?

I've been searching for that as well, but no luck :( I need to properly suspend the drives in my SLK3000B, and a custom wooden frame seems to be my best bet. I will probably still have to drill-out the bottom holder (why the obsession with rivets, I will never know).


You dudes mean this one?

http://www.silentpcreview.com/forums/vi ... 8d69ac72b0


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 01, 2007 10:25 am 
Offline

Joined: Sat Mar 17, 2007 3:17 am
Posts: 780
Location: Croatia
That's the one, thanks :)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 01, 2007 5:44 pm 
Offline

Joined: Tue Jan 23, 2007 3:33 pm
Posts: 43
amjedm wrote:
Matija wrote:
tsmvengy wrote:
I remember seeing somewhere around this forum a design for suspension that consisted of a wooden frame (made of dowels?) with elastic in it. Anybody know where I can find this post, or a picture of it?

I've been searching for that as well, but no luck :( I need to properly suspend the drives in my SLK3000B, and a custom wooden frame seems to be my best bet. I will probably still have to drill-out the bottom holder (why the obsession with rivets, I will never know).


You dudes mean this one?

http://www.silentpcreview.com/forums/vi ... 8d69ac72b0


Yeah, I think that's it. Might have been another one. I'm thinking about putting something like that in my slk1650B to get some suspension and improve airflow.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 16, 2007 2:02 am 
Offline

Joined: Mon Mar 20, 2006 6:23 am
Posts: 138
Location: Antwerp, Belgium
amjedm wrote:
Do you notice any improvement if you remove the cable ties? I though they would transfer vibration?

Sorry for the late reply. :) I have thought about that, but I think the effect of the zip ties is negligible. They're not tightened, otherwise the elastic string would be useless of course. They're just hanging there in case of failure. In any case, there are other sounds that suppress the one produced by my HDD.

_________________
AM2 4000+ with XP-90 and Nexus 92mm | MSI K9N SLI Platinum | Corsair 2x1GB DDR2 PC6400 | MSI GF 7900GS Passive + Nexus 92mm | SBLive! Value | suspended WD 2500KS | Seasonic S12-500 | BenQ1620 | Plextor PX-W4012TA | Lite-On LH-20A1S | 2 Nexus case fans


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 16, 2007 6:15 pm 
Offline

Joined: Thu Aug 02, 2007 7:05 pm
Posts: 4
My take on HD Suspension in a P180b:

Image

It's damn stable.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 18, 2007 6:40 am 
Offline

Joined: Thu May 25, 2006 1:19 am
Posts: 495
Location: Australia
before:
Image

after:
Image

Image

a little worried it'd fall, but its alot cleaner and spacious this way. temps and the noise coming through is about the same too.

anyone have doubts about the hdds orientation?


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 18, 2007 9:21 am 
Offline
*Lifetime Patron*

Joined: Sun Dec 21, 2003 11:24 am
Posts: 1736
Location: 'Sunny' Cornwall U.K.
porkchop wrote:
anyone have doubts about the hdds orientation?

You've obviously missed this thread. :lol:

Short answer: No.


Pete


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 12, 2007 2:38 pm 
Offline

Joined: Sun Feb 25, 2007 6:27 am
Posts: 99
Location: Sweden
Here's a pic of the disk in my HTPC :)

Image


Top
 Profile  
 
 Post subject: oh yeah!
PostPosted: Sun Sep 30, 2007 12:11 pm 
Offline

Joined: Tue Jul 24, 2007 3:57 pm
Posts: 312
Location: Minnesota
Image

1.8MM Stretch Magic. Worked Great! I think thinner would have been better and easier to work with, however.

_________________
Chris Randel
Network Administrator, Quiet Enthusiast.
Corsair 600t
Lian-Li Q08 FS
Lian-Li Q07 Pics
New - P183 Build


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 02, 2007 4:02 pm 
Offline

Joined: Thu Jul 22, 2004 4:10 am
Posts: 42
These have been floating around for a while, just figured I'd add them to this thread...my solution in the venerable Lian-Li PC-xxxx.

Image

Image


I found a bulk supplier for the o-rings, so I'm working on something very similar for my media/file server in a Coolermaster case. :D

_________________
1: San Diego @ 2.7 with Swiftech Storm, 1GB PDP 3200 @ DDR450, Asus A8N-SLI Prem, XFX 7800GT @ 486/1220 with DD Maze4, suspended WD740GD, TPII-480, heavily modded LianLi PC-6000
2: Northwood @ 2.66, 1x512MB Geil PC3500, ATI 9700Pro, 7K250, Shuttle SB61G2, soft-mounted 92mm Nexus fan, 240w 'quiet' PS, Zalman NB cooler


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 25, 2007 8:01 am 
Offline

Joined: Mon Feb 26, 2007 9:20 am
Posts: 3141
Location: Missing in Finnish wilderness, howling to moon with wolf brethren and walking with brother bears
Image

Its not pretty. Just prototype. Three 5,25" expansion slots sacrficed for suspensing Scythe QuietDrive that is has Samsung T-166 500gb HDD inside. Regular suspensioning wouldn't probably last 200 grams off hdd and 800+ grams grams of QuietDrive with just regular thing. I used folded bike innertube to suspend it safely. Bike innertube is strong enough, elastic but also ugly.

_________________
If seeing is believing, how can blind person believe in anything?
Maturity is just not experience in life but also ability to make compromises.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 440 posts ]  Go to page Previous  1 ... 6, 7, 8, 9, 10, 11, 12 ... 15  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: Baidu [Spider] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group