Samsung EcoGreen F2 500GB / platter is out!

Silencing hard drives, optical drives and other storage devices

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

alecmg
Posts: 204
Joined: Thu Mar 13, 2008 5:56 am
Location: Estonia

Samsung EcoGreen F2 500GB / platter is out!

Post by alecmg » Fri Dec 19, 2008 1:19 am

http://www.matbe.com/actualites/55691/s ... -ecogreen/
one platter and ecogreen and best platter density. Promises to be silent and fast

winguy
Posts: 447
Joined: Tue Nov 02, 2004 9:31 am

Post by winguy » Fri Dec 19, 2008 3:32 am

Its a 500GB single platter?

~50% jump in platter density against the WD10EADS but its STR is only marginally faster... (~80 vs ~75-77)

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

Post by NeilBlanchard » Fri Dec 19, 2008 8:18 am

Hi,

Here's a translation to Englishish.

AZBrandon
Friend of SPCR
Posts: 867
Joined: Sun Mar 21, 2004 5:47 pm
Location: Phoenix, AZ

Post by AZBrandon » Fri Dec 19, 2008 8:30 am

Well there's "out" and then there's general availability. I'm excited to see 500GB per platter already being demo'd, but I'll be more happy when I see it available in the general retail channels.

marius7
Posts: 33
Joined: Tue Jun 28, 2005 12:33 am

Post by marius7 » Fri Dec 19, 2008 1:32 pm

What about 7200rpm versions ?

jessekopelman
Posts: 1406
Joined: Tue Feb 13, 2007 7:28 pm
Location: USA

Post by jessekopelman » Fri Dec 19, 2008 1:54 pm

marius7 wrote:What about 7200rpm versions ?
This is meant to compete with Western Digital GP. Low noise/power = 5400RPM.

marius7
Posts: 33
Joined: Tue Jun 28, 2005 12:33 am

Post by marius7 » Sat Dec 20, 2008 2:47 am

jessekopelman wrote:This is meant to compete with Western Digital GP. Low noise/power = 5400RPM.
Yes, I've understood that but I wanna hear something about the 7200rpm models. A 7200 model with 500 GB per platter would give us another boost in performance. It's a +50% density so I hope I'll see at least +25% STR (so > 125 MB/s average read). And of course a price drop would be nice too.

Ksanderash
Posts: 353
Joined: Sat Oct 18, 2008 6:30 am
Location: Moldova, exUSSR

Post by Ksanderash » Sat Dec 20, 2008 3:03 am

marius7 wrote:Yes, I've understood that but I wanna hear something about the 7200rpm models. A 7200 model with 500 GB per platter would give us another boost in performance. It's a +50% density so I hope I'll see at least +25% STR (so > 125 MB/s average read). And of course a price drop would be nice too.
Hm, you are talking now just as a XtremeSystems participant ;) Look in the upper left corner for the abbreviation :P

marius7
Posts: 33
Joined: Tue Jun 28, 2005 12:33 am

Post by marius7 » Sat Dec 20, 2008 4:01 am

Ksanderash wrote:
marius7 wrote:Hm, you are talking now just as a XtremeSystems participant ;) Look in the upper left corner for the abbreviation :P
Yes and no. I'm looking for silent hardware beside the performance. And Samsung hard drives are silent even at 7200 rpm.

felix_w
Posts: 38
Joined: Tue Nov 21, 2006 5:09 am
Location: Athens, Greece

Post by felix_w » Mon Dec 22, 2008 7:44 pm

While the HD501IJ specs state "Max. 334GB Formatted Capacity per Disk", the HD502IJ specs do not have this string...so maybe this is the 7200rpm single platter equivalent of HD502HI ?

Cryoburner
Posts: 160
Joined: Sat Dec 01, 2007 4:25 am

Post by Cryoburner » Wed Dec 24, 2008 1:37 am

AZBrandon wrote:Well there's "out" and then there's general availability. I'm excited to see 500GB per platter already being demo'd, but I'll be more happy when I see it available in the general retail channels.
I remember last year when Samsung's 334GB platter drives were said to be 'shipping'. The first terabyte drives didn't show up for another six months, and the lower capacities weren't available in the US for nearly a year after the initial press release. In the mean time, WD released their own drives at a comparable platter density, though with less pre-release hype.

line
*Lifetime Patron*
Posts: 338
Joined: Wed Sep 28, 2005 10:07 pm
Location: Israel

Post by line » Wed Dec 24, 2008 8:07 am

I'm not impressed with the STR and random access time values in that HD Tune screenshot. If production drives do not see an improvement, I'll probably skip that series altogether. I'm looking forward to WD's next products based on 500GB platters.

Wibla
Friend of SPCR
Posts: 779
Joined: Sun Jun 03, 2007 12:03 am
Location: Norway

Post by Wibla » Wed Dec 24, 2008 4:16 pm

500GB platters + 5400rpm sounds about right for the performance numbers seen, i guess, maybe a bit on the low side..

felix_w
Posts: 38
Joined: Tue Nov 21, 2006 5:09 am
Location: Athens, Greece

Post by felix_w » Wed Dec 24, 2008 7:49 pm

Ah...it seems i was not right about the HD502IJ being the 7200rpm version of the II....it's probably just 2x250 :

http://forums.overclockers.co.uk/showth ... p=11661829


Only ~80MB/s read...

whiic
Posts: 575
Joined: Wed Sep 06, 2006 11:48 pm
Location: Finland

Post by whiic » Sun Dec 28, 2008 10:31 am

Just a brief summary of death and rebirth of 5400rpm desktop drives:
Reviving 5400rpm was radical. Before GreenPower the last big 5400-revver was ML16 300GB by Maxtor but it suffered from ball-bearings and otherwise old-tech. Other manufacturers also had 5400rpm drives but only for value line. Didn't Seagate have one? And Samsung had V-series along with P-series. These value lines were only available in low capacities and their availability in retail was non-existent (they were aimed at OEMs who wanted to save that extra 1 cent)... 300GB Maxtor was the only exception at this as it was Maxtors attempt to reach highest capacity at it's era. After that, Maxtor adopted fluid dynamic bearings to 5400rpm model and started using state of art platters (160GB instead of 66GB). These newer received any hype. I'm not sure if it was publicly announced anywhere. They weren't even available through retail channels. And only the 1-platter variant came available to few stores, the promised 2-platter 320-gigger never did. Maxtor got bought by Seagate, Seagate killed all Maxtor-designed product lines. At this point, I considered 5400rpm dead and I was sad about it.

When all hope was lost, WD did the unthinkable. And now even Samsung has revived it's V-series by naming them F2 EcoGreen. Well, not much to do with old V-series which was based on P-series casing (or the other way around) with cast aluminum top cover. F1 is a decendant of T-series, and so is F2 (most likely). I haven't even seen the F1 EcoGreen. It never received any hype and I came to know of it when F2 EcoGreen was paper launched on some French site. The 5400rpm models easy get ignored ...luckily F2 is the first paper launched 500GB/platter drive, and probably made many people aware of Samsungs 5400rpm line.

I hope the F2 hype will make F1 EcoGreen more easily available.

___


That was something I wrote to another topic but it got a bit derailed...

Anyway, aside from HD502HI (single platter, 500GB), has any upscales of F2 EcoGreen like 1000 or 1500 been speculated? Is this the P/V series cast aluminum casing (which can hold up to 2 platters)? Is this the modern T/F1-series casing (up to 3)? Or is this ultra-slimline PL-series casing (for only one platter)?

F1 EcoGreen is up to 1TB with 333GB/platter, thus T-series type construction.

EDIT: if the datasheet is to be trusted, height is 2.6cm, just above an inch. That corresponds to "low-profile", i.e regular HDD size (slimline is "ultralow-profile"... though sometimes low-profile is called slimline as well). It's only because full height is the size of two CD-drive bays, half height is the size of one CD-drive bay, low-profile is thinner than CD-drive (normal HDD), etc. It's all because of archaic size categories from 20...30 years in history.

Ultralow-profile HDD (such as PL40 or DiamondMax 8) is approx. 1.8cm in height.

EDIT: 8) =

Code: Select all

8)
Last edited by whiic on Sun Jan 04, 2009 10:31 am, edited 1 time in total.

Shamgar
Posts: 454
Joined: Wed Oct 22, 2008 8:49 am
Location: Where I Am

Post by Shamgar » Fri Jan 02, 2009 10:48 pm

marius7 wrote:Yes and no. I'm looking for silent hardware beside the performance. And Samsung hard drives are silent even at 7200 rpm.
I don't think this is an unreasonable expectation. It is, unfortunately, shot down many times in the forums. Don't be foisted into accepting other persons' choices where it may end up being unsatisfory for you.

While I don't think any HDD is 'silent' (some noise is always present even after soft mounting and damping--depends on whether you can hear it over other noise, or go looking for the noise), I would choose a 7200 drive if it was equally as quiet as a 5400 one but with a distinct improvement in performance. Many users on these forums have complained that the WD GP's seek noise is quite audible, even though it is a slower spindle speed drive.

If you are moving lots of data, run a DAW, or do full system backups, a higher performance drive to me is preferable to a slower one. However, if you are running an automated system, 24/7 machine, or HTPC, then performance and speed matters not as much since you are not physically there waiting for it to finish. The lower power use of a 5400 may also be regarded as a benefit in these situations. I only need to do manual backups and do so while I am physically at my computer, where a quiet/good performing 7200 drive like WD6400AAKS gets the job done quickly, and lets me shut down and do something else with my day.

Having said that, I recently bought a Samsung 1 platter 2.5" drive to test as a system drive for my new computer. Being in a hot ambient environment, I saw the advantage of using a low power, low heat drive, as I care about HDD temperatures as well as power consumption.

As for Samsung's Ecogreen 500GB platter drives, I think it is a welcome move on their part and for the market also. WD GP needs some competition--they shouldn't have the cake all to themselves.

Samsung HDD retail availability is okay where I live. Some models are often on a backorder basis. Prices are usually the best value. WD GP drives are stupidly expensive here, unless you managed to grab a bargain from a store willing to make 5 cents per drive profit or a loss in some cases.

From my own experience, Samsung drives are better made and packaged to the consumer than a WD equivalent. Samsung drives are mostly made in their own country, Korea, whereas WD outsources to Thailand and Malaysia for manufacturing. (I'd definitely go for a Made in Malaysia drive over a Thailand one if I had the choice.) Samsung pack it in a clamshell package with manual and screws for the average user, while WD pack it in a standard anti-static bag only. This does not make a difference to the experienced user, but for the average one, it shows a lot more thought for them on Samsung's part.

whiic
Posts: 575
Joined: Wed Sep 06, 2006 11:48 pm
Location: Finland

Post by whiic » Sat Jan 03, 2009 7:29 am

Availability varies greatly. Here in Finland GP drives have been cheap, even cheaper than F1. (Even though F1 is much cheaper than Seagates and Hitachis or 7200rpm WDs.)

Then it comes to Samsung's Ecogreen, I wasn't even aware of Ecogreen F1 until all the fuzz about Ecogreen F2's high density platters. I started looking for F1 Ecogreen and I didn't find a single retailer for F1 EG in whole country. Greenpower remains the only 5400rpm drive on the local market (incl. Finnish e-tailers).

I hope the hype of F2 Ecogreen's high density will make F1 and F2 EGs more easily available so that WD wouldn't be the only choice for near-silent highcapacity/low-cost storage (i.e outruling 2.5" storage and SSDs). Though, even without possibility to obtain Ecogreens, I'm fairly happy that at least Greenpowers are available. A year ago I could have only dreamed of anything spinning at 5400rpm.

aztec
Posts: 443
Joined: Mon Dec 12, 2005 5:01 am
Location: Foster City, CA

Post by aztec » Sun Jan 04, 2009 3:07 am

any news on Samsung or WD, single-platter 500GB drives?

Seagate is out...but its Seagate. :D

Mech0z
Posts: 41
Joined: Wed Feb 20, 2008 6:35 am
Location: Denmark

Post by Mech0z » Wed Jan 07, 2009 12:29 pm

Year I hope these are released soon so WD can get some competition even though the prices for GP drives are very low, but competition = innovation.

Plus 500Gb platters should make 1.5Tb possible pretty easy and even 2Tb.

I am just wondering if the price/Gb will be as low as the 1Tb drives one 1.5/2.0 Tb drives are released.

inti
Posts: 118
Joined: Thu Feb 10, 2005 7:09 am
Location: here

Post by inti » Tue Jan 13, 2009 4:31 am

Here is the full range of F2:
http://www.samsung.com/global/business/ ... subtype=78

HD502HI - 500GB
HD102SI - 1TB
HD103SI - 1TB
HD153UI - 1.5TB
HD154UI - 1.5TB

I don't know what the difference between the models is - all look to have same spin speed and 32MB cache, for example.

Just a guess here, all of these will have 5400rpm spin speed because Samsung have a technological problem reading high-density 500GB platters with enough consistent reliability at 7200rpm?

Of course, data density is so high that spin speed does not hugely matter if this is used as a media drive (or for near-line storage), although it makes a big difference to seek speeds so I would not use this for an OS partition.

Ideal storage, for speed and silence:
1GB or more ramdrive, for swap file and temp folders
240GB solid state drive for boot, OS and installed programs
one or more 1TB Samsung F2 for bulk storage?

felix_w
Posts: 38
Joined: Tue Nov 21, 2006 5:09 am
Location: Athens, Greece

WD HDD 2TB to launch this week

Post by felix_w » Tue Jan 13, 2009 7:32 am

WD20EADS the 2TB model of WD is going to be launched this week according to :

http://en.expreview.com/2009/01/13/west ... #more-1927

Hopefully Samsung & Seagate have something to show also...

..and hopefully they update their lower models with 500GB-plattered ones soon (Seagate is releasing 7200.12-500GB-plattered models end January)...

zendragon
Posts: 12
Joined: Mon May 05, 2008 6:43 am
Location: Portugal

Post by zendragon » Wed Jan 14, 2009 6:19 am

Does anyone know already if the f2 ecogreen 500gb is quieter than westerndigital green?
Silentpcreview does not get samsungs to review as far as I know.

Engineer
Posts: 20
Joined: Sun Aug 27, 2006 6:56 pm

Post by Engineer » Wed Jan 14, 2009 5:51 pm

http://www.nowdirect.com/exec/partInfo/ ... SADHD502HI

Is this the drive (it seems it is)?

$49.99 + shipping is not bad for a new single platter drive...even though it's 16MB cache and 5400 rpm.

zendragon
Posts: 12
Joined: Mon May 05, 2008 6:43 am
Location: Portugal

Post by zendragon » Wed Jan 14, 2009 8:14 pm

Yes so it seems by the part number. I wonder why some retailers keep saing it's f1 instead of f2.

warriorpoet
Posts: 323
Joined: Wed Jul 20, 2005 10:56 am
Location: USA

Re: WD HDD 2TB to launch this week

Post by warriorpoet » Sat Jan 17, 2009 3:30 pm

felix_w wrote:WD20EADS the 2TB model of WD is going to be launched this week according to :

http://en.expreview.com/2009/01/13/west ... #more-1927

Hopefully Samsung & Seagate have something to show also...

..and hopefully they update their lower models with 500GB-plattered ones soon (Seagate is releasing 7200.12-500GB-plattered models end January)...
These are already out. Newegg has 'em.

felix_w
Posts: 38
Joined: Tue Nov 21, 2006 5:09 am
Location: Athens, Greece

Post by felix_w » Sat Jan 17, 2009 11:01 pm

Would you mind posting the link to the newegg's page ? It seems i could not find it...

PCMonkey
Posts: 9
Joined: Thu Aug 12, 2004 9:03 pm

Post by PCMonkey » Sun Mar 08, 2009 1:14 am

I just noticed the HD502HI is live at newegg

http://www.newegg.com/Product/Product.a ... 6822152137

Auroa
Posts: 27
Joined: Sun Jan 23, 2005 8:41 pm

Post by Auroa » Sun Mar 08, 2009 3:06 am

I have the hd502hi. It's mounted to a very poor (in terms of vibration/sound dampening) aluminum case.

Vibration is virtually non-existent.

Idle noise is present. In addition to a typical hum, mine has a high-pitched whine - probably not normal. Somewhat disappointed considering the spec sheet listed idle noise at 2.2 bels (22db).

Seek noise is also audible, aam or not. aam seems useless to my ears. Spec sheet lists 2.7 bels (27db), which sounds about right.

Performance is admirable, I think. 5.9 on the Vista index, which is higher than my previous 7200 rpm drive. aam causes slight hitches.

Temperature is ridiculous. After using seagate drives for years, I thought speedfan wasn't working correctly when I got readings of 19C. The drive is barely warm to the touch.

I'd give the drive an A-. The only fault is idle noise being louder than expected. Your noise results will probably be better because your drive won't be mounted with plastic rails onto a crappy case.

aztec
Posts: 443
Joined: Mon Dec 12, 2005 5:01 am
Location: Foster City, CA

Post by aztec » Mon Mar 09, 2009 9:04 am

I'm still waiting for a single-platter 500GB 7200RPm from either WD or Samsung. The new generation HDs are quiet enough for me, even at 7200RPM.

~El~Jefe~
Friend of SPCR
Posts: 2887
Joined: Mon Feb 28, 2005 4:21 pm
Location: New York City zzzz
Contact:

Post by ~El~Jefe~ » Mon Mar 09, 2009 10:50 am

You know...... I thought this too for a long time.

Now I finally got a block for my 3870 ati card and running a zalman reserator setup on gpu/cpu. hm. I have an S-flex mid speed 120fan on rear, a passive antec psu. nothing else moves. its not being picky but I can tell that a very annoying sound eminates from a humming hd. I have a samsung 320gb drive that was recommended at the time. Its on rubber grommets, but the vibrations still transmit. it's really annoying. I am considering a raptor, but its kinda expensive at 300gb's.

Post Reply