I have a Gainward video card (650 XP Pro or something) using a GeForce 4 MX440. The fan is very loud.
Any suggestions? I have quieted all the other components (Seasonic PSU, NMB fans, Arctic Cooling CPU cooler) and need some help. Thanks!
Need help w/ quiet cooling for Gainward MX-440
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 35
- Joined: Fri Mar 21, 2003 7:59 pm
You can try the Zalman ZM-50 HP. There's a larger version (80 HP and 80A HP). But since you have an MX card, the ZM-50 looks like it would be sufficient if you're on a budget.
Here's a link to the ZM 50:
http://www.zalman.co.kr/english/product/zm50-hp.htm
Here's a link to the ZM 50:
http://www.zalman.co.kr/english/product/zm50-hp.htm
-
- Patron of SPCR
- Posts: 798
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Akron, OH (The Rubber Capital)
- Contact:
The heat from the MX440 is pretty insignificant. You could easily get away with the ZM17 as well. More permanent, but I bet you could find it cheaper.
http://www.zalman.co.kr/english/product/cnpsvga2.htm
http://www.zalman.co.kr/english/product/cnpsvga2.htm
-
- Posts: 35
- Joined: Fri Mar 21, 2003 7:59 pm
Zalman coolers
Thanks, I'll check those out.
-
- Posts: 35
- Joined: Fri Mar 21, 2003 7:59 pm
$5
SVC has both products. The ZM17 is $20 while the ZM80 is $25, only $5 more. The ZM80 looks massive and I'm concerned about room in the case. Might try the ZM17 since the ZM80 is likely overkill.
I was also thinking of just mounting an 80mm NMB fan in the next slot and have it blow air on the unplugged gpu fan (which has cooling fins) ...
I was also thinking of just mounting an 80mm NMB fan in the next slot and have it blow air on the unplugged gpu fan (which has cooling fins) ...