Where to send Sanyo San Ace 120 mm fan for review?

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
gbyss00
Posts: 11
Joined: Mon Apr 06, 2009 10:21 pm
Location: USA

Where to send Sanyo San Ace 120 mm fan for review?

Post by gbyss00 » Mon Apr 06, 2009 10:32 pm

I have some Sanyo Denki San Ace 120 mm X 38 mm fans and would like SPCR to review them. Model # is 109R1212H1011

I also have Nidec beta V model # B31256-33A for the review.

I will ship 2 of each and pay for the shipping.

To where and to whom should i ship to?

Here is spec for Sanyo one

SPECIFICATIONS:



Part Number................................. 109R1212H1011
Manufacturer................................ Sanyo Denki Co., Ltd., Japan
Size, In........................................ 4.73" X 4.73" X 1.50"
Size, mm..................................... 120mm x 120mm x 38mm
Voltage........................................ 12 volts DC
Operating Range............................. 10.2 - 13.8
Current......................................... 0.52A
Watts............................................ 6.24
RPM ............................................. 2600
Flow CFM (Max)............................ 102.4 CFM / 2.9 cu metre[m3]
Static Pressure (in. H20)................ 64.7Pa (6.6mm)
Noise (dBA).................................... 39.0
Bearing Type................................... Dual Ball Bearing
Material-Venturi............................... UL94V-0 Plastic
Material-Propeller............................. UL94V-0 Plastic
Power Leads.................................... 3- 12",22AWG BARE Leads
Termination ..................................... BARE LEADS, Connectors OPTIONAL
Life Expectancy-MTBF....................... 60,000 Hours

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

Post by NeilBlanchard » Tue Apr 07, 2009 6:27 am

Hi,

Here's a thread on this:

viewtopic.php?t=10838&highlight

You can send them in, but there is no guaranty that they will get a review.

Until and if they get an official review, why don't you post your opinion and comparisons?

[Edit: at 2600RPM and 39dBA, they are not likely to be considered quiet, or even tolerable...]

Post Reply