Scythe Slip Stream Slim

spc · Post by **spc** » Wed Jun 17, 2009 6:40 pm

http://www.tcmagazine.com/comments.php? ... 90&catid=2

... the fans weight 98 grams, are just 12mm thick ...

- SY1212SL12SL - 800 RPM | 19.40 CFM | 19.53 dBA
- SY1212SL12L - 1,200 RPM | 24.03 CFM | 21.71 dBA
- SY1212SL12M - 1,600 RPM | 38.05 CFM | 28.89 dBA
- SY1212SL12H - 2,000 RPM | 45.47 CFM | 37 dBA

Ch0z3n · Post by **Ch0z3n** » Wed Jun 17, 2009 8:08 pm

Could be nice, I don't really know where you would use them.

maxu · Post by **maxu** » Thu Jun 18, 2009 12:23 am

I, for instance, could slip one between the hard drives and the ninja.
It's a tight space, and a regular 25mm cannot fit. But untill they'd appear in Romania, maybe I'll have a different setup.
It's a niche market, but it exists, therefore, people will buy them. Think of any other situations where a few milimeters matter.

Ch0z3n · Post by **Ch0z3n** » Thu Jun 18, 2009 4:49 am

Fair enough, I guess I've just never worked with a case that cramped. I have no doubt people will buy them; the question is, when they buy them, would they have been better off just buying a standard depth fan?

Matija · Post by **Matija** » Thu Jun 18, 2009 5:30 am

Well, placing those on Acceleros would be nice.

thejamppa · Post by **thejamppa** » Thu Jun 18, 2009 5:49 am

Or in lower HDD compartment in P182 where 25mm thick can't fit...

Or Side panel of Three Hundred if you use Accelero based system 25mm thick fan is too thick but that slim would go.

greenfrank · Post by **greenfrank** » Thu Jun 18, 2009 9:47 am

I have (just tried, not installed) the 10cm version of this. I'ts nice for small spaces, very quiet, but airflow is too low.

thepwner · Post by **thepwner** » Thu Jun 18, 2009 9:14 pm

Holy screw...think as F

mascotzel · Post by **mascotzel** » Tue Jun 23, 2009 2:09 am

they are very usefull for accelero S1
they cover all it's surface and a bit more (I have 2*100mm slim kaze jyuni on my accelero,and there is still some room left) and keeps the overall thickness of the cardaccelero to 3 slots only (and decent space to get it's airflow)