Page 1 of 1
Are brushless 80mm Adda fans crap?
Posted: Wed Jul 09, 2003 12:26 pm
by frosty
I replaced the fans in my pc with panflo 80L's and noticed the ones I pulled out of the front grill and psu are Adda's brushless - are they total crap fans or usable as cooling fans cooling graphics card or to run over my hard drive for extra cooling until I can get more panflo's?
Posted: Wed Jul 09, 2003 12:46 pm
by cpemma
Adda make some very nice fans, but you may have the M or H model, which like Panaflo M & H are noisier than L.
Code: Select all
Adda Fans
Model, V A W, RPM, CFM, mmAq dBA
AD0812UX-A71GL 12 0.45 5.4 3900 50 6.81 40.6
AD0812HX-A70GL 12 0.25 3 3010 38.6 4.06 34
AD0812MX-A70GL 12 0.15 1.8 2440 31.4 2.9 28.3
AD0812LX-A70GL 12 0.12 1.44 2030 26.2 1.98 22.5
AD0812DX-A70GL 12 0.08 0.96 1600 20.5 1.27 15
Posted: Wed Jul 09, 2003 2:30 pm
by frosty
Thanx for the info so I guess unless they are lx or dx then I may be better off in the end with Panflo's
Posted: Wed Jul 09, 2003 6:42 pm
by UHT
If it helps at all then the fans that came out of my PC-7 were the LX's.
Posted: Thu Jul 10, 2003 6:20 am
by frosty
Yes I thouhgt about if it is really only running or putting out 22 or 28 db of using one of them on my cpu which I think is putting out over 34 db but I don't have the intestinal fortitude to risk the heat.