Noctua goes PWM with new 80mm, 92mm and 120mm models

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
lodestar
Posts: 1683
Joined: Fri Aug 05, 2005 3:29 am
Location: UK

Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by lodestar » Fri Dec 02, 2011 10:22 am

The Noctua website is now listing PWM versions of most of the existing range:

NF-R8 PWM 80mm - rpm range 300 to 1800, or 300 to 1300 with Low-Noise Adapter (LNA)

NF-B9 PWM 92mm - 300 to 1600, or 300 to 1300 with LNA

NF-P12 PWM 120mm - 300 to 1300, or 300 to 900 with LNA

For further information see http://www.noctua.at/main.php?show=produkte&lng=en#fans.

These fans are not part of the focussed flow range which currently consists only of the NF-F12 model.

Jim Byram
*Lifetime Patron*
Posts: 50
Joined: Wed Feb 25, 2004 2:29 pm
Location: west of Boston, MA

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by Jim Byram » Sat Dec 03, 2011 7:55 am

They also have a focused flow NF-F12 PWM.
http://www.noctua.at/main.php?show=prod ... =42&lng=en

And here is the existing SPCR topic...
viewtopic.php?f=9&t=63397

lodestar
Posts: 1683
Joined: Fri Aug 05, 2005 3:29 am
Location: UK

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by lodestar » Sat Dec 03, 2011 12:53 pm

The focused flow NF-F12 is just coming on sale in the UK, and is priced at £19 which makes it one of the more expensive PWM fans on the market. However, it does come with an extension cable and Y adapter as well as the LNA, which helps offset the cost to some extent. According to Noctua the same accessories will be supplied with the non focused flow NF-R8, NF-B9 and NF-P12 PWM fans so it will be interesting to see how they are priced once available.

Mr Spocko
Posts: 229
Joined: Sun Jul 10, 2011 1:56 pm
Location: UK/Eire

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by Mr Spocko » Wed Jan 04, 2012 1:02 pm

The NF-B9 is a bit of a let down airflow to noise wise. The PWM is just a version of the same one.
Really only 2 Notcua fans are worth a look the NF-S12B flex (for options all round) and the ULN 120mm version for a quiet slower speed straight out of the box fan.

I can't say I care much for the NF-R8 either

I will say this though Noctua and their sound figures don't reflect real world use

Lsv
Posts: 108
Joined: Sun Dec 11, 2011 9:50 pm

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by Lsv » Fri Jan 06, 2012 7:40 pm

Mr Spocko wrote:The NF-B9 is a bit of a let down airflow to noise wise. The PWM is just a version of the same one.
Really only 2 Notcua fans are worth a look the NF-S12B flex (for options all round) and the ULN 120mm version for a quiet slower speed straight out of the box fan.

I can't say I care much for the NF-R8 either

I will say this though Noctua and their sound figures don't reflect real world use
Agreed, overpriced IMO. But you're paying for them to last as well.

Arbutus
Posts: 234
Joined: Wed Jun 02, 2010 9:15 pm
Location: Calgary, Alberta, Canada

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by Arbutus » Fri Jan 06, 2012 8:31 pm

The NF-P12 PWM is very interesting:

"Low-Noise Adaptor
The NF-P12 PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 1300 to 900rpm. The L.N.A can be used either to run the fan at a fixed speed of 900rpm or to cap the maximum speed when using automatic PWM control.

Extensive Cabling Options
The fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows to connect a second NF-P12 fan to the same PWM fan header for automatic control.
"

NCIX.com has stock at some locations in Canada for CAN$ 23.99 which is a high price if you don't need the adapters. The Scythe 120mm Slip Stream Kaze-Jyuni PWM Fan is CAN$ 9.99 at memoryexpress.com

lodestar
Posts: 1683
Joined: Fri Aug 05, 2005 3:29 am
Location: UK

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by lodestar » Thu Jan 12, 2012 2:43 am

Product showcase Noctua NF-P12 PWM 120mm Fan
http://www.youtube.com/watch?v=iQd4dEV0 ... ure=relmfu

Product Showcase Noctua NF-B9 PWM 92MM Fan
http://www.youtube.com/watch?v=kibQvphr ... ure=relmfu

Product showcase Noctua NF-R8 80mm PWM fan
http://www.youtube.com/watch?v=t6rFHKHA ... ure=relmfu

fyleow
Posts: 175
Joined: Sun Sep 11, 2005 4:23 pm
Location: California, USA

Re: Noctua goes PWM with new 80mm, 92mm and 120mm models

Post by fyleow » Thu Jan 12, 2012 9:39 am

120mm model is interesting because it's the slowest PWM fan currently available when you put on the low noise adapter. It's good for those with aggressive motherboard fan controls. I'd love to give it a shot, but not for $24 each.

Post Reply