It is currently Mon Aug 03, 2015 6:21 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Phanteks 'Successor' to the PH-F140HP; the PH-F140SP
PostPosted: Sun Jul 27, 2014 4:30 am 
Offline

Joined: Thu Jul 24, 2014 9:53 pm
Posts: 24
http://www.silentpcreview.com/article1345-page4.html
http://www.phanteks.com/PH-F140HP.html
Speed (RPM) 600 - 1300 ± 250 rpm
Max Airflow 40.9 - 88.6 CFM
Acoustical Noise 15.22 - 19 dB(A)
Static Pressure .39-1.64mm H2O

The PH-F140HP did very well in the SPCR article, but since then SP models have arrived (Static Pressure models, I assume, though they have similar specs, just 100rpm less max RPM) which look very similar apart from a colour switch and the addition of LEDs. It would be interesting to know whether they perform the same acoustically. I've tried searching on here to no avail (probably because of the specific codes).

http://www.phanteks.com/PH-F140SP.html
Speed (RPM) 1200 ± 250 rpm
Max Airflow 82.1 CFM
[b]Acoustical Noise 19 dB (A)
Static Pressure [/b]1.33mm H2O

I can only find one review (http://www.hitechlegion.com/reviews/coo ... l=&start=3) which rate them highly, but I'm not sure on trusting just the one.

--

Does anybody have experience with these or can point me in the direction of more information with these as to their relative performance to the PH-F140HP?


Top
 Profile  
 
 Post subject: Re: Phanteks 'Successor' to the PH-F140HP; the PH-F140SP
PostPosted: Sun Jul 27, 2014 4:42 pm 
Offline

Joined: Thu Jul 24, 2014 9:53 pm
Posts: 24
Okay so after a bit more research I've answered my own question really. This isn't a successor, it is an addition to their fan range along with the 140XP. In increasing order of static pressure: HP-SP-XP, so I have been told. The HP has 120mm mounts whilst the SP has 140mm mounts and slightly different rubber grommets for the anti vibration. Performance seems to be similar because of the same basic design, but no hard figures or tests are available yet.

Just in case anybody else was wondering.


Top
 Profile  
 
 Post subject: Re: Phanteks 'Successor' to the PH-F140HP; the PH-F140SP
PostPosted: Sun Jul 27, 2014 7:22 pm 
Online

Joined: Tue Nov 02, 2004 12:22 pm
Posts: 2213
Location: Guatemala
The XP is also PWM, not sure if the others are or not, Phantek has a very cool tech into where they transition PWM singal into voltage controlled, this was present in some of their coolers and now in their cases. But the Phanteks 140mm Case/Radiator Cooling Fan (PH-F140XP_BK) i tested, was pure PWM.

_________________
GameMiv2 >> MSI Z87-GD65 | Intel Core i7-4790K | Thermalright Silver Arrow IBE + 3x Prolimatech Ultra Sleek Vortex 14 | Crucial Ballistix Sport 32GB DDR3 1600 | 2x MSI GTX980Ti Gaming | ACER B326HK 32'' 4K IPS | Samsung 840pro 512GB | WD RED 3TB | Silverstone FT05 + 2x Silverstone AP182 | SeaSonic SS-860XP2
Other builds ---> ServeMi | CamMi | MiniMi | HTPCMi


Top
 Profile  
 
 Post subject: Re: Phanteks 'Successor' to the PH-F140HP; the PH-F140SP
PostPosted: Fri Jul 03, 2015 8:09 am 
Offline

Joined: Sat Feb 23, 2013 6:57 am
Posts: 3
i know this is a 1-year old thread, but the successor to the PH-F140HP is now out.

It is called the PH-F140HP II

has anyone heard of any reviews yet?

is silentpcreview planning on doing a review?

thanks guys 8)


Top
 Profile  
 
 Post subject: Re: Phanteks 'Successor' to the PH-F140HP; the PH-F140SP
PostPosted: Wed Jul 08, 2015 6:41 am 
Offline

Joined: Tue Jul 07, 2015 4:38 pm
Posts: 6
Elbow wrote:
i know this is a 1-year old thread, but the successor to the PH-F140HP is now out.

It is called the PH-F140HP II


I just bought two of these fans and am extremely pleased with them so far. Essentially inaudible and they do at 450 RPM what my SP120's did at 800~. The 120 mounts are kind of annoying so I might return mine and get PH-F140XP's if they are the same exact fan just with different mounts.


Top
 Profile  
 
 Post subject: Re: Phanteks 'Successor' to the PH-F140HP; the PH-F140SP
PostPosted: Sun Jul 12, 2015 5:57 am 
Offline

Joined: Thu Mar 31, 2011 5:04 am
Posts: 20
Location: Finland
Yeah, the successors are the HP II / MP.
Coolingtechnique had a look at the F120MP and F140HP II.
http://coolingtechnique.com/recensioni/ ... l=&start=5

Great performance and acoustics in my honest opinion. Might consider trying the F140MP's in the front of my Define R5.
Sound pressure wise F140HP II quieter than A14 at roughly the same RPM and moves more air + generates more static pressure.

Thermalbench looked at F120MP and F140MP
http://thermalbench.com/2015/01/07/phan ... 40mp-fans/

Hope someday in the future SPCR could be able to take a look at the MP's.

P.S. Coolingtechnique has changed their method of recording sound samples and videos onward from 1st of July will not be comparable to previous videos.
https://www.youtube.com/user/CoolingTechnique/videos

Philbro wrote:
Elbow wrote:
i know this is a 1-year old thread, but the successor to the PH-F140HP is now out.

It is called the PH-F140HP II


I just bought two of these fans and am extremely pleased with them so far. Essentially inaudible and they do at 450 RPM what my SP120's did at 800~. The 120 mounts are kind of annoying so I might return mine and get PH-F140XP's if they are the same exact fan just with different mounts.


You bought the HP II's? If you want the native 140 equilevant then that is the F140MP, not XP.

I gotta say that Phanteks naming model is not that easy to understand..
But if we look at 120/140mm sizes then there are basically two different designs.

7 blades with MVB 2
F120MP (120mm, PWM, 500-1800rpm)
F140MP (140mm, PWM, 500-1600rpm)
F140 HP II(140mm round frame, PWM, 500-1600rpm)

9 blades with MVB
F120XP (120mm, PWM, 500-1500rpm)
F120SP (120mm, 3pin, 1300rpm)
^basically the same, other PWM other 3pin
F140XP (140mm, PWM, 600-1200rpm)
F140SP (140mm, 3pin, 1200rpm)
^basically the same, other PWM other 3pin
F140HP (140mm round frame, PWM, 600-1300rpm)

And then there's the 9 blades with MVB and triangle struts
F120S (120mm, 3pin, 1300rpm)
F140TS (140mm, 3pin, 1200rpm)

Edit: Might as well note that their Updraft Floating Balance bearing is a rifle bearing. Verified that through email from Phanteks a while back. Me asking if it's a ball bearing was because someone on OCN was thinking the UFB is bb.

_________________
HTPC: Intel DH77EB | Intel Pentium G2120+NH-U12P w/o fan | HD5670 w/ Accelero S1r2 | SS-400FL V2 | 8GB DDR3 1600 CL9 1.35v | Lian Li PC-A05N+Slip Stream ~300rpm+Gentle Typhoon ~600rpm | Samsung 830 64GB | WD1001FALS
Work: Asus MIVGZ | 3770K w/ HR-02 Macho | EVGA GTX 670 | Seasonic 660W Platinum | 16GB DDR3 | Define R5+2x GP14@5V+NF-A14 PWM | Crucial BX100 250GB | WD30EFRX


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group