Silent fan: 140mm with 120mm fan mounting for Cryorig C1 ?

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
silentbobbo
Posts: 108
Joined: Sat Mar 31, 2007 1:45 am

Silent fan: 140mm with 120mm fan mounting for Cryorig C1 ?

Post by silentbobbo » Thu Aug 24, 2017 1:22 pm

I am in need of a fan for my Cryorig C1 (140mm fan but with the mounting measurements that a 120mm fan would have).

Silent (HTPC is inside my bedroom)
24/7
Energy efficient
For Intel G4600

So far I could find:
Phanteks PH-F140HP PWM (discounted, but seems like I can still get one)
Phanteks PH-F140HP II PWM (no idea if it is any good)
Thermalright TY-147A PWM
Thermalright TY-147B PWM (no idea what is different compared to TY-147A)
Noctua NF-A15 PWM
Cryorig XF140

But which of those is the best (silent + good cooling + lifetime)?
Or is there another fan you would recommend me?

Thanks in advance !

Abula
Posts: 3662
Joined: Tue Nov 02, 2004 12:22 pm
Location: Guatemala

Re: Silent fan: 140mm with 120mm fan mounting for Cryorig C1

Post by Abula » Thu Aug 24, 2017 1:34 pm

I have used multiple ty147a for lots of builds an been great, recently I bought some ty147b which suppose to have an upgraded bearing, and a the frame has incisions, thermalright claims is one DB quieter... To me it's the same. I would recommend either of them, but do remember you will need to control them via pwm to drop them to inaudible levels at full 1300 rpms are very noticeable.

silentbobbo
Posts: 108
Joined: Sat Mar 31, 2007 1:45 am

Re: Silent fan: 140mm with 120mm fan mounting for Cryorig C1

Post by silentbobbo » Thu Aug 24, 2017 10:31 pm

Thanks, and how would u say do tue TY-147A/B compare to the Noctua NF-A15 PWM

Abula
Posts: 3662
Joined: Tue Nov 02, 2004 12:22 pm
Location: Guatemala

Re: Silent fan: 140mm with 120mm fan mounting for Cryorig C1

Post by Abula » Thu Aug 24, 2017 10:37 pm

silentbobbo wrote:Thanks, and how would u say do tue TY-147A/B compare to the Noctua NF-A15 PWM
Well i have owned both in different times, but i didnt compare them directly. The NF-A15 PWM can drop near to 200rpms from what i remember and can go up toward the 1200rpms (the included on heatsinks can go to 1500rpms), and i have no bad things to say about it, but i prefer the TY147A because of its colors, one thing to note is the NF-A15 on noctua coolers uses the trianglues to lay on the heatsink so you dont need to add any ruber like with most fans, but this is something that not all do.

Someday, if i manage to do a semi pro chamber i might test fans, i had the project for a long time, but things have gotten in the way, for me most of the fan specs are worthless, to me there only two outcomes of a fan, cooling and noise, so thats what i would like to measure and compare the fans, at a given db what temps you get and plotting a graph, then compare all fans, but this is still very far away, i dont have a place where i can measure low enough.

silentbobbo
Posts: 108
Joined: Sat Mar 31, 2007 1:45 am

Re: Silent fan: 140mm with 120mm fan mounting for Cryorig C1

Post by silentbobbo » Fri Aug 25, 2017 9:44 am

Hmm I wont be using the NF-A15 on a noctua cooler but the Cryorig C1..so I should use some rubber to help against vibrations?

Color is no concern to me. Just want the most silent, best cooling and longest living fan for a reasonable price.

The TY147A can go down to 300rpm too (according to specs) but it is only meant for ~50.000hours usage while Noctua says 150.000hours...not sure if that is a concern though.

Abula
Posts: 3662
Joined: Tue Nov 02, 2004 12:22 pm
Location: Guatemala

Re: Silent fan: 140mm with 120mm fan mounting for Cryorig C1

Post by Abula » Fri Aug 25, 2017 8:30 pm

silentbobbo wrote:Hmm I wont be using the NF-A15 on a noctua cooler but the Cryorig C1..so I should use some rubber to help against vibrations?
Probably, but i never seen much vibration on either, that said it doesnt hurt to have it.
silentbobbo wrote:The TY147A can go down to 300rpm too (according to specs) but it is only meant for ~50.000hours usage while Noctua says 150.000hours...not sure if that is a concern though.
50K vs 150k idk, to me its more marketing, that said noctua does have very good CM, one of my NF-A14 PWM was defective with some off center wobble, and they sent me a new one =), so i would think they would exchange it as long as you have proof of purchase and you bought it from an autorized reseller. Btw Bequiet sielntwing3 fans have 300K

Post Reply