MSI K8N Neo Platinum and Cool 'n Quiet
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
MSI K8N Neo Platinum and Cool 'n Quiet
Is anyone using Cool 'n Quiet successfully on this board? I'm using it with an Athlon 64 3000+. I have CnQ enabled in the BIOS, the AMD driver is loaded, and I have the power management set on Minimal. However, MSI's CoreCell utility as well as WCPUID are indicating that it's only dropping to 200x9 from the 200x10 full speed.
Any suggestions? I believe this CPU should drop down to something like 1GHz when idle.
Any suggestions? I believe this CPU should drop down to something like 1GHz when idle.
-
- Posts: 216
- Joined: Mon May 24, 2004 10:42 pm
- Location: Canada
Re: MSI K8N Neo Platinum and Cool 'n Quiet
I'm thinking of getting an MSI Athlon board, so hopefully someone has an answer to this.Matt-man wrote:Any suggestions? I believe this CPU should drop down to something like 1GHz when idle.
-
- Posts: 19
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Lund, Sweden
Same here. Cheapest 3200 ram available (Corsair value) 2x512mb. Yes, that's two slots.sammermpc wrote:I'm running an MSI K8t neo-fis2r. I know pretty different, but my CnQ works fine, multiplier drops to four.
I only had a single problem with dual slots: I had to change the locations of the memory from -XX to X-X or XX-.
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
2 new questions
Hello:
Has anybody tried running all three RAM slots at DDR400? If so, what RAM and what latency settings?
Is this board undervoltable? If so, what have you managed, with what CPU?
Has anybody tried running all three RAM slots at DDR400? If so, what RAM and what latency settings?
Is this board undervoltable? If so, what have you managed, with what CPU?