aria 1.0
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
aria 1.0
- CPU : P3-S 1.26 GHZ (stock clocked)
- Mboard : AOpen MX36LE-N
- PSU : external brick + DC/DC converter (look on top)
- Heatsink : Aerocool DP-102
- Fan : NMB 120mm @5V
- HDD : Samsung 120gb (suspended in the 5.25 space)
- TV: PVR350
temps : 45-48°C CPU, 31°C HDD
Insight to version 1.1
- hdd is making a continusous brush sound (kinda of like airflow) : maybe some foam
- altough the fan/airflow noise is really low, I guess it could run passive.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
Any chance you could measure from the surface of the baseplate of the heatsink to the top of the top disc for me? I know the specs say total height is 100mm, but I'm interested in the height minus the last nub of the heatpipe.
My case may be too slim for this heatsink. If I take off the fan shroud and drill a hole just big enough for the central heatpipe, though, it may fit - and transfer some heat to the chassis.
My case may be too slim for this heatsink. If I take off the fan shroud and drill a hole just big enough for the central heatpipe, though, it may fit - and transfer some heat to the chassis.