Will this upgrade increase my heat much?

Got a shopping cart of parts that you want opinions on? Get advice from members on your planned or existing system (or upgrade).

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
frosty
Posts: 636
Joined: Fri Jun 06, 2003 9:40 am
Location: USA

Will this upgrade increase my heat much?

Post by frosty » Fri Oct 01, 2004 12:30 pm

I know this is probably a stupid upgrade, but was looking at going from a:

1700 XP amd to a 2400 XP amd

7500 ATI to an Ultra fanless 9800 PRO ATI – I know the 9800 produces X 4 the heat of the 9600 but I really want it bad for gaming.

and perhaps an upgrade on better ram – I just have cheapo generic in it now. 512.


Or should I just save my money and just overclock the voltage on the board when
gaming and replace the video card?

Any advice, tips or slaps, specially from girls is completely and thankfully welcome.

TIA

jack_aubrey
Posts: 68
Joined: Mon Apr 28, 2003 5:27 pm
Location: USA

XP1700 -> OCed Mobile 2500 or XP 3200?

Post by jack_aubrey » Fri Oct 01, 2004 2:45 pm

I've got a similar question - have been running an ABit NF7-S 2.0 with an Athlon XP 1700 for the last year. I'm thinking about doing a CPU upgrade and don't know whether I'd be better off with an XP 3000/3200 or an OCed Mobile 2500 (just running at the stock 2500 speed doesn't seem like enough of a performance boost to be worth the trouble). I'm using an SLK800U + Panaflo 80L (running through fan control so it's just barely ticking over) for CPU cooling and wouldn't want to upgrade if I have to move to a significantly noisier heat sink solution. I guess the question comes down to whether the Mobile 2500's power consumption will rise anywhere near the 3200's range if clocked to similar speeds?

frosty
Posts: 636
Joined: Fri Jun 06, 2003 9:40 am
Location: USA

Post by frosty » Fri Oct 01, 2004 2:51 pm

Welcome aboard Jack, Your 80 L cfg seems ultra close to mine except the fanmate, can you post any temps?

jack_aubrey
Posts: 68
Joined: Mon Apr 28, 2003 5:27 pm
Location: USA

Post by jack_aubrey » Fri Oct 01, 2004 2:55 pm

frosty wrote:Welcome aboard Jack, Your 80 L cfg seems ultra close to mine except the fanmate, can you post any temps?
I've been aboard for a while, just don't post much. Unfortunately I've had configuration trouble getting the I2C tools running - this is a pure Linux box and it takes a bit more sweat than the Windows users have - and cannot post CPU temps as a result.

FWIW it's been running over a year and is perfectly stable even when heavily loaded. In the summer months I crank the fan voltage up a bit on general principle, but nowhere close to maxed out.

Dobby
Posts: 59
Joined: Thu Jun 03, 2004 10:33 am
Location: Finland

Re: XP1700 -> OCed Mobile 2500 or XP 3200?

Post by Dobby » Fri Oct 01, 2004 9:10 pm

jack_aubrey wrote:I've got a similar question - have been running an ABit NF7-S 2.0 with an Athlon XP 1700 for the last year. I'm thinking about doing a CPU upgrade and don't know whether I'd be better off with an XP 3000/3200 or an OCed Mobile 2500 (just running at the stock 2500 speed doesn't seem like enough of a performance boost to be worth the trouble). I'm using an SLK800U + Panaflo 80L (running through fan control so it's just barely ticking over) for CPU cooling and wouldn't want to upgrade if I have to move to a significantly noisier heat sink solution. I guess the question comes down to whether the Mobile 2500's power consumption will rise anywhere near the 3200's range if clocked to similar speeds?
I'd go with mobile 2500. It's not all about clock speed, you will get substantial speed increase by running fsb at 200 MHz and with increased cache size. Also if you can keep vcore at 1.5 or below, I don't think you will run into heat problems.

simms
Posts: 41
Joined: Tue Aug 24, 2004 12:16 pm

Post by simms » Sat Oct 02, 2004 4:47 pm

Mobile for SURE. The heat output by the Mobile is less than the XP's themselves, and they are multiplier unlocked for your OC'ing pleasure.

frosty
Posts: 636
Joined: Fri Jun 06, 2003 9:40 am
Location: USA

Post by frosty » Mon Oct 04, 2004 6:39 am

Thanks a mill! Will check out the mobile 2500 asap. :)

Post Reply