Well, I had a asrock whatever motherboard but the fdc controller died. I rma'ed it back to newegg; the mobo is no longer carried so i got a new board. Its an Epox 8RDA3+ (NF2 Ultra); and ofcourse, being the dumbass I am... i trusted Zalman's webpage about compatibility and bought it even though the cpu looked wayy to close to the top of the motherboard...
ANYWAY; I have an Evercase 4252 and now my zalman 7000alcu A doesnt fit. I am f'in pissed...
What HSF setup do you guys reccomend? do you have any good links for the thermalrights? cause their pretty damn expensive at newegg...
Screwed; need new HSF or swap Mobo?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Now that I find surprising. Yes the socket is a bit too much up but not really out of the ordinary for most nForce2 Ultra boards in general. The Evercase isn't really a small case either. You shouldn't be having any problems other than the 7000 clip interference.
I've used the 7000 with a 8RDA+ (which has almost the exact socket area layout as the 8RDA3+ and is just as close to the top as yours) inside a much more cramped Sonata.
You're not talking about the clip interference problem are you?
I've used the 7000 with a 8RDA+ (which has almost the exact socket area layout as the 8RDA3+ and is just as close to the top as yours) inside a much more cramped Sonata.
You're not talking about the clip interference problem are you?
Okay, after a little inspiration from burcakb; i pulled the little fan off the northbridge cooler and now it looks like it fits so this is awesome. I need to cut my clip though, DAMN CAPACITOR. Man If i knew it would have fit i would have bought the damn asus. This is SHITTY; Thats what i get for not asking around first, LOL.
Although I'm p**ssed off at Epox, the 8RDA+ and 8RDA3+ are actually very decent boards that can do good overclocking and nice undervolting. In that respect, it's a better board than the Asus.
The clip problem is documented on Zalman's page. Plus it's no really big deal to cut it off.
This being a silentPC site, you didn't need the NB fan anyway
If the stock NB fan is unable to cool properly, you can always install a Zalman NB47 there. You'll need to cut two fins slightly but a regular scissors will do it easily.
The clip problem is documented on Zalman's page. Plus it's no really big deal to cut it off.
This being a silentPC site, you didn't need the NB fan anyway
If the stock NB fan is unable to cool properly, you can always install a Zalman NB47 there. You'll need to cut two fins slightly but a regular scissors will do it easily.