which power supply is better/quieter? 80mm or 120mm fortron

PSUs: The source of DC power for all components in the PC & often a big noise source.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar

Post Reply
batman5177
Posts: 10
Joined: Mon Apr 28, 2003 5:43 pm

which power supply is better/quieter? 80mm or 120mm fortron

Post by batman5177 » Mon Apr 28, 2003 5:50 pm

hi everyone, i'm looking to buy a quiet power supply to replace my 250w antec. which one is quieter?

i've heard a lot of good things about that fortron with the 120mm fan. it's $32 at newegg for the 300w version (FSP300-60PN).

the fortron 300w 80mm fan version is $31 at newegg (FSP300-60ATV).

i think 300w is enough, since the 250w antec runs my machine ([email protected]) perfectly stable.

since they are about the same price, which one is quieter? and will they be a lot quieter than my antec?

any thoughts are appreciated. thanks!

batman5177
Posts: 10
Joined: Mon Apr 28, 2003 5:43 pm

Post by batman5177 » Mon Apr 28, 2003 6:01 pm

they both have noisekiller. has anyone had experience with both of them?

Will35
Posts: 77
Joined: Thu Mar 06, 2003 2:42 pm
Location: Eugene, OR US

Post by Will35 » Mon Apr 28, 2003 6:06 pm

I'll add my two cents as well.... I was able to get rid of the rear case fan as a result of the rather large amount of air that the FSP350-60PN moves. PC has been folding for 4 days 24-7 and the CPU is 46c and MB 38c. The Fortron is noticeably quieter than the Antec Truepower 380s that it replaced.
Last edited by Will35 on Mon Apr 28, 2003 7:03 pm, edited 1 time in total.

aphonos
*Lifetime Patron*
Posts: 954
Joined: Thu Jan 30, 2003 1:28 pm
Location: Tennessee, USA

Post by aphonos » Mon Apr 28, 2003 6:26 pm

You may want to search the forums on "Fortron." Katana Man is a big fan of the 120mm Fortron, but others have found them to be too loud for their preferences.

batman5177
Posts: 10
Joined: Mon Apr 28, 2003 5:43 pm

Post by batman5177 » Mon Apr 28, 2003 6:41 pm

i've read that some people here think the 120mm one is quiet, and some people think it's loud.

there's also a user review a newegg that says it's loud, but others there say it's quiet. very mixed reviews all over...

anyone have experience with the 80mm one?

i'm concerned with the air turbulence noise that the 120mm fan will make.
is it negligible since it's embedded inside the case?

limee
Posts: 126
Joined: Fri Mar 28, 2003 7:12 pm
Location: Ontario, Canada

Post by limee » Mon Apr 28, 2003 7:04 pm

Also depends somewhat of the temperature inside your system. Katanaman had a good airflow design so that might of helped the fortron decide how much air to push. :roll:

batman5177
Posts: 10
Joined: Mon Apr 28, 2003 5:43 pm

Post by batman5177 » Tue Apr 29, 2003 5:31 pm

hi, i think i'm going to go with the 80mm one. thanks everyone for your input!

i have a another quick question:

fortron makes 2 300W psu's, specifically the FSP300-60ATV and the FSP300-60ATV(PF). what does the PF mean at the end, and which is the quiet one that everyone is raving about?

thanks in advance!

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Tue Apr 29, 2003 5:59 pm

PF = Power Factor. The label should actually read PFC = Power Factor Correction, because Power Factor is a parameter like power output. It basically tells you how much AC electricity is wasted by the PSU. Perfect PF is 1.0. Active PFC gives you better than 0.95. Typical PSUs that have no PF correction have a PF of 0.5-0.6, which means 50-40% of AC is wasted as "harmonics". In short, PFC does not help your PC performance, but it IS better for your electric bill (usually) and better for the environment.

aristide1
*Lifetime Patron*
Posts: 4284
Joined: Fri Apr 04, 2003 6:21 pm
Location: Undisclosed but sober in US

Post by aristide1 » Tue Apr 29, 2003 8:30 pm

I wouldn't be surprised if the people who think there are quiet have very light loads and the people who think it's loud have it totally loaded down, or perhaps have small cases with much warmer are inside.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Tue Apr 29, 2003 9:51 pm

Check the PSU to see if it has the noise killer sticker if you're going to buy the generic Fortron stuff, lots of shady businesses out there carrying Fortrons unfortunately.
:?: :?: Please explain. WHat have you seen/experienced?
Last edited by MikeC on Tue Apr 29, 2003 10:32 pm, edited 1 time in total.

batman5177
Posts: 10
Joined: Mon Apr 28, 2003 5:43 pm

Post by batman5177 » Tue Apr 29, 2003 10:07 pm

i ordered the fortron fsp300-60atv from newegg!

i'll post my results in a few days!

Post Reply