It is currently Wed Oct 01, 2014 3:42 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 440 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 15  Next
Author Message
 Post subject:
PostPosted: Thu Apr 28, 2005 12:30 pm 
Offline

Joined: Sat Jan 08, 2005 3:31 pm
Posts: 313
Location: Acton, MA, USA -- Folding for SPCR
I might as well post my HDD suspension here as well:

Image

Believe me, those SP1614Cs are absolutely silent! They are pretty quiet when hooked up too. :wink:

The frame is made out of 1/2-inch MDF, the supports are 1/8-inch bungee cord (nylon covered elastic) as loose as I could make it and still hold securely.

The next time I open up my machine, I will flip the bottom drive upside down so its hot side gets better airflow. As it stands, the bottom drive is running about 5C hotter than the top, even though it is only really used for nightly backups and is otherwise idle. The front grill has been removed since this picture was taken.

The suspension does a nice job with these drives that otherwise vibrate a fair bit. I cannot hear the drives seek at all outside of the case.

_________________
Lee

QX6700 at 3.0GHz, Ninja SCNJ-1100P, 8800GT, Asus P5K-E, Seasonic S12II-500GB, 2x WD5000AACS, Antec Solo
Opteron 170 at 260x10 w/7000B-Cu, 6800 GT w/VF700-Cu, DFI nF4 Ultra-D w/NB47J, Seasonic S12-500, 2x WD5000AACS suspended, Antec SLK3000B


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 30, 2005 6:21 pm 
Offline

Joined: Mon Dec 20, 2004 3:16 pm
Posts: 91
Location: Florida, US
Image
Image
Image
Compusa hard drive heatsinks with rubber pads relocated to the bottom of drives sitting on child's play mat. Bluefront is right those heatsinks smell horrid.

_________________
Image


Last edited by york on Mon May 02, 2005 7:55 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 30, 2005 8:25 pm 
Offline

Joined: Thu Nov 25, 2004 8:57 am
Posts: 228
Location: West Michigan, USA
your pic is broken

edit... got 'er, thanks

_________________
Antec 3700BQE | Seasonic S12-330 | Intel E4300 at 1.14v at 2.4 ghz with passive Scythe Ninja | Kingston 2 x 1 gb PC3200 | ATI X1950Pro AGP 512 mb with Thermalright HR-03A | WD 120 gb HD in homemade enclosure


Last edited by Badger on Sun May 01, 2005 11:59 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sun May 01, 2005 2:39 am 
Offline

Joined: Fri Jan 07, 2005 7:13 pm
Posts: 968
Location: Bristol, UK
It doesn't allow direct linking, so open up the image directly (FF, right click and select 'view image'... IE, copy shortcut and paste into address bar). Would be nice to get an overhead view of those HDDs but looks interesting all the same :)

_________________
It's coming back


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 04, 2005 12:03 pm 
Offline

Joined: Sat Apr 16, 2005 2:20 am
Posts: 7
Location: Warsaw, Poland
Image
Image
Image
It's my suspension, since a few hours. Hard work, I don't think it get so much time to buid this. Based on EndoSteel's project and some elastic suspension. Now I know that success depend on good project and even better tools :)


Last edited by Stefan on Sun May 08, 2005 11:58 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed May 04, 2005 1:09 pm 
Offline

Joined: Sun Mar 14, 2004 11:32 am
Posts: 72
Ewwwww...... its an IBM Deathstar


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 04, 2005 1:14 pm 
Offline

Joined: Sat Apr 16, 2005 2:20 am
Posts: 7
Location: Warsaw, Poland
Yes :) I use it for test only. My suspension should be checked first before I put there my primary disk.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 05, 2005 11:20 pm 
Offline

Joined: Thu Feb 17, 2005 1:26 pm
Posts: 51
Location: Toronto, Canada
Woah, that's awesome.

I want one! :lol:

_________________
A64 3000+ Winchester / 1024MB RAM
SLK3000B / Zalman CNPS 7000B-AlCu ~3V / No case fans / Seasonic S12-380 / Suspended 160GB Nidec / Passive Radeon 9250 Video / Silent


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 30, 2005 2:54 am 
Offline

Joined: Wed May 18, 2005 10:49 pm
Posts: 37
Location: Southampton, UK
l can't remember whether l've posted my pics before so appologies if you've seen them before. The first picture was my attempt at HD suspension (yes l know they're rubber bands :) ) but l've now changed to the 2nd method where the HD is resting on sponge.

l'm still using the same heatsink but, as you can see, l've added some holes in an effort to help air circulation. l don't know whether it's made much difference but it looks pretty.

The 80mm intake fan has since been replaced with an Akasa 120mm item that's running at around 750rpm.

http://i4.photobucket.com/albums/y113/s ... CF0004.jpg

http://i4.photobucket.com/albums/y113/s ... CF0001.jpg


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 30, 2005 4:12 am 
Offline

Joined: Thu Mar 17, 2005 11:23 am
Posts: 39
Stefan wrote:
Image

It's my suspension, since a few hours. Hard work, I don't think it get so much time to buid this. Based on EndoSteel's project and some elastic suspension. Now I know that success depend on good project and even better tools :)

Very ingenious!
I like the way you did it: very clean and doesn't block airflow at all.


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 30, 2005 5:55 am 
Offline
Friend of SPCR

Joined: Sun Dec 05, 2004 11:34 pm
Posts: 889
Location: Finland -- Folding For SPCR
Hi,

I managed to get hold of some GelMec silicone sheet. I cut some small pieces out of it and placed four of them between the HDD and the Sonata HDD cage/bay. I then secured it with some elastic band, that pushes the HDD to the silicone pieces.

ImageImage

It seems to be working similarly to suspension with my Western Digital (AAM enabled), the HDD vibrates, but I cannot feel any vibration transmitting to the Sonata's HDD bay. :)

_________________
Just because I didn't respond to your post doesn't mean you were right. It just means I was speechless as to how to reply to such an idiotic statement

[MainRig][HTPC][Playground]


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 30, 2005 6:05 am 
Offline

Joined: Wed Apr 28, 2004 5:16 am
Posts: 777
Location: canberra, australia
i've done so many wildly different suspension jobs but i didn't take pictures of most of them.. here's a big one from a while ago, 6 spots. when you have multiple drives the noise builds up, this machine is workhorse not allowed in the same room as me. it's a mishmash of old pieces, i bolted a huge AT drive bay into the bones of an ATX case

Image Image Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 30, 2005 7:31 am 
Offline

Joined: Sat Apr 16, 2005 3:51 am
Posts: 290
Location: UK
Thats crazy!

Still got to get some elastic to suspend mine in my new case.

I'll try the normal tie it to floppy cage and hang it off but if that doesn't work the wooden/metal home made cages look nice


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 04, 2005 3:03 am 
Offline

Joined: Tue Jun 03, 2003 12:57 am
Posts: 338
EDIT:Working picture now...

Image

_________________
Antec Solo II
i7-2600S, GA-Z68XP-UD3, 16GB DDR3-1600, HD7750 CF


Last edited by Techno Pride on Sun Mar 11, 2007 2:27 am, edited 2 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 10, 2005 2:36 am 
Offline

Joined: Tue May 31, 2005 12:15 am
Posts: 114
Location: New Zealand
josephclemente wrote:

That is actually my system. :)

I have since created a Stretch Magic suspension using a one-piece 3.5" to 5 1/4" drive adapter. Now I can remove the drive without messing with the suspension.


hey josephclemente, i am going to rig up a Stretch Magic much like yours. Its one of the best looking ive found for my LianLi (with a window). Looks and quiet...very hard !!!

I was wondering if you could post pics of your new system for us all to copy... =)

_________________
thanks,
madd02


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 10, 2005 4:05 am 
Offline

Joined: Fri Jan 07, 2005 7:13 pm
Posts: 968
Location: Bristol, UK
I replaced the original rubber grommets with Sorbothane:

Image Image Image

Requires sorbothane, scissors / round pipe i.d. 12mm (depending on if you want octagonal or round grommets ;)), round pipe o.d. 5-6mm, longer M3 screws depending on thickness of sorbothane. The screws are tight enough that it squishes slightly.

Touching the screws I can feel the vibration, but none is transmitted to the tray. And I don't have to worry about tension or turning the case up on end :)

_________________
It's coming back


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 16, 2005 5:15 pm 
Offline

Joined: Wed May 12, 2004 7:36 am
Posts: 26
Location: Tallahassee, FL
Image

Image

Image


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 24, 2005 3:13 am 
Offline

Joined: Wed Apr 13, 2005 1:29 pm
Posts: 298
Location: Club Tropicana
anymore people with suspension? :)


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 24, 2005 5:23 am 
Offline

Joined: Tue Mar 23, 2004 5:27 am
Posts: 86
Location: Denmark
will try to borrow a digicam and take some pics...

_________________
Main Sys: 3000+ w. Zalman 9500 (nexus fan), Ati 9700 Pro w. Zalman Heatpipe, Thermaltake Tsunami Dream w. AcoustiPack Deluxe & Nexus 120mm


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 26, 2005 12:40 am 
Offline

Joined: Tue Jul 26, 2005 12:37 am
Posts: 11
Location: Sweden
you guys, i hope you realise that by turning a HDD upside down, you prolly will break it in 6 months.

They are disigned to be standing (kabels down), on the side (kabels on the lft or right) or normal (circuits down), but upside down and other strange angels put the Drive suspension (motor etc) in serious train as they are not designed that way.

I have a couple drives breaking cuz some bright head on DELL placed the drives upside down in the chassy, just so it looked better.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 26, 2005 1:31 am 
Offline

Joined: Fri Dec 03, 2004 12:38 pm
Posts: 296
Location: France, Europe Folding for SPCR
jmkhenka wrote:
you guys, i hope you realise that by turning a HDD upside down, you prolly will break it in 6 months.

They are disigned to be standing (kabels down), on the side (kabels on the lft or right) or normal (circuits down), but upside down and other strange angels put the Drive suspension (motor etc) in serious train as they are not designed that way.

I have a couple drives breaking cuz some bright head on DELL placed the drives upside down in the chassy, just so it looked better.

Welcome to SPCR, jmkhenka!

This issue has been discussed at length, and resolved, I believe. Hard drive manufacturers actually do specify upside-down mounting as one correct way to install a harddrive, as well as vertical mounting in any orientation. There was some confusion as to whether mounting at an angle could be harmful, but I think the final consensus was that that could not possibly be harmful, either. See the full (lengthy, and at points quite technical) discussion here.

_________________
ImageSilent rig: muffled Sonata; relocated Seasonic-SuperTornado; ducted 7000A


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 15, 2005 12:27 pm 
Offline

Joined: Wed Jun 29, 2005 7:00 am
Posts: 30
Location: Toluca, Mexico
Drive suspension:
I really wanted to suspend my hard disk but it is enclosed in a cooledrive 3 so it took me a lot of effort to find
the best way to do it. So I figured out that a PSU is a little bit wider than a 5 ¼ so y used the case of an old one.

Image

I had to mod the case to make room for the drive and a 120 mm fan, I cut the hard drive mounting and leaved
just enough of it to let me install a 3 ½ card reader unit, then I put some foam in the case to let rest the PSU case.

Here is the drive on its place.

Image


Last edited by agus_c_o on Thu Nov 10, 2005 10:26 am, edited 5 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 16, 2005 1:41 pm 
Offline

Joined: Tue Feb 08, 2005 12:01 am
Posts: 20
Location: Wroclaw, Poland
Hi guys,

how do you remove that piece of metal at the bottom of the SLK3000B that the drive cage is clung onto? (The one near the front)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 17, 2005 6:14 am 
Offline
SPCR Reviewer

Joined: Sat Nov 23, 2002 6:33 am
Posts: 8636
Location: Sunny SoCal
Reterminator wrote:
Hi guys,

how do you remove that piece of metal at the bottom of the SLK3000B that the drive cage is clung onto? (The one near the front)


Drill out the rivets that hold it in place.

_________________
Main Box: Intel i3-3225, Intel DH77EB, 16GB Corsair RAM, 256GB Samsung 830, SS360GP PSU, CM PS07 case.
Music Server: Intel DH77EB + i3-3220, 2xSamsung 2TB F4, Pico PSU, Fractal Define Mini, 2xScythe Fans @250 rpm.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 18, 2005 2:19 pm 
Offline

Joined: Sun Aug 14, 2005 3:21 pm
Posts: 133
Location: Belgium
I'm going to mod my sonata and 3700BQE, and a suspension mod for my 4 HDs
is one of the things I'm going to do.
But what to choose.
I found on this forum 3 ideas..
1) Ralphs polyurethane ultrasoft adhesive mod (sorbothane)

2) Techno Pride's cheap elastic suspension

3) Fluxu8 elastic suspension

First I have no idea where to get the sorbothane over here (belgium).
I searched with google.be but I don't really know what to search
for, I tried 'polyurethaan zelfklevend' but only got a factory without shop..
I guess my googling ain't that great. :D

So the elastic suspensions are a solution, but I noticed (on the pics above)
that some suspended HDs are blocking the holes in the drive tray, and so blocking the airflow completely. Am I right or wrong in this conclusion?
Maybe adding extra holes in the cage can be an option?

Some help would be great.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 25, 2005 5:49 am 
Offline

Joined: Mon May 09, 2005 4:06 pm
Posts: 47
They look pretty bodgy - but the bungee cord works well... Some of those little gold goloured clips with the nails removed and replaced with screws does the trick =)

http://img393.imageshack.us/my.php?image=hdd4zl.jpg


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 15, 2005 4:42 am 
Offline

Joined: Thu Sep 15, 2005 4:39 am
Posts: 22
Case top (with optical drives removed):
Image
Image

Case bottom:
Image
Image

:)

The box is pretty much inaudiable, just a <14db fan at the back running at 15% and a <14db psu fan running at around 40%, ca't be heard from 12" away (apart from when the hdd's are busy, then you hear a very light clicking)

They've been running like this for well over a year now with no problems


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 02, 2005 3:57 pm 
Offline

Joined: Tue Oct 21, 2003 7:48 am
Posts: 70
Location: hbg, sweden
Image

Put a tv-card and a raptor and a samsung 250 in - starting to get cramped now

_________________
antec solo, abit ip35pro xe, intel q6600, noctua nh-u12p, corsair vx550, ati hd4870 1gb, wd velociraptor 150gb x2 raid0, samsung f1 750gb x2 raid 1


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 02, 2005 8:50 pm 
Offline

Joined: Sat Oct 01, 2005 9:08 pm
Posts: 424
Location: Somewhere over the rainbow....
Image
sry for the quality, my old LEGO cam :)
similar to stretch magic, but it's....(drumroll) glow in the dark string :lol:
was lying around and slighty stretchy so what the heck

still can hear seeks, but not as bad as before *shudder*
yes i'm new, but not a total noob 8)

EDIT-sometime i put my old P4 heatsink on it to cool, since currently i have no exhaust fan, (if u look closely on the left, my good ol' legos :D holding a stock 120mm fan at 5v cooling my once noisy ati9800. I can switch back to 12v for gaming curtousy of mike's DDPT switch)


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 03, 2005 3:27 am 
Offline

Joined: Thu Sep 15, 2005 4:39 am
Posts: 22
It seems like I'm the only one who has a ground connection running from the drives to the chassis. Don't any of you guys bother about the static buildup on the drive from the constant high speed spinning?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 440 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 15  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group