SPCR featured in local Vancouver paper
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
SPCR featured in local Vancouver paper
A while ago, someone suggested contacting the tech columnist at a local paper to see if he'd write up something about SPCR, maybe help drive more traffic to the site. So I did, an interview ensued, and here's the result: http://www.straight.com/editorial/tech.php About the paper: "Established as the lifestyle and entertainment weekly in Vancouver for over 30 years, the Georgia Straight is an integral part of the active urban West Coast lifestyle with a per issue readership in excess of 369,000."
BTW, that UBC anechoic chamber student project mentioned in the article IS happening. I have the role of an "industry consultant" (or some such thing) for 3 final-year mech eng students who will be examining fans (noise / airflow / vibes @ various voltages) in a very serious way under my guidance -- along with their mech eng prof, of course. I've doggedly pursued this one for almost a year. Finally!
BTW, that UBC anechoic chamber student project mentioned in the article IS happening. I have the role of an "industry consultant" (or some such thing) for 3 final-year mech eng students who will be examining fans (noise / airflow / vibes @ various voltages) in a very serious way under my guidance -- along with their mech eng prof, of course. I've doggedly pursued this one for almost a year. Finally!
Last edited by MikeC on Thu Oct 17, 2002 10:21 pm, edited 1 time in total.
-
- Posts: 16
- Joined: Thu Oct 17, 2002 7:25 pm
- Location: OC, California. Just OC. No preceding articles.
That's a great article. I hope more people start realizing how ridiculous some of these computers have gotten. And I alo wanted to say thank you for all the work you've putinto this site. The information within and the inspiration derived thereon have been really helpful to the planning of my next upgrade, and you can be sure that I'll share my work on it here (well, once the nForce2 microATX boards start shipping, anyway ). Keep up the good work, MikeC!
-
- Patron of SPCR
- Posts: 429
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: San Francisco, CA
- Contact:
Very interesting read!
especially as I've followed this site since its birth and a fellow quiet enthusiast, I really appreciate the great work Mike has put into the site. I've learned a lot from this site and his advice.
-Ken
-Ken
-
- Posts: 262
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Worcester, UK
Last night I was out for dinner with a friend whom I hadn't seen in months, and she suggested that I pick up the Georgia Straight since it had an article about computer noise, and she remembered that I have an interest in noise control.
This morning I picked up the Straight, read the article, and was reminded of a project I did two years ago at UBC, under Dr Hodgson's guidance. At the time I had an AMD 450 MHz-powered computer, and I felt it was too loud, so I set up my own project. It was only a single-term project, so I didn't have the time to try many things, but I came out with an enclosure with baffles to silence the incoming and exhaust air-- it worked quite nicely in the anechoic chamber. I've probably still got my report hanging around somewhere, in case it's of any interest.
Regards,
-Melchior
This morning I picked up the Straight, read the article, and was reminded of a project I did two years ago at UBC, under Dr Hodgson's guidance. At the time I had an AMD 450 MHz-powered computer, and I felt it was too loud, so I set up my own project. It was only a single-term project, so I didn't have the time to try many things, but I came out with an enclosure with baffles to silence the incoming and exhaust air-- it worked quite nicely in the anechoic chamber. I've probably still got my report hanging around somewhere, in case it's of any interest.
Regards,
-Melchior
I managed to find my report on an old backup CDROM. I tossed it on my website and I've thrown together a quickie webpage for it:
http://mtrs.org/MTRS/noisecontrol.html
http://mtrs.org/MTRS/noisecontrol.html