So the question is how many USB peripherals have you got connected?
I just thought id ask because i just noticed i have quite a bit of them adding to th cable spaghetti behind the computer..

I have eight that are connected all the time, two of these are on a additional bracket in a PCI slot.

Edit: Ok since everyone else seems to list specifically what they have connected ill do it too..

printer, Canon iP4000
scanner, Canon CanoScan 4200F
mouse, Logitech MX518
keyboard, Microsoft Wireless Comfort Edition
USB HDD, Lacie 250Gb design by F.A. Porsche(Seagate ST3250832A inside apparently)
memory-card reader, Media Lounge 23 in 1
bluetooth dongle, Epox
USB cable to my phone, Sony Ericsson k750i

currently 2...

1) keyboard
2) mouse

soon to come...

3) irda
4) bluetooth
5) gamepad
6) printer

Two at the back...

Keyboard - PS/2 mouse plugs into keyboard
Scanner

I use the front two for one of:
Gamepad
MP3 player
Card reader

My parallel printer is still going strong!

I havent even bothered installing the front ports, simply because my case came with separate connectors for each fooking wire...



Your what?

Keyboard/mouse. Legacy is stoopid, USB all the way.

Keyboard
Mouse
2 Gamepads
Webcam
Scanner
Laser printer
Inkjet printer
External HD
IRDA

2 Hubs (Does these count?)

MP3 player occasionaly

Yes hubs are accepted into this highly bla bla bla survey. how else could you connect 10+ devices? My DFI mobo has ten usb ports, six on the back. not seen a mobo with mroe than ten ports yet.

Just three:

Mouse
Printer
Webcam

Okay long list:
1. Razer Diamondback Copperhead Laser Moue
2. Microsoft Natural Ergonomic Keyboard 4000
3. Logitech Orbit Video Camera
4. HP Deskjet 895Cxi (OLD printer)
5. Belkin 7 port Economy USB HUB with 2 top loading ports
6. Iomega Portable Mini HDD 60 GB using 1.8" possibly Hitachi EK100 60 GB HDD
7. OCZ Rally 1 GB Flash DRive
8. Connector for Sony DSCP100 Digital Camera
9. Connector for iRiver iFP899 1 GB MP3 Flash Player
10. SmartDisk FireLite 80 GB USB HDD (Fastest USB 2.0 HDD I've ever tested - 30 MB/sec!)
11. Griffin Technologies PowerMate USB Controller

I need to buy a new hub, speaking of which....

Just call me Mr. USB Fetish.

Logitech Cordless Click mouse
iPod
Cable for my 6680
Cable for camera

[ printer is connected by ethernet, keyboard by ps2 ]

I'm the none

Actually have a camera, webcam, scanner, phone charger, 2*phone data, 2.5" HDD, pen drive that all plug in if essential. But I don't trust USB:

- swapped my mouse back to PS/2 using an adapter (as on USB port it wasn't waking up the OS on one of the mobos I've had)
- swapped the printer to direct LAN connect
- swapped the ADSL to a LAN/router/modem

The last straw: a downloaded DVD ISO failled md5sum when copied to Linux from 2.5" hdd via USB. Also failed checksum when I copied the same file into Windows from the 2.5" via USB (different checksum though!) Also gave the wrong checksum when I checksummed the file directly on the 2.5" HDD via USB, whether from Linux or Windows. But gave no error when I mounted the 2.5" onto an IDE cable.

Just a mouse and gamepad.

My printer's parrallel.
My keyboard's PS2.
My soundcard's onboard.
My joystick's a gameport one.
My 2 hard drives and DVD drive are internal(IDE).

I'm sooooo pathetically obsollete.

My permanently attached USB thingy:

1. Keyboard
2. Mouse
3. External Hdd (power off most of the time)
4. T-balancer

Occasional attached USB devices (mostly through front port):

1. Printer/scanner
2. Card reader
3. Digital camera
4. whatever..

Currently plugged:

• Asus webcam
• Logitech diNovo (keyboard/mouse combo)
• Canon i550 printer

Other USB stuff not connected right now:

• Cruzer mini 512MB
• Sony external floppy drive
• External Western Digital 40GB in a USB enclosure
• Sidewinder Precision 2 joystick (rarely used)
• Sidewinder Gamepad Pro (never used)

I also have a Microsoft optical mouse for my laptop, I hate those touchpads...

Mouse
wireless adapter
sometimes a camera but just long enough for the transfer

**Legacy's 'da bomb!!**

External:

Printer

DAC

Internal:

X-in-1 meadia reader

HDtach says my Lacie is 33MB/s average read.

@work:

Logitech Trackman Wheel
RS-485 converter


@home (spread over all systems):

8-in-1 drive thingy
scanner
printer (Canon iP4000R which is also on LAN and WLAN)
iPod lead (for when the iPod isn't in the car)
iMon (inside HTPC)
bluetooth dongle
spare USB lead for my external drive when it gets plugged in

Currently using:

Mouse
External Back Up HDD


Occasional:

Scanner
PDA
Camera
Pen Drive

Very Occasional:

Steering Wheel
Joystick

Possible:
Keyboard (Can't remember if it's PS2 or USB and too lazy to get on my hands and knees.. )



Pete

Currently, mouse and pen tablet. In a few weeks there will also be a printer and a scanner plugged in.

No one nearby sells them here ;P which one do u have? any idwa what HDD it uses?

I edited the original post with more details, but anyway according to HDtach its a 250Gb Seagate ST3250832A. Its the Design by F.A. Porsche line. Lacie claimes maximum sustained data transfer as 34Mb/s and it seems to be correct datasheet

Its not quiet enough to have on 24/7 but not disturbingly loud either, its mostly a hum and some vibration wich the rubber feet isolate from the table pretty well. The aluminium enclosure gets warm so it seems the heat is transferred pretty well from the hdd.

OH. So it's a 3.5" drive then. See all mine are 2.5's.

1. Keyboard
2. Mouse
3. Printer
4. HDD
5. Memory reader
6. Cell phone

Zero.