, very good guide and also good advice on how to pop out the molex pins as well, but personally instead of crimping the wires I'd heatshrink and solder them together, worth the extra time and effort 7 Volt connector building guide
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
7 Volt connector building guide
http://www.overclockershideout.com/7voltmod.shtml I remembered that one of u guy's wanted that pictorial guide to modding a 7V connector using the molex plugs, I managed to run into it , very good guide and also good advice on how to pop out the molex pins as well, but personally instead of crimping the wires I'd heatshrink and solder them together, worth the extra time and effort
, very good guide and also good advice on how to pop out the molex pins as well, but personally instead of crimping the wires I'd heatshrink and solder them together, worth the extra time and effort Much simpler and straight forward approach is here:http://www.dslwebserver.com/main/fr_ind ... apter.html. Shows you how to make a 12V to 7V or 5V molex out of one of your spare molex Y plugs. I use them all the time. Takes me about two minutes now to make one.