An Interview with mCubed

Want to talk about one of the articles in SPCR? Here's the forum for you.
Post Reply
MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

An Interview with mCubed

Post by MikeC » Sun Aug 27, 2006 9:27 pm


jaganath
Posts: 5085
Joined: Tue Sep 20, 2005 6:55 am
Location: UK

Post by jaganath » Mon Aug 28, 2006 12:06 am

Typo patrol:

page 1:
It's also a look at the mentality that leads people to develop solutions for an all too common *******: the noise our computers produce
"problem" should be where the asterisks are.

page 2:
However it [is] also vital to realize that we have never received a single RMA complaint w[h]ere any potential mal-function could not be traced back [to] a wrong installation.
Missing words/letters in brackets.

Good interview, it's nice that SPCR now has an EU correspondent, you have a substantial following here so it makes sense to expand beyond the traditional NA base.

autoboy
Posts: 1008
Joined: Fri Dec 10, 2004 8:10 pm
Location: San Jose, California

Post by autoboy » Mon Aug 28, 2006 7:00 am

Put me down for one of the power bricks. Finally, a brick that can run a HTPC without integrated graphics.

TheEagleCD
Posts: 48
Joined: Wed Jan 08, 2003 1:32 pm
Location: Austria
Contact:

Post by TheEagleCD » Mon Aug 28, 2006 7:22 am

jaganath, thanks a lot for the corrections...

autoboy: yeah, you can power quite a potent (HTPC, gaming, massive storage, whatever) rig with those 210 watts! :)

Cheers,
Christoph

Devonavar
SPCR Reviewer
Posts: 1850
Joined: Sun Sep 21, 2003 11:23 am
Location: Vancouver, BC, Canada

Post by Devonavar » Mon Aug 28, 2006 11:22 am

I like the look of the brick. It looks like it could have been sourced from the film industry. The 4-pin XLR cable it's using to deliver power is standard for a lot of camera gear.

leem
Posts: 144
Joined: Mon Sep 09, 2002 11:59 pm
Location: Melbourne, Oz

Post by leem » Mon Aug 28, 2006 2:14 pm

Good interview Christoph, great to see you've joined the SPCR team!

That power brick looks a useful product, as does this Semi-passive kit for ATX power supplies. I've emailed M-Cubed to get more details.

I hope they do a mini-itx case. But I also hope that they offer products for mini-itx DIY -- I really don't need more than one or two sensors in my mini-itx cases. The T-Balancer products, good though they are, are a bit overkill for me, and render the on-board sensors redundant. Along with the on-board sensors and Speedfan, all I'm really after is a sensor module that can work off the SMBus, something like THIS. Maybe M-Cubed will make one to work with their own sensors and Speedfan.

PS. will reply to your email soon, sorry for delay...!

Longwalker
Posts: 53
Joined: Sun Aug 06, 2006 2:35 pm

Post by Longwalker » Mon Aug 28, 2006 11:08 pm

I wonder why they're not looking at 24v or 48v for external brick supplies. 48 volt AC-DC PSUs tend to be more efficient than their 12v counterparts and the higher voltage makes for thinner cabling.

jaganath
Posts: 5085
Joined: Tue Sep 20, 2005 6:55 am
Location: UK

Post by jaganath » Mon Aug 28, 2006 11:47 pm

Longwalker wrote:I wonder why they're not looking at 24v or 48v for external brick supplies. 48 volt AC-DC PSUs tend to be more efficient than their 12v counterparts and the higher voltage makes for thinner cabling.
Maybe that gain in efficiency is lost when the 48V has to be stepped down to the low voltages required by PC components? Just a guess, and a speculative one at that.

Longwalker
Posts: 53
Joined: Sun Aug 06, 2006 2:35 pm

Post by Longwalker » Tue Aug 29, 2006 11:34 pm

DC-DC conversion is pretty advanced by now. Voltage delta between input and output in stepdown conversion shouldn't make much difference in efficiency.

And really, it's about time internal PC components went to higher voltages anyway. The number of 12v wires necessary for the kind of power modern GPUs and CPUs draw is getting crazy. It's high time for a formfactor change allowing 48v to be used for CPU and GPU power. 4-, 6- and 8 pin 12v connectors are nothing more than a messy kludge.

Aris
Posts: 2299
Joined: Mon Dec 15, 2003 10:29 am
Location: Bellevue, Nebraska
Contact:

Post by Aris » Thu Sep 07, 2006 11:36 am

I'd guess the reason its 12v is because all the 200watt DC/DC converters take a 12v input.

That powerbrick looks a bit excessive for only bing 210watts. Delta produces a 220w passive external brick that isnt nearly as ventalated or use as thick of wires as that unit does. I look at the one from Mcubed and i expect it to do at least 300watts.

Personally, I'd prefer if Mcubed would just get bulk Delta 220w bricks and sell them on the retail channel.

Tibors
Patron of SPCR
Posts: 2674
Joined: Sun Jul 04, 2004 6:07 am
Location: Houten, The Netherlands, Europe

Post by Tibors » Thu Sep 07, 2006 2:40 pm

I don't think that Mcubed brick is a "real" brick. It looks like an industrial 12V powersupply in a nice package.

gb115b
*Lifetime Patron*
Posts: 289
Joined: Tue Jun 13, 2006 12:47 am
Location: London

Post by gb115b » Sat Sep 09, 2006 5:06 am

no-one asked why their t-balancer software is such a pig.... :(

Post Reply