TDP list for Intel chipsets

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

TDP list for Intel chipsets

Post by Mats » Wed Oct 18, 2006 7:41 am

All numbers are maximum TDP taken from Intel.

IOH:

X58: 24.1 W


MCH:
(Note: Idle Power is based on a typical part in system booted to Windows OS with no background applications running.)


X48: 26.5 W, 12.3 W idle, with 333 MHz FSB
P45: 22 W, 9 W idle, with 333 MHz FSB
G45: 24 W, 9 W idle, with 333 MHz FSB
P43: 22 W, 9 W idle, with 333 MHz FSB
G43: 24 W, 9 W idle, with 333 MHz FSB

X38: 26.5 W, 12.3 W idle, with 333 MHz FSB
P35: 16 W, 5.9 W idle, with 333 MHz FSB
G35: 28 W, 11 W idle, with 333 MHz FSB
Q35: 15 W, 6.5 W idle, with 333 MHz FSB
G33: 14.5 W, 5.75 W, with 333 MHz FSB
P31: 15.5 W, 7.6 W idle, with 266 MHz FSB
G31: 15.5 W, 7.4 W idle, with 266 MHz FSB

G965: 28 W, 13 W idle
Q963: 28 W, 13 W idle
Q965: 28 W, 11 W idle
P965: 19 W, 10 W idle

975X: 13.5 W
955X: 13.5 W
945G: 22.2 W
945GZ: 22.2 W
945P: 15.2 W
945PL: 15.2 W

925XE: 13.3 W
925X: 12.3 W
915G: 16.3 W
915GV: 16.3 W
915GL: 16.3 W
910GL: 16.3 W

875P: 10.1 W
865G: 12.9 W
865GV: 12.6 W
865PE: 11.3 W
865P: 10.3 W

845GE: 6.3 W
845PE: 5.6 W

ICH:

ICH10: 4.5 W
ICH9: 4.0 W
ICH8: 4.1 W
ICH7: 3.3 W
ICH6: 3.8 W
ICH5: 2.4 W
ICH4: 2.2 W
Last edited by Mats on Thu Feb 12, 2009 3:49 pm, edited 6 times in total.

pyogenes
Posts: 273
Joined: Wed Oct 11, 2006 10:38 am
Location: Chicago

Re: TDP list for Intel chipsets

Post by pyogenes » Wed Oct 18, 2006 8:07 am

Mats wrote: MCH:

P965: 19 W
975X: 13.5 W

ICH:

ICH8: 4.1 W
ICH7: 3.3 W
I never would have guessed that after reading this:
http://anandtech.com/cpuchipsets/showdoc.aspx?i=2855

Moral of the story: Reality and theory don't always align. ;-)

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Re: TDP list for Intel chipsets

Post by Mats » Wed Oct 18, 2006 8:59 am

pyogenes wrote:Moral of the story: Reality and theory don't always align. ;-)
The "reality" you're talking about is far from perfect to draw any conclusions from. That 975X board have an additional RAID controller which the P965 doesn't have. I'd like to see more mobos tested, but then again, the average 975X mobo have more components than the average P965.

You simply can't draw any useful conclusions between the power draw of P965 and 975X when the biggest difference in the test is 3.8 W. :shock:

BTW the P965 uses 10 W in idle in Windows XP.

b3nbranch
*Lifetime Patron*
Posts: 130
Joined: Wed Aug 09, 2006 6:10 pm
Location: Columbus, Ohio
Contact:

Post by b3nbranch » Wed Oct 18, 2006 11:48 am

If you add a graphics card, thus disabling on-board graphics,
would a G chip drop to the wattage of a P chipset? (e.g. G965->P965,
945G->945P)

autoboy
Posts: 1008
Joined: Fri Dec 10, 2004 8:10 pm
Location: San Jose, California

Post by autoboy » Thu Oct 19, 2006 8:34 am

Looks like the onboard graphics on the 965 chipset will consume a lot of power. I wonder if they can still be cooled passively.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Thu Oct 19, 2006 9:02 am

Mats,

This is really good information. Where exactly did you get the numbers from tho? Did you dig into each and every tech doc for each and every chipset? Or is there some big comparison table? I looked briefly but the latter ones I found did not show power...

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Thu Oct 19, 2006 10:24 am

MikeC wrote:Where exactly did you get the numbers from tho? Did you dig into each and every tech doc for each and every chipset?
Yeah, I had to do it the hard way. :wink: Not that it was hard though, and certainly not one for each chipset. Some docs covers 4 or more chipsets, the doc titles says it all. I think it was 14 documents plus one for each ICH.

The TDP is found in every "Intel® xxx Chipset Family Thermal Mechanical Design Guidelines" doc, under the "Technical Documents" tab for each chipset. It is listed in the table of contents, and is usually found somewhere in pages 10 - 17. Here is the doc for the 965/963 series for instance (page 14).
Last edited by Mats on Wed Aug 15, 2007 10:36 pm, edited 1 time in total.

smilingcrow
*Lifetime Patron*
Posts: 1809
Joined: Sat Apr 24, 2004 1:45 am
Location: At Home

Post by smilingcrow » Thu Oct 19, 2006 10:36 am

28W is a lot to cool passively and if you look at the Asus P5B-VM which uses the G965, it doesn’t have a very large (passive) heatsink on the Northbridge. Not a good board for over-clocking I would surmise.
An extra 9W maximum for an IGP isn’t so much when you consider that an entry level GPU typically consumes 9W or more at idle; G965 has a TDP 9W more than the P965.

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Thu Oct 19, 2006 2:56 pm

The tech docs also shows the power consumption for the 96x series in idle while running Windows XP. I'll add that now.

I think the TDP numbers for the newest chipsets will make people reconsider the choice of mobo, especially for HTPCs.

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Thu Oct 19, 2006 3:15 pm

autoboy wrote:Looks like the onboard graphics on the 965 chipset will consume a lot of power. I wonder if they can still be cooled passively.
My guess is that it's just like with the nVidia 6100 chipsets, it's possible as long as you don't run games for instance.

pyogenes
Posts: 273
Joined: Wed Oct 11, 2006 10:38 am
Location: Chicago

Re: TDP list for Intel chipsets

Post by pyogenes » Thu Oct 19, 2006 4:27 pm

Mats wrote:
pyogenes wrote:Moral of the story: Reality and theory don't always align. ;-)
The "reality" you're talking about is far from perfect to draw any conclusions from. That 975X board have an additional RAID controller which the P965 doesn't have. I'd like to see more mobos tested, but then again, the average 975X mobo have more components than the average P965.

You simply can't draw any useful conclusions between the power draw of P965 and 975X when the biggest difference in the test is 3.8 W. :shock:

BTW the P965 uses 10 W in idle in Windows XP.
I think you misunderstood me (my fault for being facetious in my post rather than elaborating on my line of thought). The intent of my comment is perfectly in alignment with your response - there's too many other factors involved to make an assumption about motherboard based on chipset (or vice versa).

In hindsight, I realize you originally posted the information to give guidance for chipset cooling solutions, not commenting on motherboards as a whole (which is what I was responding about)

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Thu Oct 19, 2006 4:36 pm

pyogenes:Yeah, I realized that after a while. Not surprising, since English isn't my native language. It happens all the time.

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Wed Aug 15, 2007 3:48 pm

Update: G31, G33, G35, P31, P35 and ICH9 added.

mimwdv
Posts: 110
Joined: Mon Dec 27, 2004 3:54 pm
Location: Sydney, Australia

Post by mimwdv » Wed Aug 15, 2007 5:52 pm

Hey, Mats, thanks for a really useful list for those of us trying to build a seriously low-power system. I was planning on replacing my p965 board for something cheaper to run, but maybe I'll hang onto it after all. 10W ain't so bad!

cmthomson
Posts: 1266
Joined: Sun Oct 09, 2005 8:35 am
Location: Pleasanton, CA

Post by cmthomson » Wed Aug 15, 2007 6:28 pm

Of course you need to consider overclocking. Almost all ASUS motherboards overclock the MCH by default (in the BIOS it's called "Hyperpath 3"), so by default the north bridges consume more power than the Intel specs.

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Wed Aug 15, 2007 10:24 pm

Remember that these numbers are more useful when discussing chip cooling rather than estimate mobo power consumption. Two different mobos with the same chipsets can have different power consumption. The power consumption also depends on MCH clock speed (like cmthomson mentioned), choice of components (and additional controllers like RAID), etc.

mimwdv
Posts: 110
Joined: Mon Dec 27, 2004 3:54 pm
Location: Sydney, Australia

Post by mimwdv » Wed Aug 15, 2007 11:00 pm

True, I hadn't thought of that. Does anyone know if turning off options in the BIOS also cuts of power to them? ie if I was to turn of my second SATA controller would it save me any power?

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Thu Aug 16, 2007 8:50 am

mimwdv wrote:Does anyone know if turning off options in the BIOS also cuts of power to them? ie if I was to turn of my second SATA controller would it save me any power?
You have to understand how the mobo works, check this block diagram.
It probably will lower power consumption in the ICH, most likely not in the MCH since it won't transfer any data from the ICH to the CPU for that SATA channel since it's unused.

According to page 11 in this doc, the ICH uses 3.3 W when 4 untis (3 HD's in RAID and 1 optical drive) are connected,
and 3.7 W when 6 units (4 HD's in RAID and 2 optical drive) are connected.
Disabling devices in BIOS may affect boot time though.

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Sun Aug 24, 2008 3:06 am

Update: X38, G43, G45, P43, P45, X48 and ICH10 added.

thejamppa
Posts: 3142
Joined: Mon Feb 26, 2007 9:20 am
Location: Missing in Finnish wilderness, howling to moon with wolf brethren and walking with brother bears
Contact:

Post by thejamppa » Sun Aug 24, 2008 4:27 am

I never knew that P45 would consume 6W's more than P35. I am glad i went for P35 board with downblowing cooler ^^. Excellent job Mats!!

smilingcrow
*Lifetime Patron*
Posts: 1809
Joined: Sat Apr 24, 2004 1:45 am
Location: At Home

Post by smilingcrow » Sun Aug 24, 2008 10:51 am

Intel has a chipset for embedded systems or SFF systems that has a TDP of 2.3W and supports Atom – SCH US15W.
Panasonic has a Toughbook UMPC using the chipset with an Atom Z520 – Toughbook CF-U1 UMPC. 4.3W for the CPU + Chipset is starting to look good.

matt_garman
*Lifetime Patron*
Posts: 541
Joined: Sun Jan 04, 2004 11:35 am
Location: Chicago, Ill., USA
Contact:

Post by matt_garman » Mon Aug 25, 2008 2:20 pm

I did the exact same research, just didn't bother to post it! :)

Anyway, a couple oddball chips to add to the list:

Q35 13.5 W
3210 21.3 W
6702PXH 10.2 W

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Mon Aug 25, 2008 3:10 pm

I was about to add the Q35 and the Q33, but the lower FSB made it a bit confusing, and probably the reason for lower power draw compared to G33.
I will probably add them later on.

Daijoubu
Posts: 11
Joined: Tue Mar 06, 2007 10:31 pm

Post by Daijoubu » Tue Sep 16, 2008 1:29 pm

Please add the 945GSE at 6 watts (+3.3 for the ICH7M)

http://ark.intel.com/chipset.aspx?familyID=35553

Total of 11.8W for the Intel Atom N270 + 945GSE and ICH7M (Acer Aspire One, EEEPC901+/Box, Wind, Wind PC)

QuietOC
Posts: 1407
Joined: Tue Dec 13, 2005 1:08 pm
Location: Michigan
Contact:

Post by QuietOC » Tue Oct 21, 2008 8:40 am

Mats wrote:I was about to add the Q35 and the Q33, but the lower FSB made it a bit confusing, and probably the reason for lower power draw compared to G33.
I will probably add them later on.
Intel's power numbers are meaningless without their notes. The P35 numbers are higher than the G33 because of the power required to run a discrete card PCIe interface. The P35/G33/Q35/Q33 are all the same chip. If you use them the same way, they use the same amount of power. Intel even points this out:
Intel wrote: 5. Max Idle data is measured on 82P35 MCH for Energy Star when an external graphics card is installed in a system wherein this card must support L0s /L1 ASPM.
6. When an external graphics card is installed in a system with the Intel 82G33, 82Q33 or 82Q35, the TDP for these parts will assume the worst possible PCI Express design and consume as much as 82P35 TDG (16.0 W)
So, all the 3-series chips are really 16 W TDP.

I vote no for including numbers from embedded low power chipsets like the 945GSE unless you can get those in retail motherboards. The 945GSE only has a single DDR2 channel and no PCIe x16 to power.

And why the 945GSE when all the other versions of the 945GM have dual channel DDR2 for 1W TDP more?

Mats
Posts: 3044
Joined: Fri Dec 26, 2003 6:54 am
Location: Sweden

Post by Mats » Thu Feb 12, 2009 3:58 pm

Q35 and X58 added.

matt_garman
*Lifetime Patron*
Posts: 541
Joined: Sun Jan 04, 2004 11:35 am
Location: Chicago, Ill., USA
Contact:

Post by matt_garman » Fri Feb 13, 2009 6:21 am

One more that may be of interest: Q45: 17 W Max TDP, Idle (C1/C2): 6 W, Idle (C3/C4): 4.7 W.

I'm confused about the discrepancies between the P, Q, and G series (other than the P not having integrated video).
QuietOC wrote:Intel's power numbers are meaningless without their notes. The P35 numbers are higher than the G33 because of the power required to run a discrete card PCIe interface. The P35/G33/Q35/Q33 are all the same chip. If you use them the same way, they use the same amount of power.
I sort of understand, but not really. :oops:
Mats wrote: P35: 16 W, 5.9 W idle, with 333 MHz FSB
G35: 28 W, 11 W idle, with 333 MHz FSB
Q35: 15 W, 6.5 W idle, with 333 MHz FSB

P45: 22 W, 9 W idle, with 333 MHz FSB
G45: 24 W, 9 W idle, with 333 MHz FSB
Q45: 17 W, 4.7/6W idle
I added the Q45 line. Intuitively, the P series should have lower TDP in general due to lack of video. And looking at the P35 vs G35 case, this is true. Q35 throws it all for a loop though.

Now, why with P45 vs G45 is there no difference in idle TDP? And why did TDP go up from the P35 to P45? My understanding is that there weren't too many features added and there was a process shrink.

Anecdotal information: I believe the Q35 does in fact have fairly low idle power consumption. I built my fileserver using an Intel Q35 board with an E5200. I used my Kill-A-Watt, and let it run for over a week. The machine averaged about 118 W AC. Then I rebuilt it, changing only the motherboard and processor to the Gigabyte GA-MA74GM-S2 motherboard and 4850e. I'm at about five days (not quite a week yet), but I've averaged 117 W AC on this setup. Virtually the same.

Given that SPCR found the GA-MA74GM-S2 to have one of the best idle power draws, I'd say that the Q35+E5200 is practically an equal.

QuietOC
Posts: 1407
Joined: Tue Dec 13, 2005 1:08 pm
Location: Michigan
Contact:

Post by QuietOC » Fri Feb 13, 2009 7:22 am

matt_garman wrote:I'm confused about the discrepancies between the P, Q, and G series (other than the P not having integrated video).

I sort of understand, but not really. :oops:
The integrated video circuits are still present in the P versions and still use current. Adding a external PCIe video card additionally loads the Northbridge. So, the TDP is actually higher for the G33/P35 with a video card than when using the IGP. G35 is not the same chip as G33/P35, it is more like the G45 which is a much more complicated IGP than the GMA 3100 in the G33/P35.

P45=G45 sort of a die shrunk G35
P35=G33=Q33=Q35 (=G31/P31?)

matt_garman
*Lifetime Patron*
Posts: 541
Joined: Sun Jan 04, 2004 11:35 am
Location: Chicago, Ill., USA
Contact:

Post by matt_garman » Fri Feb 13, 2009 9:18 am

QuietOC wrote:The integrated video circuits are still present in the P versions and still use current. Adding a external PCIe video card additionally loads the Northbridge. So, the TDP is actually higher for the G33/P35 with a video card than when using the IGP. G35 is not the same chip as G33/P35, it is more like the G45 which is a much more complicated IGP than the GMA 3100 in the G33/P35.
Why don't they disable the IGP circuits in the P-series chips?
QuietOC wrote:P45=G45 sort of a die shrunk G35
P35=G33=Q33=Q35 (=G31/P31?)
It makes a lot more sense for me to look at it that way.

The Q45 still looks like the odd one out, though. I'm tempted to do another motherboard swap, and compare the Q45 to the Q35 and AMD 740G I've already tested.

Blue_Sky
Posts: 217
Joined: Tue Jun 05, 2007 8:44 am
Location: Kingston, ON, Canada

Post by Blue_Sky » Fri Mar 27, 2009 3:52 pm

X58: TDP 24.1 W, idle 8.5 W
Source, p 13.
US15W (new Atom chipset): TDP 2.3W, idle unspecified*
Source, p 423.
* With a Z530, it is said to idle at 5 W, as per a number of manufacturers.

Post Reply