It is currently Thu Jun 22, 2017 11:00 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: How does one dim the Antec P150 case LED's?
PostPosted: Sat Nov 04, 2006 6:05 pm 
Offline

Joined: Thu Jan 05, 2006 3:47 pm
Posts: 12
While this isnt quiet related, I know alot of you are like me and dont care for your case to light up to bright and prefer a more low profile appearance.

I have been trying to search for an answer to this question, particularly what resistor specs I should look for to dim the blue front panel leds (power mainly, and the hdd activity also) on the antec p150 case by about 70-80%. I want to still be able to see the light, just not from space. Since I dont know anything about the specs on the two led's, finding the information I need has been troublesome.

If anyone has done something like this to their p150 or anything else I would really appreciate your input on what parts to pick up to get my desired affect, thanks in advance.

Sejin


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 04, 2006 8:29 pm 
Offline

Joined: Sat Jan 21, 2006 6:12 pm
Posts: 74
the easy way to do it is to put a piece of paper right over it. if that's too dim then try wax paper. crude but it works.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 05, 2006 7:39 am 
Offline
SPCR Reviewer

Joined: Sat Nov 23, 2002 6:33 am
Posts: 8636
Location: Sunny SoCal
I used a black "Sharpie" marking pen on the front of the light, and wrapped the sides of the tube in electrical tape.

_________________
Main Box: Intel i3-3225, Intel DH77EB, 16GB Corsair RAM, 256GB Samsung 830, SS360GP PSU, CM PS07 case.
Music Server: Intel DH77EB + i3-3220, 2xSamsung 2TB F4, Pico PSU, Fractal Define Mini, 2xScythe Fans @250 rpm.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 05, 2006 11:57 am 
Offline

Joined: Sun Sep 18, 2005 2:39 pm
Posts: 35
Ooh, I was wondering this too. I think I'll try that Sharpie trick. Thanks!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 05, 2006 1:23 pm 
Offline

Joined: Sat Sep 16, 2006 10:30 am
Posts: 129
Location: Kahaluu, Hawaii
I have the same question and posted it somewhere.

I got a couple answers about soldering resistors and such as well as the paper and Sharpie offerings. If I can figure out where I posted it I'll get back to you on the resistors.

I don't get the designers, this is a really annoying aspect of almost all LED installations. I guess the notion is someone wearing lead glasses or blind or on the moon might not see the LED so best to make it as bright as is possible.

They could tone it down 90% or even more and it would still be effective. Its not like we need to read by it.

_________________
Invent the Future


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 05, 2006 7:09 pm 
Offline

Joined: Thu Jan 19, 2006 5:14 am
Posts: 311
Location: Toronto
Personally I just unplug them. LEDs are so useless <.<


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 06, 2006 1:11 am 
Offline

Joined: Sun Sep 25, 2005 10:48 pm
Posts: 198
Location: Stockholm, Sweden
Check out my post in this thread. (Last post in the thread)

_________________
P150 | Q6600 | 4GB RAM | TRUE | 2x Nexus 120mm | 7800 GTX


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 06, 2006 2:09 am 
Offline
Friend of SPCR

Joined: Wed Dec 17, 2003 6:14 am
Posts: 1251
Location: Finland
Who cares if hdd led is blinking or not, just unplug it. Same goes for the power led. Mine are behind the front bezel anyway.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 06, 2006 4:55 pm 
Offline

Joined: Fri Oct 14, 2005 2:40 pm
Posts: 130
I personally need the led's on (otherwise i don't know if my pc is on), but at night it's pretty annoying. So I just added a switch into the circuit.

_________________
My rig
AMD Opteron 146 @ 2.6 ghz
2x512 Kingston HyperX 2.5-4-4-10 @ 260
80gb Western Digital
160gb Seagate Barracuda .9
200gb Maxtor diamondmax 10
BFG 6600gt OC @ 650/1600


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 09, 2006 8:33 am 
Offline

Joined: Sat Dec 27, 2003 1:57 pm
Posts: 139
Location: Minnesota
On my center Logitech speaker, I cut out a piece from the sticky part of a post-it to cover the way-too-bright blue LED. Works great and I can still see whether it's on or off.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 09, 2006 3:38 pm 
Offline
Friend of SPCR

Joined: Wed Dec 17, 2003 6:14 am
Posts: 1251
Location: Finland
Ryan wrote:
I personally need the led's on (otherwise i don't know if my pc is on), but at night it's pretty annoying. So I just added a switch into the circuit.


If it's on, it responds to keyboard/mouse and brings the monitor out of power save mode. No leds needed.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 10, 2006 6:04 am 
Offline

Joined: Mon Apr 25, 2005 10:00 am
Posts: 2131
Location: Grand Rapids, MI
You can solder some resistors in line with the LED to dim it down. If you look on the OrigenAE forums for the X11 LED, it has a pretty good description of how to do it. I think it involved some 470Ohm or 700Ohm resistors (I got mine at Radioshack). Worked quite well on my X11 Power LED.

_________________
HTPC: OrigenAE X11|Gigabyte GA-MA785GPMT-UD2H|Phenom II x3 740BE w/AC Freezer 7|150GB Velociraptor|Corsair VX450
Main: Antec 300 (SlipStream @ 800rpm/140mm @ 5v)|Asus M4A88TD-M|Phenom II x4 945 (Mugen2 pass.)|Asus EAH6850|Samsung 830 128GB|Antec TP750
WHS: DF-85|P8H67-M Pro|I5-3450S/Hyper 212+|Corsair AX650|Sandisk Extreme 240GB, 2xWD20EARS, 2x WD15EARS, WD15EADS


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 10, 2007 10:13 am 
Offline

Joined: Tue Feb 01, 2005 9:59 am
Posts: 78
lm wrote:
Ryan wrote:
I personally need the led's on (otherwise i don't know if my pc is on), but at night it's pretty annoying. So I just added a switch into the circuit.


If it's on, it responds to keyboard/mouse and brings the monitor out of power save mode. No leds needed.
that's exactly what I was thinking

_________________
....


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 10, 2007 7:32 pm 
Offline

Joined: Wed Aug 09, 2006 3:15 pm
Posts: 39
jhhoffma wrote:
I think it involved some 470Ohm or 700Ohm resistors

Most LEDs need about that sort of range of resistor to not burn out, so adding another one should ~half the power to the LED. It'd have to be a pretty nasty LED to need more than that.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 11, 2007 6:43 am 
Offline
SPCR Reviewer

Joined: Sat Nov 23, 2002 6:33 am
Posts: 8636
Location: Sunny SoCal
I wrapped a piece of black electrical tape around the outside of the clear plastic tube, and gave the front of the tube a coat of Sharpie ink. I get zero light radiating out from the sides now, and just a bit from the front.

_________________
Main Box: Intel i3-3225, Intel DH77EB, 16GB Corsair RAM, 256GB Samsung 830, SS360GP PSU, CM PS07 case.
Music Server: Intel DH77EB + i3-3220, 2xSamsung 2TB F4, Pico PSU, Fractal Define Mini, 2xScythe Fans @250 rpm.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 27, 2008 7:06 pm 
Offline

Joined: Tue Feb 26, 2008 3:00 pm
Posts: 20
Location: usa
jhhoffma wrote:
You can solder some resistors in line with the LED to dim it down. If you look on the OrigenAE forums for the X11 LED, it has a pretty good description of how to do it. I think it involved some 470Ohm or 700Ohm resistors (I got mine at Radioshack). Worked quite well on my X11 Power LED.


Can you point me to the forum? Didn't see a link on the OrigenAE website and would like to give that idea a try.

Thanks.

_________________
"When the going gets weird, the weird turn pro." - HS Thompson


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 27, 2008 8:30 pm 
Offline

Joined: Mon Apr 25, 2005 10:00 am
Posts: 2131
Location: Grand Rapids, MI
That's the problem with resurrecting a dead thread, some of the info isn't valid anymore. About a month after I made that post, OrigenAE took their forums offline and redesigned their website. They don't have a forum anymore, which is lame, as their was more info there than in their entire website.

The steps are very easy if you've ever soldered before, just snip the leads, add a 470Ohm resistor in series and solder back together and it'll reduce the brightness by about 1/2.

_________________
HTPC: OrigenAE X11|Gigabyte GA-MA785GPMT-UD2H|Phenom II x3 740BE w/AC Freezer 7|150GB Velociraptor|Corsair VX450
Main: Antec 300 (SlipStream @ 800rpm/140mm @ 5v)|Asus M4A88TD-M|Phenom II x4 945 (Mugen2 pass.)|Asus EAH6850|Samsung 830 128GB|Antec TP750
WHS: DF-85|P8H67-M Pro|I5-3450S/Hyper 212+|Corsair AX650|Sandisk Extreme 240GB, 2xWD20EARS, 2x WD15EARS, WD15EADS


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 27, 2008 9:37 pm 
Offline

Joined: Tue Feb 26, 2008 3:00 pm
Posts: 20
Location: usa
Even I can do that...thanks!

_________________
"When the going gets weird, the weird turn pro." - HS Thompson


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 02, 2008 5:42 pm 
Offline

Joined: Sun Mar 02, 2008 5:27 pm
Posts: 21
Location: USA
annoying i know, probably a marker, otherwise resistors will require more work


Top
 Profile  
 
 Post subject: ULTRA HIGH TECH SOLUTION - a sheet of paper.
PostPosted: Sun Mar 02, 2008 6:42 pm 
Offline

Joined: Sat Aug 02, 2003 3:46 pm
Posts: 144
Location: Silicon Valley
No marker or soldering needed.

Just take a piece of ordinary white inkjet or laser printer plain paper or regular writing paper of almost any sort, and just slip it between the bezel and the LED. Tape it in place with the tape of your choice.

1. Open the bezel
2. tape paper over offending LED or cut paper to shape or wedge it in. Just get a sheet of paper over the LED somehow.
3. Close bezel.
4. Declare victory to the gentle blue glow of a tamed LED.

_________________
Abe
--------
Antec Solo, 550W NeoHE, GB EP45-UD3P, Intel Q9300, 4GB OCZ memory, Nexus 120mm rear fan, Thermalright HR-01+, Scythe 140mm CPU fan, 2-Nexus 92mm front fan, 512MB ATI 4670. 2-2TB Samsung F4, 1-1TB & 1-2TB WD Caviar Green, Pioneer 215 and 216 DVD-RWs.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group