It is currently Sat May 18, 2013 7:17 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 21 posts ] 
Author Message
 Post subject: Same old Solo (With pretty pictures)
PostPosted: Tue Jun 12, 2007 3:49 am 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
Welcome one and all to the latest revition of my “Quietâ€


Top
 Profile  
 
 Post subject: Re: Same old Solo (With pretty pictures)
PostPosted: Tue Jun 12, 2007 6:15 am 
Offline

Joined: Mon Apr 23, 2007 3:05 pm
Posts: 70
Location: New York, NY
Fat_bloater_dave wrote:
My Desk
Image

Oh oh I love this game! Let's see...

1. The lamp is under the desk
2. The keyboard is on the chair
3. There are birthday candles but no cake

I can only find three.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 12, 2007 6:40 am 
Offline

Joined: Sun Sep 10, 2006 2:56 pm
Posts: 154
Ever heard of dots after each sentence? Your grammar placed dots only after alinea's

LOL


Top
 Profile  
 
 Post subject: Re: Same old Solo (With pretty pictures)
PostPosted: Tue Jun 12, 2007 6:58 am 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
jbw wrote:
My Desk
Oh oh I love this game! Let's see...

1. The lamp is under the desk
2. The keyboard is on the chair
3. There are birthday candles but no cake

I can only find three.


What is this game then, not sure if i understand the rules.


Last edited by Fat_bloater_dave on Fri Jun 15, 2007 9:47 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 12, 2007 7:03 am 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
s_xero wrote:
Ever heard of dots after each sentence? Your grammar placed dots only after alinea's

LOL


Firstly i glad my Grammar Amuses you. Secondly what are "alinea's"


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 12, 2007 12:26 pm 
Offline

Joined: Wed Sep 21, 2005 5:57 am
Posts: 174
Location: Germany
Don't mind the cheap humor. :?

As for the purpose of your post, your build looks nice and tidy. Wasn't the cable management a dream in that case?

_________________
| SOLO w/ 1x 120mm 4412 F/2GLL rear, 2x 92mm 3412 N/2GLLE front | S12II 430W | ASUS P5K Premium | C2D E8400 OCd @3.60 w/ Ultra 120 & 120mm AF12025 PWM | ASUS 8600GT passive | 3GB Kingston ValueRam 800MHz | suspended 1x T166 500GB HDD & 1x 7200.7 120GB HDD | LiteOn DVD R/W | LiteOn DVD R | Vista Ultimate | EIZO S1931 |


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 12, 2007 2:53 pm 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
sun.moon wrote:
Don't mind the cheap humor. :?

As for the purpose of your post, your build looks nice and tidy. Wasn't the cable management a dream in that case?


Ah yes it was, also made better buy getting a SATA DVD Writer so i only need 1 IDE cable in the case, just have to replace that last Laptop drive and it will be all SATA.

Thanks for the on topic reply ;)


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 12, 2007 5:13 pm 
Offline

Joined: Wed May 09, 2007 2:31 am
Posts: 319
Location: Hell
pizza value?!?!


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jun 12, 2007 11:50 pm 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
jaldridge6 wrote:
pizza value?!?!


It has smaller red writeing saying Great Pizza Great value
they do good pizza


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 12:35 am 
Offline

Joined: Wed May 09, 2007 2:31 am
Posts: 319
Location: Hell
sorry i only said that to be off topic =P


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 10:33 am 
Offline

Joined: Thu Mar 22, 2007 10:28 am
Posts: 310
Fat_bloater_dave wrote:
s_xero wrote:
Ever heard of dots after each sentence? Your grammar placed dots only after alinea's

LOL


Firstly i glad my Grammar Amuses you. Secondly what are "alinea's"


Alinea is the Dutch word for paragraph. I find it entertaining that he's taking the time to correct your grammar, but doesn't find it necessary to express his thoughts properly in English. He fills in his vocabulary void with words from other languages. :D

Dave, I don't understand how you can be obsessed with having a quiet computer when you clearly have more pressing matters to attend to. Your desk layout is ridiculous. What is your lamp shining on? Your feet? All it does is highlight the cable clutter under your undersized desk.

Unless you're a hobbit with a chronic back injury, how does having your keyboard on a stool make any sense?

It honestly looks like the worst work enviroment I've ever seen. You have no room under your desk, or on your desk, and your lighting is being provided by a desklamp pointed in an arbitrary direction. :D

You can clearly afford it, so spend some money on a proper desk.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 12:26 pm 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
Moogles wrote:
Fat_bloater_dave wrote:
s_xero wrote:
Ever heard of dots after each sentence? Your grammar placed dots only after alinea's

LOL


Firstly i glad my Grammar Amuses you. Secondly what are "alinea's"


Alinea is the Dutch word for paragraph. I find it entertaining that he's taking the time to correct your grammar, but doesn't find it necessary to express his thoughts properly in English. He fills in his vocabulary void with words from other languages. :D

Dave, I don't understand how you can be obsessed with having a quiet computer when you clearly have more pressing matters to attend to. Your desk layout is ridiculous. What is your lamp shining on? Your feet? All it does is highlight the cable clutter under your undersized desk.

Unless you're a hobbit with a chronic back injury, how does having your keyboard on a stool make any sense?

It honestly looks like the worst work enviroment I've ever seen. You have no room under your desk, or on your desk, and your lighting is being provided by a desklamp pointed in an arbitrary direction. :D

You can clearly afford it, so spend some money on a proper desk.


Ah I see Dutch, that’s why I didn’t understand.

now to explain my room, My lamp is only used for when I’m fiddling inside my computer we had a spare lamp and I thought I might as well use it my ceiling light gives enough light for my room.

Secondly I’m not bothered about the cable clutter under my desk doesn’t affect me why fix it. There is plenty of room on my desk I can put a cup on it next to my monitor and I can put things I don’t need to grab quickly behind it.

Lastly what looks like a stool with my keyboard on it I actually use as a foot rest I have an arm chair I sit in to use my computer and my keyboard goes on my lap and trackball on the arm of the chair, you might say that this is a bad set up but I have been using it for a couple of years now and haven’t had any problems.
Image Image
So what looks like a bad setup is actually the peaceful bliss.


Top
 Profile  
 
 Post subject: Fan orientation
PostPosted: Wed Jun 13, 2007 12:38 pm 
Offline

Joined: Mon Sep 11, 2006 1:01 am
Posts: 299
Location: Vancouver Wa USA
What direction is the air moving from each of the three fans that are right next to each other? If the Nexus on back is blowing out, and the powersupply is also exhaust, then it looks like the fan on the heatsink is trying to fight those two fans, and might get more air flow if it were turned over. (If the air is blowing from the label side to the back side like the one on the back.)


Top
 Profile  
 
 Post subject: Re: Fan orientation
PostPosted: Wed Jun 13, 2007 12:51 pm 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
VanWaGuy wrote:
What direction is the air moving from each of the three fans that are right next to each other? If the Nexus on back is blowing out, and the powersupply is also exhaust, then it looks like the fan on the heatsink is trying to fight those two fans, and might get more air flow if it were turned over. (If the air is blowing from the label side to the back side like the one on the back.)


you might well be right, and i shall try that out one day but right now the only diffrence i would see would be maby a 1-2oC drop in temp, i think ill leave it for now.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 2:12 pm 
Offline

Joined: Thu Mar 22, 2007 10:28 am
Posts: 310
Dave, the armchair was the missing piece of the puzzle. Your setup makes a lot more sense now. :)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 2:53 pm 
Offline
*Lifetime Patron*

Joined: Mon May 23, 2005 7:05 am
Posts: 618
Location: State College, PA
that's a tidy setup - pretty much what I'd plan for myself if I had the money to upgrade. I like the arm chair too, must be comfy, though knowing me that 2nd monitor would be knocked off the desk pretty quickly.

I have a similar fan setup (though the HS has fresh air from a duct on the side of the case) and all the fans are set so low that there isn't really any conflicting airflows - all YL SLs set to minimum starting volts. I can even run my undervolted Sempron 2400+ (the POWER!) passively, but the HS fan doesn't add anything to the noise floor so I leave it on.

Have you undervolted your CPU? Any ideas on power draw? I'm interested in the HDD set up - do you use the 2.5in for the system drive and spin down the 3.5in internal drive? It's a setup I'm really interested in for my next future/ dream build.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 9:16 pm 
Offline

Joined: Fri May 21, 2004 12:42 pm
Posts: 27
Does your computer get dusty? Vaccum your room? Just kidding. The setup look pretty good. Where do you put your mouse?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 13, 2007 10:21 pm 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
mattthemuppet wrote:
that's a tidy setup - pretty much what I'd plan for myself if I had the money to upgrade. I like the arm chair too, must be comfy, though knowing me that 2nd monitor would be knocked off the desk pretty quickly.

I have a similar fan setup (though the HS has fresh air from a duct on the side of the case) and all the fans are set so low that there isn't really any conflicting airflows - all YL SLs set to minimum starting volts. I can even run my undervolted Sempron 2400+ (the POWER!) passively, but the HS fan doesn't add anything to the noise floor so I leave it on.

Have you undervolted your CPU? Any ideas on power draw? I'm interested in the HDD set up - do you use the 2.5in for the system drive and spin down the 3.5in internal drive? It's a setup I'm really interested in for my next future/ dream build.


Heh that second monitor isn’t going anywhere its gaffa taped to the desk.

Yes my CPU is undervolted using the built in cool and quiet that the AMD Processors have so it runs at 1.1v most of the time going up to 1.37v on load, I can run my CPU passively at idle it usually stays under 40c but the same as you it doesn’t add any noise so I keep the fan on and I’m sorry but I have no idea what the power draw is.

I do use the 2.5â€


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 14, 2007 11:22 am 
Offline

Joined: Wed Sep 21, 2005 5:57 am
Posts: 174
Location: Germany
Dave, I'm glad people are getting back to the facts here. Good thing that things are in perspective again. I couldn't believe you had to justify the surroundings of your PC to those guys. :roll:

Again, nice build!

_________________
| SOLO w/ 1x 120mm 4412 F/2GLL rear, 2x 92mm 3412 N/2GLLE front | S12II 430W | ASUS P5K Premium | C2D E8400 OCd @3.60 w/ Ultra 120 & 120mm AF12025 PWM | ASUS 8600GT passive | 3GB Kingston ValueRam 800MHz | suspended 1x T166 500GB HDD & 1x 7200.7 120GB HDD | LiteOn DVD R/W | LiteOn DVD R | Vista Ultimate | EIZO S1931 |


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 15, 2007 1:41 am 
Offline

Joined: Wed May 09, 2007 2:31 am
Posts: 319
Location: Hell
are those nexus fans running at 1000rpms?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 15, 2007 9:46 am 
Offline
*Lifetime Patron*

Joined: Sat Oct 22, 2005 10:39 am
Posts: 288
jaldridge6 wrote:
are those nexus fans running at 1000rpms?


I did put in my writeup what speed the fans were running at.

fat_bloater_dave wrote:
I can only read one fan speed unfortunately the CPU fan Spins at about 780 RPM below 35oC and 1035 RPM above 35oC, the reason I cant read the other fan speeds is because I have plugged the FanMate into a motherboard header but then I have plugged the Exhaust fan and Zalman Fan into the FanMate using a Y-Splitter and I have the FanMate set to the lowest setting at all times the reading of the RPM in SpeedFan just jumps around all the time.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group