my new rig - opteron 180 in antec P-182

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

my new rig - opteron 180 in antec P-182

Post by raziell » Sat May 26, 2007 1:41 am

just move from P-150 to my new toy....
i add 2 smartdrive 2002 copper and i can say that it"s an amazing product
it reduce all the noise from my samsung....


Image

Image

Image

Image
love this place 8)
ido
Last edited by raziell on Sun May 27, 2007 1:03 am, edited 1 time in total.

amjedm
Posts: 489
Joined: Wed Aug 04, 2004 8:32 am
Location: UK

Post by amjedm » Sat May 26, 2007 4:45 am

Very nice tidy setup :)

Which Samsung HD(s) have you got?

How much quieter is the P180 compared to the P150 in stock form (without the Smartdrives)?

raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

Post by raziell » Sat May 26, 2007 8:29 am

thank you for the compliment amjedm :D
the HD model is HD401LJ wich is the 16 MB buffer,befor the samsun i had
2 WD caviar se 200 gb,i can say that the samsung came with mix feelings,one of the HD was dead silent and the other one was a littile bit loud :cry:
but when i put them on the smartdrive both of them were dead silent so its ok.
i think its really depends in the hardware that you choose to put inside because in the P-150 i had 2 92 fans in the front and one nexus 120 in the back and one nexus on the cpu and now i have only 2 120 mm fans in all the case (i forget the fan in the psu ) and the p-182 use a diffrent materials to isolation then the p-150.
ido

Sylph-DS
Posts: 223
Joined: Wed Apr 04, 2007 2:56 am
Location: The Netherlands

Post by Sylph-DS » Sat May 26, 2007 11:26 am

Tidy wiring! Looks like the combination of motherboard and case doesn't make it very hard though.

Something that catches my eye is that the motherboard has an alternatively positioned CPU-socket and with that CPU-cooler, which means the awesome Ninja isn't as close to the fans as in a setup with a standard motherboard. Does this effect the cooling capacities a lot?

Good job :)

angelkiller
Posts: 871
Joined: Fri Jan 05, 2007 11:37 am
Location: North Carolina

Post by angelkiller » Sat May 26, 2007 6:49 pm

:shock: Wow, that's AWESOME!! :D An OC'ed Operon, FANLESS and a passive 7950GT!! All on a DFI LanParty!

VERY very nice!

raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

Post by raziell » Sun May 27, 2007 1:05 am

angelkiller wrote::shock: Wow, that's AWESOME!! :D An OC'ed Operon, FANLESS and a passive 7950GT!! All on a DFI LanParty!

VERY very nice!
10X .... 8)
i put a lot of time in picking the suitable hardware and it was worth it.

v3n
Posts: 73
Joined: Tue Feb 17, 2004 3:48 am
Location: UK

Post by v3n » Thu Jun 14, 2007 6:28 am

nice setup

what temps do u get after an hour or so of Orthos blend :?:

ayjay
Posts: 48
Joined: Mon Apr 23, 2007 11:01 am

Post by ayjay » Thu Jun 14, 2007 7:41 am

what are your hard drive temps like now?

raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

Post by raziell » Fri Jun 22, 2007 10:28 pm

the temps are :
Image

the HD are in raid so i cant take the temp by software.
sold the P182....
soon to be a owner of a P182 SE 8)
Last edited by raziell on Fri Jun 22, 2007 11:48 pm, edited 2 times in total.

iakovl
Posts: 139
Joined: Wed Mar 09, 2005 6:49 am
Location: israel
Contact:

Post by iakovl » Fri Jun 22, 2007 10:58 pm

so thats why u sold the 182...
i have to ask u, where did u get the smart drive?

raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

Post by raziell » Fri Jun 22, 2007 11:49 pm

a user from israel?
welcome my friend
i buy from endpcnoise http://www.endpcnoise.com/cgi-bin/e/std ... e2002.html
they ship worlwide,you will pay custom but it worth every $.

TMM
Posts: 71
Joined: Fri May 06, 2005 3:03 pm
Location: Melbourne, Australia

Post by TMM » Sat Jun 23, 2007 7:48 pm

Wow, i have a similar setup :p (Dualcore Opteron/DFI Nf4/Ninja/Gskill HZ/ and even got an NB47J on my chipset).

I'd check your temps with Core Temp as they are probably getting pretty high running passive. My load temps are 65C running Orthos and i have a Nexus @ 900rpm~ on my Ninja. Smartguardian is way too low for the CPU, it only says ~50C when Core Temp says 70C.

partyzan
Posts: 8
Joined: Mon Jun 25, 2007 7:34 am

Post by partyzan » Mon Jun 25, 2007 7:38 am

raziell wrote: sold the P182....
soon to be a owner of a P182 SE 8)
So thats why you sold it....
I'm the one who bought your case :lol: Thought about getting the SE myself before I saw yor ad :roll:
Love the case so far, a bit hot though but thats the weather here...

RBBOT
Posts: 93
Joined: Thu May 17, 2007 9:02 am

Post by RBBOT » Thu Jun 28, 2007 4:30 am

The temperatures screenshot you posted - that looks to be when the PC is idle. I'd recommend you download and run the Orthos load testing tool and see how much they climb when running that for a long period - it will tell you if your cooling really is sufficient.

raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

Post by raziell » Thu Jun 28, 2007 5:14 am

you right,i just replace my cpu to opteron 170 (better overcloker - 2900 MHZ ) and im waiting to my new p182 se,when i will get the case i will build my setup and give you the temps in idile and load.

jaldridge6
Posts: 319
Joined: Wed May 09, 2007 2:31 am
Location: Hell

Post by jaldridge6 » Sun Jul 15, 2007 11:14 pm

when we gonna get SE edition picz? ;-/

raziell
Posts: 96
Joined: Sat Jan 07, 2006 3:06 am
Location: the Golan Heights,israel

Post by raziell » Mon Jul 16, 2007 4:51 am

my ex girlfriend is bringing the p182 se from NYC (it"s very expensive here in israel) on Thursday,i believe next week i will assemble him and upload some new pics...
ido

Post Reply