my new rig - opteron 180 in antec P-182
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
my new rig - opteron 180 in antec P-182
just move from P-150 to my new toy....
i add 2 smartdrive 2002 copper and i can say that it"s an amazing product
it reduce all the noise from my samsung....
love this place
ido
i add 2 smartdrive 2002 copper and i can say that it"s an amazing product
it reduce all the noise from my samsung....
love this place
ido
Last edited by raziell on Sun May 27, 2007 1:03 am, edited 1 time in total.
thank you for the compliment amjedm
the HD model is HD401LJ wich is the 16 MB buffer,befor the samsun i had
2 WD caviar se 200 gb,i can say that the samsung came with mix feelings,one of the HD was dead silent and the other one was a littile bit loud
but when i put them on the smartdrive both of them were dead silent so its ok.
i think its really depends in the hardware that you choose to put inside because in the P-150 i had 2 92 fans in the front and one nexus 120 in the back and one nexus on the cpu and now i have only 2 120 mm fans in all the case (i forget the fan in the psu ) and the p-182 use a diffrent materials to isolation then the p-150.
ido
the HD model is HD401LJ wich is the 16 MB buffer,befor the samsun i had
2 WD caviar se 200 gb,i can say that the samsung came with mix feelings,one of the HD was dead silent and the other one was a littile bit loud
but when i put them on the smartdrive both of them were dead silent so its ok.
i think its really depends in the hardware that you choose to put inside because in the P-150 i had 2 92 fans in the front and one nexus 120 in the back and one nexus on the cpu and now i have only 2 120 mm fans in all the case (i forget the fan in the psu ) and the p-182 use a diffrent materials to isolation then the p-150.
ido
Tidy wiring! Looks like the combination of motherboard and case doesn't make it very hard though.
Something that catches my eye is that the motherboard has an alternatively positioned CPU-socket and with that CPU-cooler, which means the awesome Ninja isn't as close to the fans as in a setup with a standard motherboard. Does this effect the cooling capacities a lot?
Good job
Something that catches my eye is that the motherboard has an alternatively positioned CPU-socket and with that CPU-cooler, which means the awesome Ninja isn't as close to the fans as in a setup with a standard motherboard. Does this effect the cooling capacities a lot?
Good job
-
- Posts: 871
- Joined: Fri Jan 05, 2007 11:37 am
- Location: North Carolina
a user from israel?
welcome my friend
i buy from endpcnoise http://www.endpcnoise.com/cgi-bin/e/std ... e2002.html
they ship worlwide,you will pay custom but it worth every $.
welcome my friend
i buy from endpcnoise http://www.endpcnoise.com/cgi-bin/e/std ... e2002.html
they ship worlwide,you will pay custom but it worth every $.
Wow, i have a similar setup :p (Dualcore Opteron/DFI Nf4/Ninja/Gskill HZ/ and even got an NB47J on my chipset).
I'd check your temps with Core Temp as they are probably getting pretty high running passive. My load temps are 65C running Orthos and i have a Nexus @ 900rpm~ on my Ninja. Smartguardian is way too low for the CPU, it only says ~50C when Core Temp says 70C.
I'd check your temps with Core Temp as they are probably getting pretty high running passive. My load temps are 65C running Orthos and i have a Nexus @ 900rpm~ on my Ninja. Smartguardian is way too low for the CPU, it only says ~50C when Core Temp says 70C.
-
- Posts: 319
- Joined: Wed May 09, 2007 2:31 am
- Location: Hell