Thought I'd share my, now, very quiet rig.
Antec P180b - top blowhole covered with foam
SeaSonic S12+ 650W
Gigabyte DS3Pro with Thermalright HR-05 NB Cooler
Intel E6400 with Thermalright Ultra-120 and Nexus fan @ 45-55% through Speedfan
4Gb Corsair TWIN2X2048-6400C4
Inno3D 8800GT 512Mb w/ AC Accelero S1
1xScythe Kama Bay fan (800RPM) on Accelero S1
Pioneer DVR-212D SATA Burner
1x500Gb Western Digital WD5000AAKS
1x750Gb Western Digital WD7500AACS
Nexus Real Silent 120mm fan (rear between 45-55% through Speedfan, HDD fan at 7v)
Scythe Kama Bay
Stock Inno3D 8800GT.
Stock cooler removed from the card.
The 8800GT all cleaned up (a little fuzzy, sorry).
RAM Sinks attached (it seems that they are stuck on there pretty good, guess I'll have to wait and see).
AC Accelero S1 waiting to be installed.
AC Accelero S1 installed on the card.
Scythe Kama Bay fan attached to S1 with 4 zip ties (simple).
Card installed in my computer.
The WD bros. WD5000AAKS furthest in and the WD7500AACS.
Another shot of the S1 installed in the case.
And another one (it takes up a whole lot of space, luckily I don't have any other expansion cards I need to install).
Temps: (idle/load, ambient ~29*C)
VGA (Stock cooling) -
VGA (S1 Passive) -
VGA (S1 + Fan @ 800RPM) -
Sys and Storage Drives: 38*C/45*C
Did some testing with overclocking my CPU to 3.1Ghz @ 8x390 (The DS3P seems to have an issue with runnning 4Gb RAM @ 800Mhz 4-4-4-12 timings).
CPU-Z and Speedfan
Loaded CPU/GPU by running through Crysis Benchmark on High and Medium.
Thank you for looking.