P182, 14 drives, SSD, Raid5+6, Status: V.5 New pics up

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

P182, 14 drives, SSD, Raid5+6, Status: V.5 New pics up

Post by Panter » Tue Oct 02, 2007 2:33 am


EDIT:
Late November 2009, after the pc had been in work for 2 years I felt it was time for some serious renewing.. Clean some dust, cut some plastic, bend some metal, cut and solder some wires, replace some parts and get more storage.

This new version is found on page 2, posted Wed Mar 17, 2010 and later.
New pics up Sep 22, 2010.



After several weeks of reading, planning, thinking, buying, driving, waiting, lapping, cutting, drilling, bleeding, soldering and lots of blood, sweat and tears I can finally present my new workstation and file-server. It's not yet completed, but here's an preview. It's V.0.8Beta. The previous Betas was a closed invitational only :-)

The parts so far:
Antec P182 with 2 Tricool fans
Corsair HX620W
Gigabyte GA-P35-DS4, rev 1.1
Corsair TWIN2X2048-6400C4
Intel Core 2 Quad Q6600, stepping G0, Lapped
Thermalright Ultra-120 eXtreme, Lapped, with Coin
Arctic Silver 5
Gainward GeForce 8500 GT 512 MB
BenQ DW1640
Samsung Spinpoint T133 HD401LJ
Nexus D12SL-12 BW * 2
Noctua NF-S12-1200 * 2
Akasa AK-FC-06SL
+ 2 components I'm still waiting for.

Enough talk, here is some pictures to start with, but I'm not a photographer.. More will follow.

2 pictures of the front with different lightning.
Image

Inside:
Image

No problem to get the panel back on:
Image
Last edited by Panter on Wed Sep 22, 2010 8:10 am, edited 12 times in total.

Kasper
Posts: 6
Joined: Mon Oct 01, 2007 6:12 pm
Location: Melbourne, Australia!

Post by Kasper » Tue Oct 02, 2007 3:48 am

Very pretty,

What two parts are you still waiting for? And did you run into any major troubles while building?

quest_for_silence
Posts: 5275
Joined: Wed Jun 13, 2007 10:12 am
Location: ITALY

Re: My version of Antec P182+++. Pictures. WIP. Status: V.0.

Post by quest_for_silence » Tue Oct 02, 2007 5:03 am

Panter wrote:Image
How have you made the intake front grill?

Luca

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Re: My version of Antec P182+++. Pictures. WIP. Status: V.0.

Post by Panter » Tue Oct 02, 2007 6:02 am

Kasper wrote:Very pretty,

What two parts are you still waiting for? And did you run into any major troubles while building?
Thank you. No, nothing I would call problem, but lot of research of what parts to use and planning how to do it.

Here's a preview of one of the main part missing:
Image
quest_for_silence wrote: How have you made the intake front grill?
I didn't know what to use for the grill, but planned to go to Ikea and buy a office trashcan or something like that when I remembered that I had some old hifi speakers in the basement. It's the speakers front :-)

It's actually no screws or anything that holds it now, It's very solid, but maybe I will use some screws later.
Last edited by Panter on Fri Oct 05, 2007 8:12 am, edited 1 time in total.

Konnetikut
Posts: 153
Joined: Sat Jan 13, 2007 10:14 pm
Location: Vancouver
Contact:

Post by Konnetikut » Tue Oct 02, 2007 6:50 am

That's a very nice mod.
Did you not install the DVD drive all the way in on purpose?

Wibla
Friend of SPCR
Posts: 779
Joined: Sun Jun 03, 2007 12:03 am
Location: Norway

Post by Wibla » Tue Oct 02, 2007 6:58 am

smart thing with the DVDRW actually, as the overhang from the case is like 3/4"...

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Tue Oct 02, 2007 7:20 am

Konnetikut wrote:That's a very nice mod.
Did you not install the DVD drive all the way in on purpose?
Thanks!
Yes, it's on purpose, the tray is more accessable in the front and it makes some more room inside.

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Wed Oct 03, 2007 2:38 am

I was able to finish V. 1.0 yesterday!
The main colors inside are now blue, red and black. Hate the yellow Gigabyte E-Sata cables..

Changelog:
Installed the Giabyte E-Sata cables, but sleeved black
The cables for the Usb ports on the back also black
Removed the AC'97 plug from the front-audio cable

The pc looks like it's finished, but I have more planned. Stay tuned! :-)

Image
Last edited by Panter on Fri Oct 05, 2007 8:13 am, edited 1 time in total.

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Fri Oct 05, 2007 8:08 am

Version 2.0 !

Added:
8 Samsung 500 GB Sata
Promise Supertrak EX8350, Sata Raid.

The Samsung 400 GB will be for the OS and the 8 500GB in Raid6.

First are 2 pictures of the modification behind the top fan.

Then a pre v. 2.0 picture with all the harddrives installed. The lenghts of the powercables and the numbers of connectors was just perfect! I had to add only one custommade powercable. Without the Sata cables installed you can hardly see that there are 9 harddrives!

Last some pictures of version 2.0. The pc is much nicer in real life, blame the camera and the person behind the camera..

I still have som details to finish and 2 small modifications so there will be an v. 2.5 or v. 3.0 :-)

Btw, thank you for this great forum and inspiration like the projects from Wibla, The.Jackal, Konnetikut, falcon26 etc

I welcome any comments, what do you think? :-)

Image

Image

Pre V. 2.0
Image

Version 2.0
Image

Image

Image
Last edited by Panter on Fri Oct 05, 2007 10:27 am, edited 1 time in total.

ddrueding1
Posts: 419
Joined: Sun Sep 19, 2004 1:05 pm
Location: Palo Alto, CA

Post by ddrueding1 » Fri Oct 05, 2007 8:41 am

Looks good, very clean considering. I gave up on my P180 when I got more than 6 drives. Getting all the SATA connections to look clean is a real PITA.

elec999
Posts: 273
Joined: Wed Jun 30, 2004 10:54 pm

Post by elec999 » Fri Oct 05, 2007 10:10 am

Very clean setup.
Thanks

Wibla
Friend of SPCR
Posts: 779
Joined: Sun Jun 03, 2007 12:03 am
Location: Norway

Post by Wibla » Fri Oct 05, 2007 11:26 am

what temps are you getting? :)

Konnetikut
Posts: 153
Joined: Sat Jan 13, 2007 10:14 pm
Location: Vancouver
Contact:

Post by Konnetikut » Fri Oct 05, 2007 10:13 pm

That's VERY nice for the number of drives you have in there.

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Sat Oct 06, 2007 10:40 am

Wibla wrote:what temps are you getting? :)
I've been finishing v. 3.0. More on that later, if you want to see.. :-)

First I installed Xp and after several hours of formating and updating Xp with all the hotfixes, drivers and rebooting I downloaded a file from a manufactores official website what contained a virus! So all the hours for nothing. Have a antivirus program, but better safe than sorry so will format and reinstall everthing.. Argh..

Ran Prime95 with 4 cores for 50 minutes, stock clocking, temps are 46 - 43 - 43 - 43 Cº. Every core fluctates 1-2 degrees.

Chrononaut
Posts: 4
Joined: Sat Oct 06, 2007 12:38 pm

Post by Chrononaut » Sat Oct 06, 2007 12:48 pm

Nice!

Longbow
Posts: 134
Joined: Sun May 09, 2004 12:14 pm
Location: Middle Earth

Post by Longbow » Sun Oct 07, 2007 3:33 pm

very nice cabling! :P

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Tue Oct 09, 2007 3:49 pm

Version 3.0 and supposedly the final version is finished! I bought the first parts for this pc 27. august and I'm more than ready to put the pc to work.

My workstation and fileserver:
Image

Changelog from v. 2.0:
Added 8 Leds in the front for each Raid-HD.
Connected the Rpm-wire for the 3 fans controlled by the fancontroller to its separate fanheader on the motherboard.

Then all the final parts are:
Case: Antec P182
Power: Corsair HX620W
Mainboard: Gigabyte GA-P35-DS4, rev 1.1
Ram: 2 x 1GB Corsair TWIN2X2048-6400C4
Cpu: Intel Core 2 Quad Q6600, stepping G0, Lapped
Cooler: Thermalright Ultra-120 eXtreme, Lapped, with Coin
Thermal paste: Arctic Silver 5
Graphics: Gainward GeForce 8500 GT 512MB Fanless
Dvd +- RW: BenQ DW1640
HD for OS: Samsung Spinpoint T133 HD401LJ 400GB
Raidcontroller: Promise SuperTrak EX8350
HD for Raid6: 8 x Spinpoint T166 HD501LJ 500GB
Fan, Cpu and front top: 2 x Nexus D12SL-12 BW
Fan, front center and bottom: 2 x Noctua NF-S12-1200
Fan, back and top exhaust: 2 x Antec Tricool
Fancontroller: Akasa AK-FC-06SL
Other parts: Cable ties, leds, ledholders, resistors, wires, solder, metalgrill, fanheader connectors, shrinktubes etc and if I did not tell you, lots of cable ties.. :-)

I have because of the Raidcontroller and its Ram bought a UPS, Powerware 5110 1000VA.

Frontpicture with custom fan, leds and fancontroller:
Image

I have spent much time testing different Leds and resistors to get the Leds not to bright. It's very nice, but of course it's no real practical use I guess. :-)
Image Image

Inside, very few differences from v. 2.0. Just added 3 fanheaders and the cable for the Leds from the Raid-controller. Don't forget that there's lots of cables, E-Sata, Usb, Sata, power, audio, cable for leds, fans etc.
Image

Again many cables and cable ties, but the panel is no problem to get back on:
Image

Able to check the fans Rpm
Image

I'm extremely happy with the pc. Have not been able to test it so much yet, but for me it's very fast and quiet. And heavy..
I have not overclocked it and will probably not yet. I just need a very stable pc, the Quad is already a overkill for my use. It will mostly be controlled by Remote Desktop.
Btw, it took approx 32 hours to initialize the Raid6 and then several hours to format the 3TB drive..

As always, I love to get some comments and feel free to ask any questions.

Peron
Posts: 7
Joined: Mon Jun 25, 2007 5:40 am
Location: Sweden, Gothenburg

Post by Peron » Tue Oct 09, 2007 7:09 pm

I was taking a fast look through this thread as I'm going to bed soon. But what I saw from it, it was among the cleanest cable management I'd ever seen especially the red s-ata cables! Why do you use 8 harddrives? and what do you think of the buzz whining acpects of the hx620?

Very nice rig! like your hd suspension almost looks cleaner then the Solo!

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Wed Oct 10, 2007 1:28 pm

Peron wrote:I was taking a fast look through this thread as I'm going to bed soon. But what I saw from it, it was among the cleanest cable management I'd ever seen especially the red s-ata cables! Why do you use 8 harddrives? and what do you think of the buzz whining acpects of the hx620?

Very nice rig! like your hd suspension almost looks cleaner then the Solo!
Thanks! Why 8 drives for the Raid? Well.. File-server, more harddrives, more storage. Easy. :-)

So far I have not noticed any buzz from the Psu.

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Sun Oct 14, 2007 12:38 pm

No more comments or questions about my rig that probably weights 1 metric tonn?
:-(

Luminair
Posts: 223
Joined: Wed Mar 21, 2007 10:45 am

Post by Luminair » Sun Oct 14, 2007 1:39 pm

Panter wrote:No more comments or questions about my rig that probably weights 1 metric tonn?
:-(
It looks good :) The plastic fan covers serve no good purpose though!

jedimaster1138
Posts: 7
Joined: Wed Oct 10, 2007 10:23 am
Location: NYC

Post by jedimaster1138 » Sun Oct 14, 2007 4:47 pm

Panter- did you mount a fan at the front of the P182, at the bottom? I mean in front of the lower hard drive cage, presumably, blowing across the 4 drives mounted at the bottom.

I'm building a rig with a P182, it's going to have 4 drives and I've been going back and forth as to how to lay them into the P182....all four at the bottom, 2 in the bottom, 2 in the middle...some number in 5.25 bays... etc.

Curious if you added a fan at the front of the 182 to compliment the fan that lives in between that bay and the PSU assuming such a mounting is possible without really going nuts with the Dremel :D

My first batch of parts should arrive tomorrow...

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Sun Oct 14, 2007 5:06 pm

Luminair, "plastic fan covers"? Do you mean the 2 doors in the front?

jedimaster1138, there is no fan in front of the lower hard drive cage, just the one in between. I saw it maybe could be possible to fit a fan in front, but I did not try or gave it very much attention. I guess the closed "tunnell" with the fan and the Psu-fan will create a good airflow.

Good luck with your new parts.

zorrt
Posts: 58
Joined: Tue Oct 16, 2007 1:13 am

Post by zorrt » Tue Oct 16, 2007 1:18 am

question, whats that thing you used to mount your hdd in the 5.25" bays? I have 1 IDE hdd but I want to move it away because I think its blocking airflow for my video card. So its either ditch the drive or move it up.

PS, your post was the first post I saw in this forum and it inspired me to run my cables behind my case too ahah. Considering if I should cut holes in the case too. Only stupid thing is that my seasonic s12 power cable is too short so I can't run it behind the case.

Turas
Posts: 43
Joined: Thu Aug 02, 2007 9:29 am
Location: Alexandria, VA

Post by Turas » Tue Oct 16, 2007 7:16 am

Can you com do my cables?
:)

Nick Geraedts
SPCR Reviewer
Posts: 561
Joined: Tue May 30, 2006 8:22 pm
Location: Vancouver, BC

Post by Nick Geraedts » Tue Oct 16, 2007 11:35 am

How did you manage to do the LED's? Did you use the pinouts from the RAID card, and just build your own LED circuitry?

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Tue Oct 16, 2007 2:14 pm

zorrt, it's O-rings plumbers use. 75 mm. I think it's not used in new installations anymore, but plumbers kan order them for repair of old systems.
It's very stable and others have uses this for years without the rubber to break.

Nice to think I inspired someone. I got much of my inspiration from other prosject at this forum. :-)

Turas, sure. Just pay me well.. :-)

Nick Geraedts, I made a custom cable with a connector attached to the Led pins on the Raid card. Actually very easy, but I spent some time to built the connector and test the cable. The hardest part was to find the correct leds and resistors so the leds did not shine to bright.

Nick Geraedts
SPCR Reviewer
Posts: 561
Joined: Tue May 30, 2006 8:22 pm
Location: Vancouver, BC

Post by Nick Geraedts » Tue Oct 16, 2007 3:59 pm

Panter wrote:Nick Geraedts, I made a custom cable with a connector attached to the Led pins on the Raid card. Actually very easy, but I spent some time to built the connector and test the cable. The hardest part was to find the correct leds and resistors so the leds did not shine to bright.

Would that happen to be the black sleeved cable running under the RAID card? I was thinking of doing something similar with my setup, but haven't got around to it yet.

Panter
Posts: 37
Joined: Sat Sep 15, 2007 8:39 am
Location: Norway

Post by Panter » Tue Oct 16, 2007 4:11 pm

Nick Geraedts wrote:
Panter wrote:Nick Geraedts, I made a custom cable with a connector attached to the Led pins on the Raid card. Actually very easy, but I spent some time to built the connector and test the cable. The hardest part was to find the correct leds and resistors so the leds did not shine to bright.

Would that happen to be the black sleeved cable running under the RAID card? I was thinking of doing something similar with my setup, but haven't got around to it yet.
No, that's the front audio cable.
I will try to to take a picture, but it's not much to see..

zorrt
Posts: 58
Joined: Tue Oct 16, 2007 1:13 am

Post by zorrt » Tue Oct 16, 2007 7:54 pm

Panter wrote:zorrt, it's O-rings plumbers use. 75 mm. I think it's not used in new installations anymore, but plumbers kan order them for repair of old systems.
It's very stable and others have uses this for years without the rubber to break.
I thought it was something like that. I'll have a look around for something like that around. Thanks!

Post Reply