CES 2008, Day 1: Antec, Arctic Cooling, CoolIT
Thumbs up for Antec Three Hundred.
Seems to have listened to some of my wishes in this thread although they probably had the same thoughts already.![Very Happy :D](./images/smilies/icon_biggrin.gif)
P180B = best case ever.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Accelero Xtreme.
Is this a new Thermalright HR-03 killer.
They already seem to lead with the Accelero S1, and now.....![Shocked :shock:](./images/smilies/icon_eek.gif)
Seems to have listened to some of my wishes in this thread although they probably had the same thoughts already.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
P180B = best case ever.
Needless to say I prefer this over my P180B anytime (CM690 inspired =good).- The lower chamber height should just barely fit a 120 mm fan (smaller case).
I would like to see the door removed. The dust filter should preferably just be one big one.
As pointed out by Luminair
- The fans should be changed
(we "all" do that as well here)
Remove the cages and the 3.5 and 5.25 inch slots.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Accelero Xtreme.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
They already seem to lead with the Accelero S1, and now.....
![Shocked :shock:](./images/smilies/icon_eek.gif)
I love the mini P180. The only qualm I have with it is the top fan. It's going to house a matx system, so it won't really need two exhaust fans. Anyway once released, it's going to be easily the best matx case on the market. I almost feel bad for buying NSK3400, almost.
Btw, the article says: "Everything about the Mini is nearly identical to the original P180, from the double removable HDD cages to the large 200mm top TriCool fan." AFAIK, P180 had no 200mm fan.
I hope SPCR reviews Big Boy 200 asap, before people get hyped for nothing.
Btw, the article says: "Everything about the Mini is nearly identical to the original P180, from the double removable HDD cages to the large 200mm top TriCool fan." AFAIK, P180 had no 200mm fan.
I hope SPCR reviews Big Boy 200 asap, before people get hyped for nothing.
Not. So. Fast.Erssa wrote:Anyway once released, it's going to be easily the best matx case on the market. I almost feel bad for buying NSK3400, almost.
Two major reasons why people typically go mATX:
1) Smaller Size
2) Lower Price
The mini P180:
1) Is huge for an mATX case. In terms of size, the mP180 is to the P180 family what the NSK3840 is to the mP180!
![Image](http://img503.imageshack.us/img503/8964/9064p182sevsmp180vsnsk3yi7.th.jpg)
2) Is expected to retail for 160 dollars, nearly twice the cost of the NSK3480.
Although admittedly arbitrary, a third objection is that the ventilation holes on the front--and especially the top--of the mp180 make the case ugly in my eyes. I'm doing a new build in February and will probably be sticking with the NSK3480. The mP180 looks like it will be a cool, quiet case, but it achieves this in part by going against one of the primary benefits of the mATX form factor: size.
I agree with C Zoui. Its very big for a mATX case, and very expensive. Performance freaks that spend that kinda cash on cases dont usually go mATX.
Mini P180 is probably about the same size as the Solo/150, and other standard sized FULL atx cases. Why go from ATX to mATX if not to get a smaller computer? Thats always been the trade-off. Except now you lose expansion and gain no reduction in size.
Only people i can see that will really like it, are people that already have a P180, or were looking to get one soon, and didnt like how big it was, but still want the same case.
Mini P180 is probably about the same size as the Solo/150, and other standard sized FULL atx cases. Why go from ATX to mATX if not to get a smaller computer? Thats always been the trade-off. Except now you lose expansion and gain no reduction in size.
Only people i can see that will really like it, are people that already have a P180, or were looking to get one soon, and didnt like how big it was, but still want the same case.
The 300 is NICE. Clean design, great airflow and nothing fancy. Expected retail price of $60? SOLD. Why anyone would buy the 1200 is beyond me. Any word on when it'll be available?
M-P180... ehh... it looks acceptable in white, for some reason. I like the dual 5.25" chambers in the bottom. Two enclosed 3.5" harddrives shouldn't make much noise in that position.
M-P180... ehh... it looks acceptable in white, for some reason. I like the dual 5.25" chambers in the bottom. Two enclosed 3.5" harddrives shouldn't make much noise in that position.
It's still smaller then P182. And who cares about expansion slots anyway. In the past it meant something, but nowadays everything you need is integrated to the motherboard, so 2-3 slots is more then enough. Matx motherboards are also usually a lot cheaper then your average ATX motherboard, and they come with the added bonus of IGP. That's why I'm never going to buy another ATX sized motherboard again.Aris wrote:Why go from ATX to mATX if not to get a smaller computer? Thats always been the trade-off. Except now you lose expansion and gain no reduction in size.
Mini P182 Secret Weapon
One of the things some people miss is that if you remove the middle HDD bay, there's room for a full-length video card and it still holds 3 hard drives in the upper bay.
Sorry if some people don't like the vents on the front door, but when we made the case short, we lost a lot of air intake volume on the sides of the door that had to be made up for. We tried to make the openings stylish, but of course it won't be everybody's cup of tea.
The Signature PSU uses voltage regulator modules instead of the normal magnetic amplifiers. New technology? Not quite. It's used on motherboards to carefully control the power that your CPU and memory receives. For most everything else in the computer it's overkill, but the Signature is nothing if not quality overkill.
Sorry if some people don't like the vents on the front door, but when we made the case short, we lost a lot of air intake volume on the sides of the door that had to be made up for. We tried to make the openings stylish, but of course it won't be everybody's cup of tea.
The Signature PSU uses voltage regulator modules instead of the normal magnetic amplifiers. New technology? Not quite. It's used on motherboards to carefully control the power that your CPU and memory receives. For most everything else in the computer it's overkill, but the Signature is nothing if not quality overkill.
AntecRep already covered my imprecise language in defining the difference in the technology between a conventional PSU and the Signatures. We got Han (after a bit of good natured arm twisting) to open the PSU just for us...you probably won't see any other pics of the inside of them until MikeC gets one in-house for a review. Unfortunately once the PSU is open I'm really the wrong person to dissect the finer points. If Mike or Devon had been there they certainly would have been able to describe it in a more technically proficient manner. I went to art school...my reactions are more likely to be, "oh, shiny!" ![Wink :wink:](./images/smilies/icon_wink.gif)
As for the height of the Max..the upper portion of the case front is exactly the same as a regular fusion, so you can use that to judge. Antec doesn't list its dim's in the press info, but do call it "4U desktop height"
![Wink :wink:](./images/smilies/icon_wink.gif)
As for the height of the Max..the upper portion of the case front is exactly the same as a regular fusion, so you can use that to judge. Antec doesn't list its dim's in the press info, but do call it "4U desktop height"
-
- Posts: 2198
- Joined: Thu Feb 10, 2005 11:20 am
- Location: TN, USA
Maybe you haven't heard. IGP will be on ALL future chipsets from Nvidia and AMD/ATI.Erssa wrote:It's still smaller then P182. And who cares about expansion slots anyway. In the past it meant something, but nowadays everything you need is integrated to the motherboard, so 2-3 slots is more then enough. Matx motherboards are also usually a lot cheaper then your average ATX motherboard, and they come with the added bonus of IGP. That's why I'm never going to buy another ATX sized motherboard again.Aris wrote:Why go from ATX to mATX if not to get a smaller computer? Thats always been the trade-off. Except now you lose expansion and gain no reduction in size.
You won't have a choice about getting IGP even on high end boards.
That safe looks pretty dodgy. It might be fireproof but that doesn't help if your HDD melts inside it.
Most fireproof cases are designed to stop your paper documents from burning, but if you read the small print most don't guarantee that they will be readable afterwards. HDDs and optical media might not survive that kind of heat, and a fall (if the floor/desk/shelf collapses) would probably kill a HDD too.
Most fireproof cases are designed to stop your paper documents from burning, but if you read the small print most don't guarantee that they will be readable afterwards. HDDs and optical media might not survive that kind of heat, and a fall (if the floor/desk/shelf collapses) would probably kill a HDD too.
-
- Posts: 16
- Joined: Wed Apr 26, 2006 3:46 am
This scenario won't happen in the near future. But of course I'd like to see some proof/sources for this claim. I know AMD is bringing Fusion processors in the near future, which have graphics integrated into CPU. What would be the point in Fusion, if there's already going to be an IGP in every chipset?dhanson865 wrote:Maybe you haven't heard. IGP will be on ALL future chipsets from Nvidia and AMD/ATI.
You won't have a choice about getting IGP even on high end boards.
For nvidia: Hybrid SLI will be here within a couple of months, including IGPs in all nvidia chipsets for AMD cpus. And the next revision of intel chipsets will probably bring the same.Erssa wrote:This scenario won't happen in the near future. But of course I'd like to see some proof/sources for this claim.dhanson865 wrote:Maybe you haven't heard. IGP will be on ALL future chipsets from Nvidia and AMD/ATI.
I don't suppose there is the slightest chance of it happening but I wish they would support Hybrid SLI on SLI mobos with two PCI-e cards as well. I'm not sure what the lowest SLI capable card is, but the 6600 at least supports it and can be found in fanless versions. Compared to the 8800 power consumption is excellent.
-
- Posts: 2198
- Joined: Thu Feb 10, 2005 11:20 am
- Location: TN, USA
Au contraire, the very next refresh on both sides of the fence are going that way. It'll only take a few months to debut, a few more months to fill the channel, and a few months after that for prior generation products to empty out of the channel. In the grand scheme of life it is going to happen shortly.Erssa wrote:This scenario won't happen in the near future. But of course I'd like to see some proof/sources for this claim. I know AMD is bringing Fusion processors in the near future, which have graphics integrated into CPU. What would be the point in Fusion, if there's already going to be an IGP in every chipset?dhanson865 wrote:Maybe you haven't heard. IGP will be on ALL future chipsets from Nvidia and AMD/ATI.
You won't have a choice about getting IGP even on high end boards.
If you think months are a long period of time you might say that isn't near future. I'd say it's roadmapped in and inevitable.
Wait a second you think Fusion is a near future project?
The point of Fusion/APU is low latency. Once you have Crossfire/SLI concepts fully developed there is no where near the drawback of an on CPU video controller like there was back in the early Celeron days.APU stands for Accelerated Processing Unit, and the first one is Swift. You might have heard of it earlier as Fusion, and it is set to come out in the latter half of 2009. What it is, is a 'stars' core with the new northbridge from Griffin, a GPU and PCIe on board. Basically, it is a system on a chip, but unlike other SoCs, it is aimed at the high end, not the low.
I expect to see IGP across the board before fusion makes it to the masses.Timna was the codename of a proposed Processor Family by Intel. The Project was announced in 1990 and was designed in Haifa, Isreal. It was supposed to be the first Processor with an Integrated GPU and Memory controller which was designed to work with RDRAM. The price of RDRAM did not drop as expected by Intel. So, It was decided to use a Bridge chip - Memory Translator Hub(MTH) and link Timna with SDRAM. Later, a serious Defect was discovered in the Design of the MTH and so had to be recalled. The MTH was rebuilt again but problems still remained. Timna was canceled on 29 September 2000.
I don't bookmark these sorts of things as I read them but here are two links.
http://www.dailytech.com/All+New+NVIDIA ... e10263.htm
http://www.anandtech.com/tradeshows/showdoc.aspx?i=3193
In the past enthusiast boards had chipsets that had the integrated GPU disabled just to keep it out of the way. Now the drivers and board level control will be there to use an IGP in a constructive manner no matter how many add in GPUs you have.
Use it for power saving, SLI/Crossfire, Physics, distributed processing. In some way or another most any user will find a use for it even if they don't know it is there.
Another issue I can see with wireless charging is that no-one can ever seem to agree on a standard.
It would be really easy to make a universal wired charger if everyone just used the same charging jacks. About the closest we have come is USB for charging, but most devices have their own proprietary connectors.
I suppose you could argue it's down to different voltage requirements, but it wouldn't be hard to produce a connector that supplies 3.3V and 5V. Or just 5V like USB, and then regulate it in the device.
So, instead of a wireless charging pad, you will just end up with the usual array of docks and pads, and still need 20 wall sockets for them all.
It would be really easy to make a universal wired charger if everyone just used the same charging jacks. About the closest we have come is USB for charging, but most devices have their own proprietary connectors.
I suppose you could argue it's down to different voltage requirements, but it wouldn't be hard to produce a connector that supplies 3.3V and 5V. Or just 5V like USB, and then regulate it in the device.
So, instead of a wireless charging pad, you will just end up with the usual array of docks and pads, and still need 20 wall sockets for them all.
i can't wait for the mini p180 to hit the shops, it's exactly what i've been looking for !
my current PC setup with mATX makes so much noise i can't stand it anymore and i've been looking for a nice quiet case for it. i was about to buy the p182 anyway even though it was too big/heavy for my needs. now i can get a mini p180
i was just wondering if the side panels etc were made like that p180/2 ie multi-layered ?
(and a 200m fan in the top, the p180/2 only have 120mm fans don't they ?)
my current PC setup with mATX makes so much noise i can't stand it anymore and i've been looking for a nice quiet case for it. i was about to buy the p182 anyway even though it was too big/heavy for my needs. now i can get a mini p180
![Very Happy :D](./images/smilies/icon_biggrin.gif)
i was just wondering if the side panels etc were made like that p180/2 ie multi-layered ?
(and a 200m fan in the top, the p180/2 only have 120mm fans don't they ?)
Antec NSK 3480nazgoth wrote:i can't wait for the mini p180 to hit the shops, it's exactly what i've been looking for !
my current PC setup with mATX makes so much noise i can't stand it anymore and i've been looking for a nice quiet case for it. i was about to buy the p182 anyway even though it was too big/heavy for my needs. now i can get a mini p180![]()
i was just wondering if the side panels etc were made like that p180/2 ie multi-layered ?
(and a 200m fan in the top, the p180/2 only have 120mm fans don't they ?)
I have to agree with most of the other posters in that the mP180 is going for a niche market. I was motivated by size and cost in my purchase of a 3480 about 5 months ago. I'd probably make the same choice today.
One thing that did surprise me is the rigid hard drive mounting that they have in the Three Hundred. Just how rigid is it? Do they at least have the soft grommets found in the 3000B's HDD mounting system? A completely rigid hard drive mount seems like a step back for Antec, even if it costs $60.
One thing that did surprise me is the rigid hard drive mounting that they have in the Three Hundred. Just how rigid is it? Do they at least have the soft grommets found in the 3000B's HDD mounting system? A completely rigid hard drive mount seems like a step back for Antec, even if it costs $60.
I rate silence more important than size (even though i would prefer a mATX sized case) and from what i read about the 3480 in the review of it on this site it doesn't quite cut it. I was really looking for the better noise dampening of the p180/2 and (about) the size of the 3480. I know the mini p180 will probably be the size of a normal midi tower but that doesn't bother me that much.Aris wrote:Antec NSK 3480nazgoth wrote:i can't wait for the mini p180 to hit the shops, it's exactly what i've been looking for !
my current PC setup with mATX makes so much noise i can't stand it anymore and i've been looking for a nice quiet case for it. i was about to buy the p182 anyway even though it was too big/heavy for my needs. now i can get a mini p180![]()
i was just wondering if the side panels etc were made like that p180/2 ie multi-layered ?
(and a 200m fan in the top, the p180/2 only have 120mm fans don't they ?)