WOW! I knew it was going to be a small number, but 0.1%?!?! My, my, my... that's really a shame. It truly does say something great about that 0.1%, though, just as Mike said!jammin wrote:0.1% is quite small, I'm sure we can do better guys!
Make SPCR Even Better... and Win Great Prizes!
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
May be that I was hoping to see my own dreams being supported this way in the far future while donating... Nevertheless, I'm glad for being able to help, albeit by a small amount. It's a great site that I always enjoy revisiting. Rising the bar even higher is the only way to go for the true professionals - happy to see you doing it!
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Prizes for the May 1 draw listed:
Our corporate sponsors have generously stepped up to the plate and offered great prizes for supporters of the Make SPCR Better in 2008 project. Each $25 contribution in the period 16 April to 30 April will give you one entry into a free draw to win from these prizes:
- Corsair TX650W 650W PSU
- Corsair Survivor 16GB USB drive
- Corsair XMS2 DHX DDR2 PC2-6400 4GB kit
- Intel E7200 Core 2 Duo processors (3 units!)
- Seasonic Eco 300 power supply (3 units!)
- Seasonic S12II-430 power supply
- Seasonic M12-700 power supply
- Seasonic M12II-500 power supply
- Antec MX-1 external HDD enclosure (3 units!)
- Antec P182 Advanced Super Mid Tower case
There are 16 prizes with a net market value of approximately $1500. Contribute at least $25 for a chance to win now!
-
- Friend of SPCR
- Posts: 356
- Joined: Wed Jan 16, 2008 8:56 pm
- Location: Council Bluffs, Iowa
- Contact:
Are donations being linked to forum usernames at all? Since the email addresses used on PayPal and on the forums might not be the same, this could be interesting (though I believe mine are the same, so I'm not sure why I'm even asking).
Anyway, I'm poor and can't do much, but I threw in my $25. Keep up the good work!
Anyway, I'm poor and can't do much, but I threw in my $25. Keep up the good work!
When you click on the "Profile" link at the top of SPCR, under the two banner ads, does it show the email address there that you plan to donate with? I noticed Mike had no trouble associating my email address with my forum name (although in my case, use of my first name probably helps anyway) but I figured that since my email address is in my profile, that is what confirms it.tehcrazybob wrote:Are donations being linked to forum usernames at all? Since the email addresses used on PayPal and on the forums might not be the same, this could be interesting (though I believe mine are the same, so I'm not sure why I'm even asking).
Anyway, I'm poor and can't do much, but I threw in my $25. Keep up the good work!
-
- *Lifetime Patron*
- Posts: 618
- Joined: Mon May 23, 2005 7:05 am
- Location: State College, PA
that's a good point - my Paypal email is different to my SPCR email. Oh welltehcrazybob wrote:Are donations being linked to forum usernames at all? Since the email addresses used on PayPal and on the forums might not be the same, this could be interesting (though I believe mine are the same, so I'm not sure why I'm even asking).
-
- Friend of SPCR
- Posts: 356
- Joined: Wed Jan 16, 2008 8:56 pm
- Location: Council Bluffs, Iowa
- Contact:
-
- Patron of SPCR
- Posts: 744
- Joined: Tue Mar 04, 2008 4:05 am
- Location: London
- Contact:
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
FYI, the original post was updated. Yesterday was a banner day, we hit nearly $1000 with 24 contributors! Listing the prizes must have had an effect... or maybe it's just that this draw date is looming. Whatever the reasons, we're actually half way there. "One step at a time..."
NOTE: The results of this random draw will be announced here at 9AM Pacific time on May 1. Emails will be sent to winners within 24 hours after that in order to arrange delivery details.
BTW, Canadians are now fairly represented, and Americans have higher representation than their geostat proportion of site visitors.29 April: After 12 days, 85 individuals have contributed a total of $4473, and the single largest contribution was $700 thus far. One supplier has offered a discount of $600, so if this amount is added, the total raised is $5073, which is HALF the way to our goal. Our current average rate is $373/day; if this rate is maintained, we'll reach our goal in 18 more days.
All contributors should consider themselves the cream of the SPCR community: You represent just 0.1% of the total number of unique visitors to SPCR in the last 12 days.
Much thanks to all who contributed, and good luck in the draw!
As for the remaining 99.9%, at least give yourself a great chance to win some prizes (currently around 1 in 4 will win) and move into that select group in the SPCR community -- contribute now!
NOTE: The results of this random draw will be announced here at 9AM Pacific time on May 1. Emails will be sent to winners within 24 hours after that in order to arrange delivery details.
I know what that's like. Being in a little studio apartment my PVR is only a few feet from my head when I sleep at night. My friends have turned it off by accident thinking they were turning it on!gb115b wrote:wow looks to be going really well! interestign demographics for the contributions as well...maybe it's because we have smaller houses in england so we always have computers in our bedrooms / lounges that need silencing! (i speak from experience of living in a number of pokey london flats!)
Mike, I sent more of them duckets your way because I love this site so much.
Speaking of heat - it occurred to me to wonder. If this room won't have ventilation, how will you control the temperature while testing? Or are the test runs short enough that even a beefy PSU won't heat the room much.scdr wrote: ...
"Neither snow, nor rain, nor heat, nor gloom of night will stay these courageous reviewers from the swift completion of their appointed rounds"
- (with appologies to Herodotus)
(I know, the build details will come in future articles ...)
-
- *Lifetime Patron*
- Posts: 2
- Joined: Sat Feb 24, 2007 8:00 am
- Location: Stockholm, Sweden
-
- Friend of SPCR
- Posts: 279
- Joined: Sun May 06, 2007 10:37 am
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Thank you!Telamon wrote:Mike, I sent more of them duckets your way because I love this site so much.
Daily update of original post:
Stats note: Most countries seen in the geostats for visitor traffic to SPCR are now reflected in the contributors. The absence of Asian nations may be a reflection of weak Paypal reach in that region.30 April: We're making great progress! After 13 days, 104 individuals have contributed a total of $5198, and the single largest contribution was $700 thus far. One supplier has offered a discount of $600, so if this amount is added, the total raised is $5798, which is well over halfway to our goal. Our current average rate is $400/day; if this rate is maintained, we'll reach our goal in just 11 more days.
All contributors should consider themselves the cream of the SPCR community: You represent just 0.1% of the total number of unique visitors to SPCR in the last 13 days.
Much thanks to all who contributed, and good luck in the draw!
As for the remaining 99.9%, at least give yourself a great chance to win some prizes (currently around 1 in 6 will win) and move into that select group in the SPCR community -- contribute now!
-
- Friend of SPCR
- Posts: 14
- Joined: Wed Jan 16, 2008 2:17 am
- Location: Norway
i was under the impression that the sound room would only be used for noise level measurements and recordings, and the stress testing , temperature measurements etc would all be done in a different labscdr wrote:Speaking of heat - it occurred to me to wonder. If this room won't have ventilation, how will you control the temperature while testing? Or are the test runs short enough that even a beefy PSU won't heat the room much.
(I know, the build details will come in future articles ...)
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
In general, you're right, wim. There's no compelling reason to do both thermal and acoustic testing in the chamber... except maybe in the case of load/heat sensitive fans in complete systems. Then we'd have to establish basic guidelines. This could be easily done tho -- leave the door to the chamber open during the stress testing to ensure reasonable air circulation and close it only when we're wanted to record/measure a change in the noise -- which we'll listen for.wim wrote:i was under the impression that the sound room would only be used for noise level measurements and recordings, and the stress testing , temperature measurements etc would all be done in a different labscdr wrote:Speaking of heat - it occurred to me to wonder. If this room won't have ventilation, how will you control the temperature while testing? Or are the test runs short enough that even a beefy PSU won't heat the room much.
(I know, the build details will come in future articles ...)
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Congratulations to the Winners of the April 14~30 Giveaway Draw!
Great thanks to all the contributors who help to raise nearly $6000 towards this project so far; you are all winners in my book!
- Corsair TX650W 650W PSU - Brandon F.
- Corsair Survivor 16GB USB drive - Colin J.
- Corsair XMS2 DHX DDR2 PC2-6400 4GB kit - John L.
- Intel E7200 Core 2 Duo - Ray L.
- Intel E7200 Core 2 Duo - John J.
- Intel E7200 Core 2 Duo - Timothy B.
- Seasonic Eco 300 power supply - Terence A.
- Seasonic Eco 300 power supply - Jon P.
- Seasonic Eco 300 power supply - Jason T.
- Seasonic Eco 300 power supply - Conroy L.
- Seasonic S12II-430 power supply - Fredrik M.
- Seasonic S12II-330 power supply - Steve L.
- Seasonic M12-700 power supply - adrian t.
- Seasonic M12II-500 power supply - James P.
- Antec MX-1 external HDD enclosure - carl b.
- Antec MX-1 external HDD enclosure - Bruce L.
- Antec MX-1 external HDD enclosure - Alan S.
- Antec P182 Advanced Super Mid Tower case - Amy H.
Great thanks to all the contributors who help to raise nearly $6000 towards this project so far; you are all winners in my book!
Last edited by MikeC on Thu May 01, 2008 10:21 am, edited 1 time in total.
Congratulations to the winners! Wish I had been in the contest, but, oh well.
Also wanted to say that seeing the companies who donated, it makes me proud to own some of their products and really makes me want to continue buying their awesome products!
Mike, just for clarification, you mentioned "corporate sponsors". Were these products donated by the manufacturers or by vendors? I just want to ensure I'm giving my respect to the proper companies!
Also wanted to say that seeing the companies who donated, it makes me proud to own some of their products and really makes me want to continue buying their awesome products!
Mike, just for clarification, you mentioned "corporate sponsors". Were these products donated by the manufacturers or by vendors? I just want to ensure I'm giving my respect to the proper companies!
-
- *Lifetime Patron*
- Posts: 368
- Joined: Fri Jul 23, 2004 11:33 am
- Location: King of Prussia, PA
Perhaps reason for another upgrade down the line but...MikeC wrote:This could be easily done tho -- leave the door to the chamber open during the stress testing to ensure reasonable air circulation and close it only when we're wanted to record/measure a change in the noise -- which we'll listen for.
You could always run chilled water through pipes under a sub-floor to allow for cooling of the room to a reasonable (23-25C or 73-77 F) level. Not sure how much that would cost though, but I'm sure by placing the cooling unit far away and running the pipes would not hamper the sound readings as much as an open door.
Obviously I've gone overboard with the upgrade project!!!!
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
The vendors.Skirge01 wrote:Mike, just for clarification, you mentioned "corporate sponsors". Were these products donated by the manufacturers or by vendors? I just want to ensure I'm giving my respect to the proper companies!
Actually, some of the requests I made to potential sponsors were being answered positively only in the last day or two. As a result, these prizes were not included in this morning's draw. So it looks like there will be enough products from sponsors to run yet another giveaway draw to keep encouraging contributions for this project!
Look for full details in the next day or two.... and you can rest assured that any contributions made after the last draw will be included in the next.
FYI, one of the new audio tools has already been purchased: The full version of SpectraPLUS, whose site you'll see advertised on a banner on the main site, and listed among the sponsors. This Audio real time analyzer can be used with any reasonable PC, plus good sound card and mic -- the latter items are key. I've only just begun exploring it in full detail over the past few hours, hooked up to the existing silenced Shuttle PC + MAudio Firewire 410 + Sennheiser ME66 mic... but it's already quite closely calibrated against the B&K SLM (about a dB or better in the 20~30 dBA range), and I'm only scratching at the sheer range of functions offered. SpectraPLUS starts at just $300 for the basic package btw.
-
- *Lifetime Patron*
- Posts: 618
- Joined: Mon May 23, 2005 7:05 am
- Location: State College, PA
congrats to the winners and bugger I haven't won again in equal measure! One day, one day
Keep up with the updates Mike, it's fascinating to watch these projects develop. A photo blog a la Anand Home theatre thing would be a good idea too - people are always more likely to contribute if they see how their money's being put to use.
Keep up with the updates Mike, it's fascinating to watch these projects develop. A photo blog a la Anand Home theatre thing would be a good idea too - people are always more likely to contribute if they see how their money's being put to use.