It is currently Tue Nov 25, 2014 10:47 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Multiple systems in one P180 case
PostPosted: Mon Sep 22, 2008 6:49 am 
Offline

Joined: Tue Nov 20, 2007 5:08 am
Posts: 70
Location: Montreal
Having an itch you can't scratch is like wanting to build a system without having a need for yet another one. I have been considering getting an Antec P180 or 900 for a while now. I decided on the P180 with the plan to build 3 systems in the same case.

I removed the top drive cage which is to hold 2 hdd's or used as an air duct for a 120mm fan.

1st system:
I made a motherboard tray out of MDF and installed it instead of the hdd cage. I used my Intel D201GLY2 which is a mini-itx mobo for my print server, fax server, file server system. Since this system uses a power brick, there was no need to install a 2nd ATX power supply in the case.

2nd system:
I installed my ASRock Conroe1333-D667 in the traditional place and used a Coolermaster 550 watt psu even though it's overkill ... for now.

Wiring:
I used the reset button on the case as the power switch for the 1st system along with a hdd led.
I ran the leads from my KVM through an open PCI cover at the rear and the rest of the cables for this system through the grommets in the back. Since this system is on 24/7, I connected the rear 120mm fan to this system for air flow.

The 2nd system is wired standard and the two other 1200mm fan are running off the Coolermaster.

Hard drives:
I have 4 hdd's installed in the hdd cage at the bottom of the case. One 500GB for the server system 1 and 3 others attached to the ASRock mobo.

I found that there are some areas in the case which are sharp like around the power supply area. I also found the connectors on the 120mm fan provided were kind of cheap and I actually broke one of them. However, I really like the quality of this case.

The 3rd system ... well I do have a plan to add it later. I foresee using a M-ATX mobo and mounting in front of the ASRock board. Since this ASRock has no pci or video card installed, there is room to add it. Also, the power requirements of a M-ATX mobo, celeron D 4xx series cpu, hdd and dvd drive is only about 115 watts. A small power supply will be needed, along with some better cable management to pull it off.

Image

Image

_________________
Motherboard: Intel D201GLY2|RAM: 1GB Crucial Rendition PC2-5300 DDR2-667|Hard Drive: 320GB WD SATA|Power supply: PICO-120 & 110w brick|Used as fax server, file server and print server 24/7 using XP Pro


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 22, 2008 7:25 am 
Offline

Joined: Sat Aug 23, 2008 1:20 am
Posts: 120
Location: Denmark
Sweet! I've been considering the same thing, I live in a flat and I don't care for yet another case. Neat to see there's room for a mini-ITX in the P180! :D And also a very nice solution cable-wise; I'd have thought you'd need one of those huge Lian Li cases with dual power supplies, but if you can run off of a power brick that's not necessary.

I don't see "the two other 1200mm fans" you mention, though. :shock: Perhaps they're external?

_________________
KlaymenDK
-- 010\001\111 --
This is my rig, and how I chose it (2008-12).


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 22, 2008 1:38 pm 
Offline
Friend of SPCR

Joined: Sat Dec 06, 2003 5:56 pm
Posts: 793
Location: Boston, MA
cool hack

_________________
Phenom II 555 (3 cores unlocked) 1.275v - 4GB - Xigmatek 1293 Cooler - WD 64 GB SSD -CM Mystique - Antec NeoHE 550 - Saphire 6870
e6300 - 2 GB DDR - P180 - Scythe Mine - Samsung 400 GB - 3 120mm fans
imac 7,1 C2D 2.0, 3 GB 250GB.
macbook C2D 2.4 3 GB 320GB Samsung M7E


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 22, 2008 2:41 pm 
Offline

Joined: Tue Nov 20, 2007 5:08 am
Posts: 70
Location: Montreal
KlaymenDK wrote:
I don't see "the two other 1200mm fans" you mention, though. :shock: Perhaps they're external?


1200 mm was a typo :lol:

There are three 120 mm fans that come with this case. One on top, 2nd at the rear and the 3rd mounted in the bottom chamber about two inches before the power supply. All fans have a fan controller with 3 speeds.

_________________
Motherboard: Intel D201GLY2|RAM: 1GB Crucial Rendition PC2-5300 DDR2-667|Hard Drive: 320GB WD SATA|Power supply: PICO-120 & 110w brick|Used as fax server, file server and print server 24/7 using XP Pro


Top
 Profile  
 
 Post subject:
PostPosted: Sun Sep 28, 2008 11:44 am 
Offline

Joined: Sun Nov 30, 2003 8:01 pm
Posts: 90
Location: Poland
Impersive build. I'm cooking up (very slowly) something similar. But its still in the planning phase.

I have one recomendation.

The ITX board, you could run it of a PICO PSU connected to 12V of the main power supply ;)

I expermited with this connecting a mATX with an AMD 3600X2, generaly functioned OK. But again, with life there is no guarantie, so be carefull.

_________________
Prime1 = Phenom II x4 810 (120 U Ext) : 2x2gb KingMax : AM2 760G Asus) : ATI 4670 : Gigabyte I-RAM 4GB : WD 1TB
Node1 = Phenom x4 9150e (stock) : 2gb KingMax : ASUS M2A-MX : to net boot from P-Node
Soon Node2 and Node3 similar to Node1


Top
 Profile  
 
 Post subject:
PostPosted: Thu Oct 02, 2008 12:46 pm 
Offline

Joined: Tue Nov 20, 2007 5:08 am
Posts: 70
Location: Montreal
prodeous wrote:
The ITX board, you could run it of a PICO PSU connected to 12V of the main power supply ;)


That might be worth exploring ...

_________________
Motherboard: Intel D201GLY2|RAM: 1GB Crucial Rendition PC2-5300 DDR2-667|Hard Drive: 320GB WD SATA|Power supply: PICO-120 & 110w brick|Used as fax server, file server and print server 24/7 using XP Pro


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group