Hi...im new here!!
<br>Well...i've buyed a new ENERMAX EG-365 VE for my ATHLON 2000XP mounted on a ASUS A7M266.
<br>I want to know where i must to wire the 3 pin connector (seems like an ATX 12V connector) that came from the powersupply.That connector its attached to a thing that seems a led (i suppose that is the thermistor).
<br>Well second question...i must to put the thermistor into the power supply?
<br>Please let me know a don't know where to wire that XXXXX connector on my A7M!!!!
<br>Thanx a lot....
<br>
<br><!-- BBCode auto-link start --><a href="http://www.kwild.com" target="_blank">http://www.kwild.com</a><!-- BBCode auto-link end -->
<br>
<br>
<br>
Infoz needed 4 a new ENERMAX EG-365 VE
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Sounds like you've got one of the earlier models with an external fan control thermistor that can be located anywhere -- within reach of the cable, anyway. Inner or outer fan or both - don't know which it controls. If you want the fan to go slow, put it in a cool spot; or put it next to the CPU/HS if you want the fan to run fast. Does the 3-pin cable look like a fan connector (like from your CPU HS fan)? If so, it's probably for fan speed monitoring & goes into a PSU or case fan header. Didn't you get a manual?
[addsig]
[addsig]
Yes,the 3 pin cable is the same of my heatsink (a zalmann flowercooler) but it's colored in brown with the wires colored in yellow.
<br>The manual don't says a **** about that connector and about the thermistor (and nothing about the silent or normal mode...).
<br>Still waiting for infoz...thanx mate!
<br>;O)
<br>
<br>
<br>The manual don't says a **** about that connector and about the thermistor (and nothing about the silent or normal mode...).
<br>Still waiting for infoz...thanx mate!
<br>;O)
<br>
<br>