It is currently Thu Apr 24, 2014 8:43 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 38 posts ]  Go to page Previous  1, 2
Author Message
 Post subject:
PostPosted: Wed Jul 15, 2009 9:10 pm 
Offline

Joined: Thu Sep 07, 2006 11:20 pm
Posts: 859
Location: Poland
It's OK, my both HDDs are in 2.5" SQDs and seat neatly on trays - no real difference here in terms of vibration damping. Given the quickly dropping prices of SSDs I don't suppose I'll need elastic band or rubber grommets any time soon, for that matter ;)


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 16, 2009 7:44 am 
Offline

Joined: Wed Oct 22, 2008 8:49 am
Posts: 454
Location: Where I Am
jimmyzaas wrote:
It seems to me like Antec is just corner cutting. Their cases used to be built like tanks. My SX1030, although loud, was just a solid piece of work. These new ones they are producing seem flimsy in comparison.

Could not agree with you more. I still use a 1080AMG tower -- a later production line of SX1030 -- and it is indeed tanklike. Six years in use, and apart from a few scratches, it looks almost brand new to this day. I don't have to baby it either as you have to with their newer cases. I know I can get stuck into Antec sometimes, but that doesn't mean I don't like them or their cases. I do. It just doesn't extend to fanboyism. Hopefully they will hear their customers and fix some of these issues in their future products.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 18, 2009 12:16 am 
Offline

Joined: Mon Jan 24, 2005 1:58 am
Posts: 27
lol yeah my main pc is still in an antec sx1040 which i got about 7 years ago and nothng has ever broken on it. it uses 1.0mm thick steel i think the antecs these days are 0.8mm


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 18, 2009 12:52 am 
Offline

Joined: Thu Sep 07, 2006 11:20 pm
Posts: 859
Location: Poland
Some are 0.8 (NSK), but most are 1 mm. Anyhoo, it's not the steel most ppl are complaining on, but rather things like plastic buttons, rubber bands for hdd etc. Still tho, even cheapest Antecs are better quality than generic cases or cheapo cases with big brand names, such as Gigabyte or Asus.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 18, 2009 8:55 am 
Offline

Joined: Wed Oct 22, 2008 8:49 am
Posts: 454
Location: Where I Am
I agree with the previous post. Antec are still streets ahead of the competition for the quality of steel used, even compared to the so called big name brands. 1mm makes for quite a sturdy case. The 0.8mm on their NSK is a let down, but still better than the 0.5-0.6mm on many other cases in the same price bracket. The P18x is 0.8mm because it's a composite of alumimium and plastic; it's not a sign of poorer quality, however it's flexible and can possibly warp. One thing that annoys me with Antec's steel as of late is the surprising sharp edges throughout. Coming from an 1080AMG which never gave me a single reason to fear getting cut, the Solo gave me a shock with its number of sharp and graze causing edges.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 18, 2009 9:12 am 
Offline

Joined: Tue Jul 07, 2009 7:25 pm
Posts: 86
Location: England
I'm pleased with my Solo case in all other respects though. The gloss black finish looks excellent for a mass-produced item at that cost.

The hard drive suspension elastics don't look very substantial, so I'll be keeping an eye on those - or maybe make some stronger ones.

:)


Top
 Profile  
 
 Post subject: Re: Antec Solo....BROKEN POWER and RESET BUTTONS!!
PostPosted: Fri Apr 04, 2014 8:01 am 
Offline
SPCR News Editor

Joined: Thu Feb 10, 2005 11:20 am
Posts: 2161
Location: TN, USA
OK, there have been dozens of threads on this topic but I didn't see a better one to necro so here we are.

I bought a Solo in Nov 2006 (7.5 years ago). I got a replacement power switch in May 2009 (when the case was 2.5 years old) and today the power button broke again (after 5 years of use).

I suppose it says something positive about the design of the case that I'd rather replace the power button than get a new case. Or maybe it's just because I don't want to toss all this processed material in a landfill somewhere.

As is, If I take the front cover off the PC I can use the power button but now I have two drive bays exposed (lack of noise deflection/absorption and airflow changes). That's ignoring the cosmetic difference the front cover makes.

So I'm waiting for Antec support to come in for the day so I can see if I can buy a new front cover.

edit: they don't have the old face in stock now, but you can buy http://store.antec.com/Catalog/ProductD ... 45-30133-6 and it will fit (and they have it with other color trims)

as a short term fix I have moved the power switch to hang out the rear of the case. It's a raw switch so it isn't pretty or comfortable to push but it works and I have the front cover back on.

_________________
.
Please put a country in your profile if you haven't already.
This site is international but I'll assume you are in the US if you don't tell me otherwise.


Top
 Profile  
 
 Post subject: Re: Antec Solo....BROKEN POWER and RESET BUTTONS!!
PostPosted: Wed Apr 23, 2014 7:36 am 
Offline

Joined: Wed Oct 13, 2004 4:03 pm
Posts: 604
Location: Albany, GA USA
After many years of using my Antec Solo the power button broke. I'm sure that if I spent a bit of effort I could rig a repair. Why bother? I just removed the button and power on the PC by sticking a finger through the button hole to the switch.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 38 posts ]  Go to page Previous  1, 2

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group