Powercolor GO! Green HD5750 (passive)

They make noise, too.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

frenchie
Friend of SPCR
Posts: 1346
Joined: Tue Jul 08, 2008 4:53 am
Location: CT

Powercolor GO! Green HD5750 (passive)

Post by frenchie » Wed Jan 06, 2010 3:59 am

Passive HD5750 by powercolor : http://www.powercolor.com/global/produc ... cification

Extract :
[quote]As the industry-first unplugged HD5000 series, PowerColor Go! Green HD5750 takes advantage of its unique “Efficient Energy Transforming Technologyâ€
Last edited by frenchie on Mon Apr 19, 2010 10:07 am, edited 2 times in total.

danimal
Posts: 734
Joined: Mon Jun 08, 2009 2:41 pm
Location: the ether

Post by danimal » Wed Jan 06, 2010 5:22 pm

is that video card any different than the current powercolor fanless 5750? it looks like the same cooler.

rpsgc
Friend of SPCR
Posts: 1630
Joined: Tue Oct 05, 2004 1:59 am
Location: Portugal

Post by rpsgc » Thu Jan 07, 2010 4:13 am

danimal wrote:is that video card any different than the current powercolor fanless 5750? it looks like the same cooler.
"Power Color Go! Green HD5750 consumes 21% less power than reference board."

Only difference, that and the price of course.

Ramses
Friend of SPCR
Posts: 34
Joined: Mon Jul 14, 2003 4:20 pm
Location: Montréal

Post by Ramses » Thu Jan 07, 2010 12:21 pm

I'm guessing they removed the need for the 6-pin PCIe power connector?

lechuck
Posts: 86
Joined: Mon Dec 04, 2006 11:57 pm
Location: EU

Post by lechuck » Thu Jan 07, 2010 1:59 pm

This card was rumored last monht, it's without power connector.
From design point of view, I'd rather see that HS goes to the back of the card, something like HR03. I think this is better for most cases of passive use, as the heat goes up and does not hang below the card.

More interesting to me is saying how they kept power down... and brings me back memories at 4670 launch, where review cards had so much better power consumption compared to retail cards. At last something is moving.

Audiodude
Posts: 43
Joined: Mon Mar 23, 2009 7:02 am
Location: Earth

Post by Audiodude » Sat Jan 09, 2010 6:42 pm

Lower voltages in combination with selected GPUs and a simpler (less parts) voltage regulation i'd guess.

greetz Audiodude

kvik
Posts: 11
Joined: Sun Nov 08, 2009 3:42 pm
Location: Copenhagen, Denmark

Post by kvik » Sat Jan 16, 2010 6:16 pm

As far as I remember, the first fanless Powercolor 5750 that came out, used a lot more power than the reference 5750's.

Does anyone know for a fact, that their Go Green edition uses as little power as the reference, or even less? If so, I'll purchase it right away.

readk
Posts: 58
Joined: Tue Jan 02, 2007 11:10 am

Post by readk » Thu Jan 21, 2010 12:42 pm

kvik wrote:As far as I remember, the first fanless Powercolor 5750 that came out, used a lot more power than the reference 5750's.

Does anyone know for a fact, that their Go Green edition uses as little power as the reference, or even less? If so, I'll purchase it right away.
I couldn't find this in stores, I wanted it so badly.

I went with the powercolor 5750 fanless (non-green) and it doesn't use that much juice. I'd say between idle and Furmark-loaded it changes about 60 watts on my Kill-a-watt.

But the green one doesn't have a power plug and so it definitely will use less.

grnarrow
Friend of SPCR
Posts: 60
Joined: Fri May 30, 2003 3:48 pm
Location: FL, US

Post by grnarrow » Tue Jan 26, 2010 10:58 am

This site has some photos of the card. I can't wait until there's a review, hopefully from spcr!

flapane
Posts: 257
Joined: Fri Dec 19, 2008 2:55 am
Location: Naples, Italy
Contact:

Post by flapane » Tue Jan 26, 2010 2:04 pm

Am I wrong or all these 5750 are like ghosts?
I've never seen one of'em here in Italy, nor on the web. :(

_MarcoM_
Posts: 294
Joined: Thu Jul 21, 2005 11:58 am

Post by _MarcoM_ » Tue Jan 26, 2010 2:08 pm

In Italy there is runstore.it who sell the Powercolor and the Club3D, but not the "green" one :roll:

dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

Post by dhanson865 » Tue Jan 26, 2010 2:36 pm

This card was discussed in another thread viewtopic.php?p=494520

I still haven't found one for sale.

http://www.powercolor.com/Global/produc ... uctID=6838 shows specs and part number

PowerColor Go! Green HD5750 1GB GDDR5 AX5750 1GBD5-NS3DH

kvik
Posts: 11
Joined: Sun Nov 08, 2009 3:42 pm
Location: Copenhagen, Denmark

Post by kvik » Wed Jan 27, 2010 4:54 pm

According to the danish importers, we won't see the card here in Q1.

WARDOZER9
Posts: 121
Joined: Thu Jan 28, 2010 7:41 am
Location: Rockford, IL ( USA )

Post by WARDOZER9 » Thu Jan 28, 2010 5:59 pm

I'm extatic that someone finally makes an EE 5750 but still waiting for the single-slot 5750 EE to replace my XFX 9800GT EE with it's 66w board power. By single-slot I don't mean the HSF as I don't mind hacking up the side of my shuttle as I have extra covers but I just want a single pci bracket with a DVI, HDMI and DP.

Anyways, thanks for getting my hopes up by making me think I can retire my 9800GT OP =.=

===EDIT===

Ooh, I just noticed the PCB provision for a 6-pin PCi-E connector, good for modding one on should someone ever want to OC the card :)

sampo
Posts: 41
Joined: Tue Apr 28, 2009 1:56 am
Location: Finland

Post by sampo » Wed Feb 10, 2010 8:50 am

Finally available for preorder in EU.

http://geizhals.at/eu/a496815.html

Price is currently a bit steep, 35 euros more than non green passive 5750.

madshi
Posts: 11
Joined: Mon Jul 12, 2004 7:35 am
Location: Germany
Contact:

Post by madshi » Tue Feb 16, 2010 9:45 am

In stock in some german shops as of today.

grnarrow
Friend of SPCR
Posts: 60
Joined: Fri May 30, 2003 3:48 pm
Location: FL, US

Post by grnarrow » Thu Feb 18, 2010 8:56 am

One Canadian site is listing it for sale now, backordered, for $180cad.
http://www1.ncix.com/products/index.php ... PowerColor

Come on newegg!

TechBari
Posts: 4
Joined: Mon Feb 08, 2010 12:20 pm
Location: Toronto, Ontario, Canada

Post by TechBari » Fri Feb 19, 2010 5:45 pm

Yes NCIX has it advertised the PowerColor Go! Green HD5750 1GB GDDR5 aka AX5750 1GBD5-NS3DH for $180, so I guess we can expect shipment shortly. I myself personally am trying to keep this card under wraps, because I wonder about the demand. To my knowledge it's the fastest card available with passive cooling, assumably working under 75 W, bitstream and passive and everything else that a 5000 series graphics cards would bring. As much as others are suggesting that the 5650 would be the perfect HTCP graphics card, I believe this card has the potential to be the best.

However, I have a couple of concerns. First ATI has not yet demonstrates that there graphics cards driver can handle Bitstream audio without any difficulty and ATI is not known for great drivers in the first place and particularly with regard to there are 5000 series graphics cards and more particularly with regard to bitstream.

See the expert's advice, and let's all pressed ATI for drivers to properly support the features that they advertise on their graphics cards, ie Bitstream, see below

avsforum*com/avs-vb/showthread.php?t=1224697

Secondly: I really wonder if this card can live up to its expectations; that is to say that it can rival stock 5750 ATI cards in terms of performance. I guess before purchasing I would really like to see a comparison between this card and say Sapphire Radeon HD 5770 Vapor-X Video Card both in terms of performance, temperature and noise levels. Granted PowerColor Go! Green HD5750 1GB GDDR5 is a passive card and one would expect no noise, but it's difficult to know whether or not the Sapphire Radeon HD 5750 Vapor-X Card (for example), can compete to a passive card in terms of sound (everyone says it’s the quietest card and makes no noise, but others say it makes the most noise in their system). So if it has an acceptable noise level then one would assume the 5770 would also have, ie. the same acceptable noise level, why would one buy a 5750 that has a cooling fan, when they could purchase a 5770 with the same fan and noise level. So in my mind, if the noise level of the 5770 is indistinguishable, then one would buy it, making the other two cards obsolete. If in fact the noise level of the 5770 is noticeable from a HTCP connoisseur's point of view and the performance level of the Green HD5750 is equal to the stock 5750, then one would choose that the Green HD5750, making the stock 5750 video card obsolete. (Price being of no consequence, within reason)

Let's hope that anandtech*com/ or extremetech*com/ or some other reputable source can get a hold of this card and make some comparisons between it and the most silent 5750 and 5770, both in terms of performance, sound and features, such that the HTCP community can make up their mind.

I mean let's face it; HTCP has got to be the highest growth computer segment out there. It's all about convergence, we have all dreamed about our computers sitting next to our televisions streaming music, video, and everything else that the Internet has to offer in our living rooms. But who wants to sit by their television and listen to the hum of a fan or the noise of a hard drive. We want quiet, we want 1080P, we want native audio and want to play the occasional game at levels above that of the PS3.

My last comment is to Nvidia: As much as I love you and appreciate your driver support; I hope you’re listening, because if you don’t have bitstream, quiet performance, etc. (YOU COME BACK…. TWO YEAR)

dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

Post by dhanson865 » Sat Feb 20, 2010 4:39 pm

grnarrow wrote:One Canadian site is listing it for sale now, backordered, for $180cad.
http://www1.ncix.com/products/index.php ... PowerColor
zipzoomfly has it listed now as well. $170 US.

Audiodude
Posts: 43
Joined: Mon Mar 23, 2009 7:02 am
Location: Earth

Post by Audiodude » Sat Feb 20, 2010 5:15 pm

Hi Folks,

I finally got one of those Cards!

First results, without any tweaking in Bios and standard C&Q:

MB: MSI 770T AM2+
CPU: Phenom II X4 910e with boxed Heatsink
Ram: Standard DDRII 800
HDD: WD 1GB Greenpower EADS
Power: Seasonic S12II 330

Idle: 75W
Furmark: 150W
3D Mark 06: 135W (Canyonflight)

This is much better than my hand tweaked Brisbane 5000+ and Bios edited HD 3850!

When the Rig is finished (watercooled etc.) I will post final Results.

I also tested it Briefly in a 785 Minix Board with the same CPU and it seems to have ca. 15W idle Power draw (which is the same as the other passive Powercolor with plug).


Greetz Audiodude

TechBari
Posts: 4
Joined: Mon Feb 08, 2010 12:20 pm
Location: Toronto, Ontario, Canada

Post by TechBari » Sun Feb 21, 2010 9:12 am

Looking forward to hearing more about it.

dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

Post by dhanson865 » Sat Feb 27, 2010 8:48 am

dhanson865 wrote:
grnarrow wrote:One Canadian site is listing it for sale now, backordered, for $180cad.
http://www1.ncix.com/products/index.php ... PowerColor
zipzoomfly has it listed now as well. $170 US.
Newegg now has it. 5750

Zargon
Posts: 77
Joined: Sat Feb 20, 2010 9:00 am
Location: Urbana, IL

Post by Zargon » Sat Feb 27, 2010 8:59 am

thats as much as a 5770 :(

Audiodude
Posts: 43
Joined: Mon Mar 23, 2009 7:02 am
Location: Earth

Post by Audiodude » Sat Feb 27, 2010 3:58 pm

I Just read the Release notes of the latest RBE and noticed that it's not possible to tweak the GPU voltage of the reference HD 5750 due to a different VR Chip.

But....

Good News...

The Go!Green has the programmable VT1165MF for the voltage regulation. So it should be possible to tweak the power consumption even further.
The voltage regulation hardware is completely overhauled on the G!G.

Image Image

I just checked the default voltages:

boot and high 3D: CPU 700Mhz @ 1.1V
2D: CPU 157Mhz @ 0,95V
low 3D: 500Mhz @ 1.0V
UVD/TV/Bluray: 400Mhz @ 0.95V

Does anyone know the default voltages of the reference HD 5750?

Greetz Audiodude
Last edited by Audiodude on Mon Mar 01, 2010 7:06 am, edited 1 time in total.

Fungi
Posts: 95
Joined: Fri Dec 01, 2006 1:27 pm

Post by Fungi » Sun Feb 28, 2010 12:10 am

Zargon wrote:thats as much as a 5770 :(
It's definitely not ideal cost performance, but it doesn't have the PCIe power connector and putting a passive heatsink on another 5750 would end up at a similar price point anyway.

kvik
Posts: 11
Joined: Sun Nov 08, 2009 3:42 pm
Location: Copenhagen, Denmark

Post by kvik » Tue Mar 02, 2010 8:21 am

Alright, I have waited for two months to get a passive HD5750 from a danish shop, but it will never get in stock.

Can someone help me find an online shop in Germany or UK who wants to ship to Denmark and accepts Mastercard or Visa payment?
For some reason, those I've found who actually ships to Denmark, only accepts Paypal and bank transfer.

Audiodude
Posts: 43
Joined: Mon Mar 23, 2009 7:02 am
Location: Earth

Post by Audiodude » Tue Mar 02, 2010 8:51 am

hey kvik,

did you try http://www.alternate.de/html/product/de ... no=JCXOV7&? That's where I bought my Card and they offer Payment on delivery to denmark and I think credit card should be possible to. They are not the cheapest though.

Edit: Credit Card isn't possible, but payment on delivery (postman collects the money in exchange for the goods) this is called "Bar Nachnahme".

Greetz Audiodude

dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

Post by dhanson865 » Tue Mar 02, 2010 9:34 am

Audiodude wrote:The Go!Green has the programmable VT1165MF for the voltage regulation. So it should be possible to tweak the power consumption even further.
The voltage regulation hardware is completely overhauled on the G!G.

I just checked the default voltages:

boot and high 3D: CPU 700Mhz @ 1.1V
2D: CPU 157Mhz @ 0,95V
low 3D: 500Mhz @ 1.0V
UVD/TV/Bluray: 400Mhz @ 0.95V

Does anyone know the default voltages of the reference HD 5750?

Greetz Audiodude
I searched and couldn't find it. I really appreciate the post with pics and voltages!

Audiodude
Posts: 43
Joined: Mon Mar 23, 2009 7:02 am
Location: Earth

Post by Audiodude » Tue Mar 02, 2010 10:05 am

I just compared some Bios files from TechPowerUp! and it seems that the voltages are the same as with other Boards.
This would mean, that the lower power consumption is solely achieved by the more efficient voltage regulation circuits.

Greetz Audiodude

Audiodude
Posts: 43
Joined: Mon Mar 23, 2009 7:02 am
Location: Earth

Post by Audiodude » Tue Mar 02, 2010 3:49 pm

jack_wolfskind wrote:I really had hoped they would have lowered the voltage about 10%, to get that 21%, as that would really be awesome.
Why that?

If they had lowered the voltage, the card would already be at its best.
But with standard voltage there ist still the possibility of tweaking it even further...

By the way, i am really pushing this card today. The GPU is running dirt2 replays for hours now to heat up my Reserator. After that I ran Furmark for hours without overheating anything on the Mainboard (that's where the power comes from). I really think the claims of Powercolor are right.
The vr heatsinks and the mem heatsinks are at 65°C (measured with a decent ir thermometer).
Furmark measures 57°C for the GPU watercooled with ZM-GWB3 and the water Temps are at 40°C which seems high but is perfectly alright for the Reserator (ambient is 24°C).

Image

So everything is cool.

Greetz Audiodude


Edit: I tried to measure the cards power consumption as good as i can(with a Conrad Energy Check 3000 at the wall socket).

From the Test with my minix board i know that idle power consumption is around 15W wich is pretty much the same as a good standard card.
In my rig with the MSI 770T-C45 and a
Brisbane dualcore @5x200 @0,8VCore fixed with crystalcpuid
the idle consumption is ca. 83W.

When Furmark kicks in (wich creates ca. 95-97% use), the consumption rises to 134W. That means a rise of 51W. If we add 15W standby consumption, we get 66W at load without taking into account that the cpu also uses a little bit more power at load (1 core is used 60-85%)

I think this definitely shows that Powercolor did their homework.
This card is a nice piece of efficient engineering.

Efficient engineering of power circuits has proven to save up to 20W at load with recent motherboards so why shouldn't that be possible with graphics boards where some vendors don't even bother to put the right circuitry on their products to get the reference consuption values.

Post Reply