Intel Atom D510 File Server Finished with Power Results!

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
lifeisgood
Posts: 14
Joined: Sat Mar 27, 2010 1:48 pm

Intel Atom D510 File Server Finished with Power Results!

Post by lifeisgood » Sat Mar 27, 2010 2:39 pm

.
Last edited by lifeisgood on Mon Feb 15, 2016 9:42 pm, edited 16 times in total.

Jay_S
*Lifetime Patron*
Posts: 715
Joined: Fri Feb 10, 2006 2:50 pm
Location: Milwaukee, WI

Re: Lowest Power possible. Intel Atom D510 Windows 2003 Ser

Post by Jay_S » Sat Mar 27, 2010 4:08 pm

lifeisgood wrote:I still need the following components:

Western Digital 1TB Green Hard Drive with 64MB of Cache
Another 2GB of PC6400 Memory for a total 3GB
Cheapest SATA DVD Drive I can find.
PicoPSU-80
I would not buy the 64MB cache green drive for use with server 2k3. I believe this is the WD10EARS, part of WD's new "advanced format" drives, which uses 4k sectors. Server 2k3, along with XP & WHS, will not like the 4k sectors. You have to jumper something or other. More here:
http://forum.wegotserved.com/index.php? ... -wd-align/

Also, unless you really need 3GB of RAM, just replace the 1GB stick with your 2GB stick. The D510MO doesn't support dual-channel memory, so there's no performance gains to be had with multiple sticks. Just extra power consumption if your applications don't use it.

mark19891989
Posts: 187
Joined: Tue May 26, 2009 10:37 am
Location: UK

Post by mark19891989 » Sat Mar 27, 2010 5:38 pm

I have the same case in my build here

viewtopic.php?t=58201

im using a pico psu with a intel e5200 with 2 full size drives and have idle power usage of 33w , so i think your build with an atom and 1 drive will be less than 40w

mark19891989
Posts: 187
Joined: Tue May 26, 2009 10:37 am
Location: UK

Post by mark19891989 » Sat Mar 27, 2010 5:50 pm

mark19891989 wrote:I have the same case in my build here

viewtopic.php?t=58201

im using a pico psu with a intel e5200 with 2 full size drives and have idle power usage of 33w , so i think your build with an atom and 1 drive will be less than 30w

lifeisgood
Posts: 14
Joined: Sat Mar 27, 2010 1:48 pm

Post by lifeisgood » Sat Mar 27, 2010 6:17 pm

.
Last edited by lifeisgood on Mon Feb 15, 2016 9:42 pm, edited 1 time in total.

Jay_S
*Lifetime Patron*
Posts: 715
Joined: Fri Feb 10, 2006 2:50 pm
Location: Milwaukee, WI

Post by Jay_S » Sat Mar 27, 2010 7:26 pm

lifeisgood wrote:Is this the Hard Drive that would work best for Win2k3 server?
http://www.newegg.com/Product/Product.a ... 6822136317
Hmm the WD10EADS appears no longer available through newegg... Closest similar drive is the WD10EVDS:
http://www.newegg.com/Product/Product.a ... 6822136496
The EVDS is *not* the new advanced format drive. It will work in older operating systems out of the box. Don't buy it without doing your own homework though, might be something I haven't seen.

Might be helpful - how to read a WD drive model number:
http://www.wdc.com/en/library/2579-001028.pdf

Otherwise, you can jumper the EARS drives to trick your OS into thinking it's aligned.

lifeisgood
Posts: 14
Joined: Sat Mar 27, 2010 1:48 pm

Post by lifeisgood » Sat Mar 27, 2010 8:45 pm

.
Last edited by lifeisgood on Mon Feb 15, 2016 9:43 pm, edited 1 time in total.

mark19891989
Posts: 187
Joined: Tue May 26, 2009 10:37 am
Location: UK

Post by mark19891989 » Sun Mar 28, 2010 5:57 am

lifeisgood wrote:Sweet! Lucky the one in your build doesn't have the window on the one side huh? I'm not too fond of gamer looking cases....I like things to be very simple.

Oh yeah definitely it probably would add some extra load, I think even with the extra ram stick, I'm shooting for 15w, but even if I'm at 20-21 idle, it shouldn't be too bad.

I just looked at the cost of the kilowatt in the state where I am moving to, and at 20w, it will cost 91 cents a month to run.

Sweet! That means probably with the router, 15w +/-, I could run both for a dollar and some change each month.

I put the picture up with it painted, and the metal baffle removed, and I like it a lot more. I may end up adding a 80mm slow spinning fan upfront just to be sure.

Is this the Hard Drive that would work best for Win2k3 server?
http://www.newegg.com/Product/Product.a ... 6822136317
yer my case is solid, im not really a fan of case windows tbh

the front looks much better now the inside has been painted :)

i dont have a fan on the front of mine, i just have 1 at the back, if i put my hand in front of the grill at the front i can feel air slowely getting sucked in.

lifeisgood
Posts: 14
Joined: Sat Mar 27, 2010 1:48 pm

Post by lifeisgood » Sun Mar 28, 2010 12:10 pm

.
Last edited by lifeisgood on Mon Feb 15, 2016 9:43 pm, edited 2 times in total.

lifeisgood
Posts: 14
Joined: Sat Mar 27, 2010 1:48 pm

Post by lifeisgood » Sat Apr 10, 2010 8:43 pm

.
Last edited by lifeisgood on Mon Feb 15, 2016 9:43 pm, edited 1 time in total.

gizmoronimo
Posts: 2
Joined: Sun May 23, 2010 5:17 pm
Location: Norway

Nice job! got any facts & figures for performance?

Post by gizmoronimo » Sun May 23, 2010 5:44 pm

I just started this type of project myself.....
Going a little more crazy, though...;)
I bought the Asus AT5NM10-I & the 3ware Escalade 9500S-4LP (PCI-X RAID)

The Plan is Loading Freenas onto a 2GB CF card with sata adapter, plugged in the onboard SATA plug.
3x 1TB WD Green's in Raid5 on The Raid card + 1 500GB WD Green for
downloading torrents.
Also thinking of sticking another 500 WD Green on the last SATA onboard,
just to backup the REALLY important stuff on the R5 array...(pics & tunes).
Been testing over my Gigabit net, and I get between 80-90 MegaByte PS write speed to a temp. Raid0 array...
The board just jumps to 50% CPU use...:)
Really surprised by the NM10 chipset & the D510 CPU...:)
Jus wish I bought with PCI-E and Dual GB LAN...maybe later...;)

lifeisgood
Posts: 14
Joined: Sat Mar 27, 2010 1:48 pm

Post by lifeisgood » Thu May 27, 2010 3:46 pm

.
Last edited by lifeisgood on Mon Feb 15, 2016 9:44 pm, edited 1 time in total.

aztec
Posts: 443
Joined: Mon Dec 12, 2005 5:01 am
Location: Foster City, CA

Post by aztec » Thu May 27, 2010 4:13 pm

nice build.

I'm building a similar toaster NAS.

Shuttle K45
2x 2TB HDs
Pico PSU
92mm Nexus
D510

...and yes, these mITX boards are fun to work with.

gizmoronimo
Posts: 2
Joined: Sun May 23, 2010 5:17 pm
Location: Norway

Post by gizmoronimo » Tue Jun 01, 2010 12:48 pm

Yeah! will post some mugshots when the last couple of parts arrive...
The coolest part is an OLD AT case (sorta like mATX, only it's not..)
The Mainboard won't be an issue...:) but still a lot more parts going in..

Post Reply