Maximum heathsink height for NSK-3480
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Maximum heathsink height for NSK-3480
Hello... is it possible to have that information?
The dimensions of the case are:
13.75"(H) x 7.75"(W) x 14"(D)
34.93cm(H) x 19.69cm(W) x 35.56cm(D)
Thanks.
The dimensions of the case are:
13.75"(H) x 7.75"(W) x 14"(D)
34.93cm(H) x 19.69cm(W) x 35.56cm(D)
Thanks.
-
- Posts: 24
- Joined: Sat Jun 07, 2003 9:30 am
- Location: New York City
No, the Megahalems will not fit in a 3480.
I have a Mugen2 in my 3480. Scythe lists it officially as 157mm tall:
http://www.scythe-eu.com/forum/mugen-se ... sions.html
I have 12 mm from the top of the heatpipe cap to the edge of the case frame. That maxes out the height to 158.2 mm
Lawrence Lee lists the Megahalems at 158.7mm tall:
http://www.silentpcreview.com/article916-page1.html
I have a Mugen2 in my 3480. Scythe lists it officially as 157mm tall:
http://www.scythe-eu.com/forum/mugen-se ... sions.html
I have 12 mm from the top of the heatpipe cap to the edge of the case frame. That maxes out the height to 158.2 mm
Lawrence Lee lists the Megahalems at 158.7mm tall:
http://www.silentpcreview.com/article916-page1.html
Might be missing a decimal ... Did you mean 157 + 1.2 = 158.2mmpsyopper wrote:I have a Mugen2 in my 3480. Scythe lists it officially as 157mm tall:
http://www.scythe-eu.com/forum/mugen-se ... sions.html
I have 12 mm from the top of the heatpipe cap to the edge of the case frame. That maxes out the height to 158.2 mm
Lawrence Lee lists the Megahalems at 158.7mm tall:
http://www.silentpcreview.com/article916-page1.html