RMclock alternative?

More popular than ever, but some are still very noisy.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
cloneman
Posts: 448
Joined: Sat May 21, 2005 9:48 am

RMclock alternative?

Post by cloneman » Wed Aug 04, 2010 12:32 pm

I used this:
http://www.flipfire.net/download/rtcore64.zip

to get RMclock's signed x64 driver to run in windows 7. Unfourtunately I don't think it supports Core i3 Cpus.

I need something to do the "RUN HLT COMMAND" so my stupid laptop stops whining!!!!

BillyBuerger
Patron of SPCR
Posts: 857
Joined: Fri Dec 27, 2002 1:49 pm
Location: Somerset, WI - USA
Contact:

Post by BillyBuerger » Wed Aug 04, 2010 3:47 pm

RMClock unfortunately hasn't been updated in a LONG time. It was an awesome tool at it's time with nice graphs and stuff. The Core iX CPUs have a much more advanced clocking/voltage system and seem to run about as cool as possible out of the box at idle at least. I tried undervolting my Core i3 530 from the BIOS and it wouldn't budge at idle. Cut some load power off but that's it. So even if RMClock did work, I don't think it would help much.

cloneman
Posts: 448
Joined: Sat May 21, 2005 9:48 am

Post by cloneman » Wed Aug 04, 2010 3:51 pm

the main issue is is that I need to use the old trick to eliminate motherboard coil whine on a i3 laptop. the RUN HLT command trick.

faugusztin
Posts: 450
Joined: Mon Mar 29, 2010 2:47 am
Location: Bratislava, Slovak Republic

Post by faugusztin » Wed Aug 04, 2010 11:19 pm

cloneman talks about this i guess :
http://www.youtube.com/watch?v=NSKqlttAp-4

The solution was either to soften up the CPU frequency switching, as these sounds are product of CPU switching frequency/voltage via C1E/EIST. Of course one solution is to turn C1E/EIST off, but that is not a good idea in case of laptop.
That is the reason for RMclock, where using some settings killed or minimized these sounds. In my case, these settings helped :
http://media.photobucket.com/image/lapt ... nefix2.png

But as cloneman said, RMclock is a problem in his case.

NoNoise
Posts: 2
Joined: Fri Aug 06, 2010 3:45 am
Location: Denmark

Post by NoNoise » Fri Aug 06, 2010 3:54 am

Hi Cloneman,

You are not alone in your pursuit on a solution for whining capacitors on systems not supported by RMCLOCK!

I've been searing for days and I'll let you know if I find a utility or alternative solution.

Please keep posting if you get any new leads / clues :-)

Regards
NoNoise

cloneman
Posts: 448
Joined: Sat May 21, 2005 9:48 am

Post by cloneman » Mon Aug 09, 2010 1:14 am

Here's some "whinecandy" for you :D
Gateway ID49c (futureshop)

http://www.youtube.com/watch?v=3QdC9eDnMfk&fmt=35

Pending return/exchange.

NoNoise
Posts: 2
Joined: Fri Aug 06, 2010 3:45 am
Location: Denmark

Post by NoNoise » Mon Aug 09, 2010 6:46 am

Well I've found a temporary solution to the whine-noise.

Simply play a random sound on repeat in Windows Media Player (Could be a silent MP3).

It completely silents the coil whining and only puts minimal stress on the CPU :-)

cloneman
Posts: 448
Joined: Sat May 21, 2005 9:48 am

Post by cloneman » Mon Aug 09, 2010 9:56 am

NoNoise wrote:Well I've found a temporary solution to the whine-noise.

Simply play a random sound on repeat in Windows Media Player (Could be a silent MP3).

It completely silents the coil whining and only puts minimal stress on the CPU :-)
thanks.... doesn't work for me though.

Post Reply