It is currently Thu Dec 18, 2014 1:57 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Advice for a [performance] nettop
PostPosted: Fri Feb 18, 2011 3:34 am 
Offline

Joined: Fri Feb 18, 2011 2:55 am
Posts: 3
Hello everyone,

I need some piece of advice concerning a PC to be attached to a 42" monitor and find some kind of bracket that allows me to mount monitor+PC to the wall.

My requirements are pretty strict:
1) The PC cannot be an ION based platform since it must run a quite CPU intensive application. Until now I've only trusted other solutions (based on Intel E7500 or i3) with dedicated graphic card. What's your opinion on a switch to an ION (also dual-core) platform?
2) The PC size should be the smallest possible. Zotacs and Acers suggested in this thread would be perfect but break requirement #1
3) I still have to find a VESA compatible bracket that allows me to host a PC *and* let me mount everything on the wall (and bear the whole weight)
3) The GPU shall be a discrete chipset (no IntelHD whatsoever), able to provide a smooth fullHD experience
4) Power consumption and noise are not an issue (given the other it was obvious)

Thanks for any hint!


Top
 Profile  
 
 Post subject: Re: Advice for a performant nettop
PostPosted: Fri Feb 18, 2011 11:50 am 
Offline

Joined: Thu Aug 05, 2010 4:38 pm
Posts: 298
Location: ontario
does the cpu intensive application have to be run on the nettop, or can it be run on a different machine, and then have the nettop running a remote desktop?

if that was the case, ion or fusion based nettops would be sufficient.

joins today; asks for advice and specifies that noise is not a concern... lol

_________________
my foamed mini p180 | corsair cx-400 w/ fan swap | scythe mugen-2 | thermalright hr-05 | unlocked sempron 140 | asrock 880g | 8gb mushkin |vertex 30gb boot | 7TBs storage |


Top
 Profile  
 
 Post subject: Re: Advice for a performant nettop
PostPosted: Fri Feb 18, 2011 12:52 pm 
Offline

Joined: Tue Feb 08, 2011 12:44 am
Posts: 36
any comment on what application it is? then we can guage what kind of CPU/gpu you require


Top
 Profile  
 
 Post subject: Re: Advice for a performant nettop
PostPosted: Mon Feb 21, 2011 1:09 am 
Offline

Joined: Fri Feb 18, 2011 2:55 am
Posts: 3
nzdcoy wrote:
any comment on what application it is? then we can guage what kind of CPU/gpu you require


Hi nzdcoy, thanks for your feedback.

The application is installed locally on the PC (no remote desktop) and it is an Adobe Flex application that will run at 1920x1080.
At the moment this kind of applications are CPU bound (as specified in my top post).
I already know (more or less) the CPU class I need for such a task because I've mounted similar embedded PC *inside* other monitor's chassis (for example: http://goo.gl/GOJgR).

Now I need a PC with similar performaces but this time will be attached externally to the monitor (it's another brand/model and there's no room inside), thus the space contraints. An external chassis like this one (http://goo.gl/GkGlf) is nice but that's beyond what I can afford in terms of room around the monitor.

Before going for a "hand-made" frame to host this PC, I'd like to explore the possibility to buy something already done. Any advice on this? I couldn't really find much.

Hope this clarifies my requirements.

Thanks again.


Top
 Profile  
 
 Post subject: Re: Advice for a [performance] nettop
PostPosted: Wed Feb 23, 2011 8:25 am 
Offline

Joined: Wed Feb 23, 2011 8:01 am
Posts: 12
If you really want to go prebuilt you can go with something like the viewsonic VOT550. http://www.viewsonic.com/products/vot550.htm

Or how about a laptop with the lid closed?

If you decide to go with a self build I would recommend a i3/i5 mini-itx and something like a minibox m350 case http://www.mini-box.com/M350-universal- ... -enclosure


Top
 Profile  
 
 Post subject: Re: Advice for a [performance] nettop
PostPosted: Thu Feb 24, 2011 3:44 am 
Offline

Joined: Fri Feb 18, 2011 2:55 am
Posts: 3
particleman wrote:
If you really want to go prebuilt you can go with something like the viewsonic VOT550. http://www.viewsonic.com/products/vot550.htm

Or how about a laptop with the lid closed?

If you decide to go with a self build I would recommend a i3/i5 mini-itx and something like a minibox m350 case http://www.mini-box.com/M350-universal- ... -enclosure


Hello,

thanks for your feedback.
I'm afraid a laptop would be too expensive.

In lack of better ideas, I think the only way out for me is getting one of those cases with general sizes as your links suggest and make my own metal frame that will allow one side to host the PC and on the other side to attach the monitor to the wall.

Or I'll give this ION dual-core platform try ...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group