how many watts?

New to PC silencing? Read & post your questions here. Dedicated to rosy_toes.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
gongli
Posts: 5
Joined: Fri Mar 18, 2011 5:23 pm

how many watts?

Post by gongli » Sun Mar 27, 2011 6:18 am

hi

i am trying to get some sense of the components for my first build. im trying to put together an i7 sandy bridge, and i expect to load the cpu a bit, and i will want 2 hd's and 4g of ram. so i am wondering how much wattage i will need. i came across a mention that the tdp of the sandy bridge is 95w, but

i tried some configs on this and i would guess that 450w would be enough without video card, 600w with:

http://www.journeysystems.com/power_supply/

but it doesnt have the cpu im looking for but you can figure it out anyway.

im especially interested in the fanless psu, but i am wondering what happens, for instance, if the wattage draw is higher than what the psu is rated for? does a fuse blow or something like that, that seems pretty bad??

thanks for any info
-neal

ces
Posts: 3395
Joined: Thu Feb 04, 2010 6:06 pm
Location: US

Re: how many watts?

Post by ces » Sun Mar 27, 2011 6:29 am

gongli wrote:450w would be enough without video card
That seems way to high. From what did you build that number?

tim851
Posts: 543
Joined: Wed Aug 13, 2008 11:45 am
Location: 128.0.0.1

Re: how many watts?

Post by tim851 » Sun Mar 27, 2011 7:24 am

gongli wrote:i tried some configs on this and i would guess that 450w would be enough without video card, 600w with
Way too high. There's no way a Sandy Bridge setup with a GPU will require a 450w PSU. Not even massively overclocked. Your GPU of choice draws 150w according to that website. Which one is it? 150w would indicate a GeForce GTX 460 or a Radeon 6800 or below.

The 400/480w Seasonic passive PSUs should definitely suffice. If you want to be certain, get a X-560, it's semi-passive and in your setup the fan won't spin up until you fire up a video game.

If you overtax a PSU, esp. a quality one like the Seasonics, the worst you're looking at is the system becoming unstable because the voltages drop out of specification.

ntavlas
Posts: 811
Joined: Mon Jul 16, 2007 2:35 pm
Location: Greece
Contact:

Re: how many watts?

Post by ntavlas » Sun Mar 27, 2011 10:17 am

450 watts should certainly be enough. A system with the components you mention would draw around 250-300 watts under load (less if only the cpu is stressed) well within the capabilities of a 450 watt psu, with some headroom for overclocking.

quest_for_silence
Posts: 5275
Joined: Wed Jun 13, 2007 10:12 am
Location: ITALY

Re: how many watts?

Post by quest_for_silence » Mon Mar 28, 2011 4:09 am

gongli wrote:i tried some configs on this and i would guess that 450w would be enough without video card, 600w with

Something like a Radeon HD 6950? At anyway, AFAIK an oc'ed i7 with a pair of disks and sticks won't pass the 150-180W DC marks ever (with the IGP).
gongli wrote:what happens, for instance, if the wattage draw is higher than what the psu is rated for?

I mean it depends of the specific PSU: some can get away scot-free when overloaded, some other else just melts. Often, at anyway, there are over-current and over-temp protections which switch off the PSU itself.
To the first type belong the Seasonic X-400FL and X-460FL, I guess.

djkest
Posts: 766
Joined: Mon Sep 10, 2007 1:05 pm
Location: Colorado, USA

Re: how many watts?

Post by djkest » Mon Mar 28, 2011 6:08 am

You could honestly run a Sandy Bridge GPU-less system with a 300W power supply and have plenty of juice left over. Keep in mind that Bridge CPUs can be undervolted and then would not use the full 95 Watts. Hard drives take ~10 Watts max.

Depends what graphics card you have, but the 430W power supply in my system only nees to supply about 200W to my system under full GPU/CPU load.

So, a 450 or 500 Watt should be enough, unless you go with one of the more hungry video cards. If you game, that would be good. If you don't, your just wasting money. A radeon HD 5750 can be made fanless (Arctic Cooling Accelero S-1 rev 2) and underclocked/undervolted to a point where they use very little power.

Post Reply