It is currently Tue Jun 18, 2013 1:24 pm

View unanswered posts | View active topics


Board index » Silent Hardware » CPU Cooling

All times are UTC - 8 hours




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
Rigel
 Post subject: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Sun Dec 18, 2011 8:17 am 
Offline

Joined: Sun Dec 18, 2011 8:10 am
Posts: 2
Hi, I am giving my little sister my old pc but the stock cpu cooler is pretty noise.

The motherboard is Asrock G31M-S micro atx, and the case is a no-name miditower.

She is going to play on it as well, so the CPU is going to be stressed :)

I'm not looking for the very best cooler, just one that is way more quiet than the stock one, can handle gaming, isn't too big for the case and too expensive.

Thank you :)
Top
 Profile  
 
Abula
 Post subject: Re: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Sun Dec 18, 2011 1:04 pm 
Offline

Joined: Tue Nov 02, 2004 12:22 pm
Posts: 894
Location: Guatemala
Cooler Master Hyper 212 Plus $21 free shipping would be a very cheap solution, crosscheck if your sisters case has a 160mm height clearance for the cooler height, else a Cooler Master GeminII S $33 free shipping could be an option still not that expensive.

_________________
MiniMi: i3 2100T + Intel DH61DL + Hitachi 5K500B + Lian Li Q08 + picoPSU 150XT
MicroMi: i5 2500K + ASUS Maximus IV Gene-Z + Galaxy GTX580 + Crucial M4 + SilverStone TJ08-E + Seasonic X-660
ServeMi: Xeon E3-1230 + SUPERMICRO X9SCM-F + 2x Intel SASUC8I + 8x Hitachi 5K3000 + 6x Samsung HD154UI + Antec 1200 + CP850
HTPCMi: i3 2120 + Intel DQ67SW + Sparkle GTS450 + Crucial M4 + Antec SOLO II + Seasonic X-400

Top
 Profile  
 
SebRad
 Post subject: Re: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Sun Dec 18, 2011 3:16 pm 
Offline
Patron of SPCR

Joined: Sun Nov 09, 2003 7:18 am
Posts: 1061
Location: UK
Hi, E8400 isn't a very hot chip so if space limited a 92mm fan cooler should do the job.
If the Hyper 212 is too big look at the Hyper TX3, or Arctic Cooling Freezer 7 or Freezer 13.
Regards, Seb

_________________
i7 2600k @4.5GHz under NH-C14 w/2xTY-140PWM fans, P8P67Pro, 8GB RAM, GTX560Ti OC w/TwinTurbo II and BIOS fanspeed mod. 2x120GB HyperX 3K RAID 0 & 2TB EARX in Scythe QuietDrive outside case. Antec Signature 650 fan swapped. CoolerMaster 201C with 2x92 + 80mm fan out rear, holes-in-floor and mesh top+front intakes.

Top
 Profile  
 
loimlo
 Post subject: Re: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Wed Dec 21, 2011 8:26 am 
Offline

Joined: Thu May 03, 2007 3:58 am
Posts: 747
Location: Formosa
Btw, add a rear case fan can help CPU cooling especially if you use side-blowing towers....
Top
 Profile  
 
ces
 Post subject: Re: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Wed Dec 21, 2011 10:21 am 
Offline

Joined: Thu Feb 04, 2010 6:06 pm
Posts: 3395
Location: US
The 92mm Noctua is small and can handle much more heat than your e8400 will ever generate.
http://www.newegg.com/Product/Product.a ... 6835608016

It is capable of handling overclocked quad core cpus. Here is how an older version with just a single fan performs:
http://www.frostytech.com/articleview.c ... 270&page=5

It is only 125mm high
http://www.noctua.at/main.php?show=prod ... g=en&set=1
And it is pretty much compatible with any mothboard. They even list the boards for which they have tested its compatability:
http://www.noctua.at/main.php?show=comp ... =32&lng=en

Noctua also has a policy of providing new CPU mounts for free as new chip sizes. Just remember to keep your receipts as proof of purchase.

_________________
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
"Aristotle calls man the rational animal. All my life I have been seeking evidence to confirm this" Bertrand Russell
"Only two things are infinite, the universe and human stupidity, and I'm not sure about the former" Albert Einstein

Top
 Profile  
 
kuzzia
 Post subject: Re: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Wed Dec 21, 2011 11:46 am 
Offline
Friend of SPCR

Joined: Fri Jul 02, 2010 4:41 am
Posts: 704
Location: Denmark
You could also consider a Scythe Katana 3. Cheap, very nice fan, easy mounting system, well-suited for mid-end CPU's.

For an ultra cheap solution, check out all the fans from the Arctic Cooling Alpine. AC clearly states that these do NOT offer additional thermal performance according to stock heatsinks, but noisewise they are miles ahead. SPCR have reviewed some of these.

_________________
Cooler Master Elite 341, Athlon II X3 425, Radeon 5750 (passive, fan zip-tied on), Crucial M4 64 GB.
Cooling: AC Alpine 64 Pro, rear exhaust Scythe Slipstream 800 rpm @ ~5 V

"SSD's: The difference between a casual jogger and a dog chasing a ball"

Last edited by kuzzia on Fri Dec 23, 2011 8:59 am, edited 1 time in total.

Top
 Profile  
 
Pappnaas
 Post subject: Re: What cooler do I pick for my E8400 on a micro atx board?
PostPosted: Fri Dec 23, 2011 8:03 am 
Offline

Joined: Mon May 16, 2011 11:23 am
Posts: 409
Location: Germany
Samurai zz

http://www.silentpcreview.com/silent-spirit-samurai-zz

Nice price, proven value.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Silent Hardware » CPU Cooling

All times are UTC - 8 hours


Who is online

Users browsing this forum: Google [Bot] and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group