Newegg has the case.http://www.newegg.com/Product/Product.aspx?Item=N82E16811139012
(with a $10 discount and a $20 Corsair rebate and free shipping - final cost $119.99)
I've now got the case in hand if anyone has questions.
The bottom, back, top and side panel fan positions have holes for either 120mm or 140mm fans. The two front fans are 120mm/25mm thick fans and can be replaced easily.
All front ventilation is through the side holes and bottom holes. All front ventilation is filtered through a perforated screen (as opposed to a mesh screen). The panel in front of the front filter can be removed if you want more ventilation; however, because of the filter design, I'm not sure that would make any difference.
Both HD drive racks are easily removed so that you can get to the front fans. The racks have openings where possible and the solid pieces are perforated so you should have good ventilation from the front fans even with the racks in place. Removing unused HD trays will improve the ventilation. I plan to completely remove the top HD rack.
Fans are mounted with soft gaskets in the mounting holes and long screws. These look like they will do an adequate job decoupling fans from the mounting holes. All of the fan mounting holes are oversized to accomodate the gaskets. Note that you also have the option to move the front fans into the case and mount them on the hard drive racks.
There is no fan controller which is fine by me.
The two side panels are held in place by a device with three tabs that insert into the top of each panel and those tabs are moved to release the top by pressing buttons on the back of the case. My only concern is whether the panels are held securely enough to prevent any rattle; however, that's an easy issue to deal with if it happens.
The front panel can be easily opened from either side or completely removed since it is held by two clips on each side. Two replacement clips for each side are included.
The construction quality is high as is normal for Corsair cases. The USB cable has a motherboard connector and a USB3 to USB2 adapter is included.