PicoPSU 80W Enough to drive i3-2105 and ITX H61 board?

PSUs: The source of DC power for all components in the PC & often a big noise source.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar

Post Reply
Enzo_FX
Posts: 79
Joined: Wed Apr 11, 2007 12:06 pm
Location: Los Angeles, CA

PicoPSU 80W Enough to drive i3-2105 and ITX H61 board?

Post by Enzo_FX » Sun Feb 12, 2012 7:42 pm

Looking to get a quick confirmation that this would be enough to drive the system.
It is a Gigabyte H61 ITX board, the Intel i3 2105. The rest of the system is a 2.5" 7200rpm drive, and a single stick of 4GB Ram.

m1st
Posts: 132
Joined: Sun Jan 31, 2010 6:43 pm
Location: US

Re: PicoPSU 80W Enough to drive i3-2105 and ITX H61 board?

Post by m1st » Sun Feb 12, 2012 11:11 pm

It is definitely enough for everyday use, though if you're stress testing, it'll be cutting it close.

I have an i3-2105 in an Antec ISK-300 65. Prime95+Unigine puts power consumption at the wall at around 70-80w (can't remember the exact figure...).

Post Reply