I had some MiniITX motherboard trays machined for a scratch build I was doing for myself. Unfortunately (or fortunately, who knows) I had to order a minimum of five to get the costs down. I know some people are/were in the same predicament I was in: you need to mount the motherboard, but figuring out where the IO window and PCI IO window goes is a bit of a pain in the ass. These trays solve that problem.
I'm selling these spares for $20 apiece, plus $5 for shipping. The tray will mount a single, MiniITX compliant motherboard and, optionally, a single 2.5" (laptop) hard drive and 60mm fan. The tray then mounts to whatever you're building via five, 10-32 screws. It also allows for a single, full-height PCI-compliant expansion card. Comes with four standoffs (with 6-32 threads) of the correct height. The outer dimensions are 7.750" across the back (in the hole C to hole F direction), by 6.950" (in the hole C to hole H direction), by 4.850" high. The folded-over lip that accommodates the PCI card is 0.490" wide.Note that this tray will only fit MiniITX motherboards that are compliant with the MiniITX specification.
Specifically, the IO window, the four motherboard mounting holes and the PCI expansion card IO window must be of the correct size and in the correct location for you to mount your motherboard and expansion cards to it. See these documents for the specification:
MiniITX Specification: http://www.formfactors.org/developer/specs/mini_itx_spec_V1_1.pdf
MicroATX Specification: http://www.formfactors.org/developer/specs/matxspe1.2.pdf
The MiniITX specification refers to this document.
If in doubt, check the MiniITX and MicroATX specifications against the mechanical drawing for your motherboard. Sorry, I cannot accept returns if your non-compliant motherboard does not fit the tray.
NOTE: Some images show a motherboard mounted on the tray. This is for illustrative purposes only. THIS AUCTION IS FOR THE TRAY ONLY
-- no motherboards or other electronic equipment are included.
Like I said, these are spares, but if someone is interested in wholesale sales I'd be willing to have more manufactured. Contact me to discuss pricing and lead times.