Scythe Kozuti, which has about 20mm clearance (40mm high). I ordered Coolermaster GeminII M4, which should have 1mm clearance (but the holes should be right above it), it should arrive tomorow.
In other words, the clearance from the top of the motherboard up till the upper panel is 60mm in my case, for the F version it should be that 1,5cm more. GeminII is 58-59mm high, Kozuti is 40mm high. Kozuti is unfortunately running at relatively high RPM all the time (~2000RPM), which i hope will be fixed by switching to GeminII M4. In your case, it will be GeminII M4 without questions, you will have 1,5cm clearance for the fan which should be more than enough.
This how it looks with Kozuti (the 54mm high Dominator was in the case just for testing, btw it fits too - and if you add few mm for the memory slot itself, plus the 1-2mm you got above the module, you end up with the mentoined 60mm again) :