1x Plastic Mini ITX VESA Mnt HTPC Car Computer Case 198mm*198mm*60mm - bought from ebay
1x PicoPSU-150 12V DC-DC ATX
1x AXAGO card reader CRI-X6BB
2x 8GB DDR3-1600MHz Kingston HyperX LOVo KHX1600C9D3LK2/8GX
1x HDD 2,5" SSD Mushkin Chronos 120GB Solid State Drive - MKNSSDCR120GB
1x Blu-Ray Sony 8x SATA slim
1x CPU SCYTHE SCKZT-1000 Kozuti
1x GIGABYTE H67N-USB3-B3 - two HDMI (for two LCD TV)
1x CPU Intel Core i3 3225
This is my second HTPC build. The first was this Spire caseviewtopic.php?f=14&t=63373
I want it smaller as first build and all in one (card reader and blu-ray ODD).
This case is from plastic ABS, is very small bud i muss it make higher to 70 mm (weld plastic strips together) to fit there a cpu cooler. The Scythe take the air from bottom to top. The HDD and slim blu-ray are bottom of case.
The top cover is perforated plate and magnets hold this plate.
Temp and power consumption:
idle (2 HDMI output) 34 C and 31,5 W
idle (1 HDMI output) 34 C and 27,6 W
1080p movie (2 HDMI output) 47 C and 55,3 W
burn prime 95 (2 HDMI output)54 C and 69,3 W
bluray playback (1 HDMI output) 39 C and 34,9 W