Hi,
I have an Antec P180 Mini(discontinued D:) and I am wondering if there is a foam that I can add to lower the DBA.
The case is a MicroATX, which has an Aluminum/Plastic/Aluminum construction(doesn't nothing).
Dave
Sound Dampening Foam for Antec Case
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
-
- Posts: 7
- Joined: Sun Mar 16, 2014 6:48 am
- Location: Over the Rainbow
-
- Posts: 346
- Joined: Mon Dec 28, 2009 1:42 am
- Location: Australia
Re: Sound Dampening Foam for Antec Case
* Acoustipack
* Peel and stick vinyl tiles (mass damping)
You should really deal with the components one by one though. The P180 Mini won't magically make a noisy PC silent, or even quiet. It should be seen as a final step to making a very quiet rig silent, or a noisy rig just a little bit quieter. Like a vacuum cleaner running in the next room, then you close your room door. The door will muffle the noise a bit, but it'll still be annoying to listen to.
* Replace the stock CPU cooler with a quiet aftermarket one.
* If that HD6570 has a tiny-whiney fan, get rid of the fan and replace it with a small but quiet case fan zip-tied to the heatsink. Or replace the graphics card with a quieter one.
* Replace the Antec TriCool (870RPM on the low setting) with a quieter 120mm fan, same goes for the other case fans if they buzz/tick/squeak/drone etc.
* PSU fan? If it's noisy, do a fan swap, or replace the PSU with a quieter one.
* Peel and stick vinyl tiles (mass damping)
You should really deal with the components one by one though. The P180 Mini won't magically make a noisy PC silent, or even quiet. It should be seen as a final step to making a very quiet rig silent, or a noisy rig just a little bit quieter. Like a vacuum cleaner running in the next room, then you close your room door. The door will muffle the noise a bit, but it'll still be annoying to listen to.
* Replace the stock CPU cooler with a quiet aftermarket one.
* If that HD6570 has a tiny-whiney fan, get rid of the fan and replace it with a small but quiet case fan zip-tied to the heatsink. Or replace the graphics card with a quieter one.
* Replace the Antec TriCool (870RPM on the low setting) with a quieter 120mm fan, same goes for the other case fans if they buzz/tick/squeak/drone etc.
* PSU fan? If it's noisy, do a fan swap, or replace the PSU with a quieter one.
-
- Posts: 5275
- Joined: Wed Jun 13, 2007 10:12 am
- Location: ITALY
Re: Sound Dampening Foam for Antec Case
flemeister wrote:You should really deal with the components one by one though. The P180 Mini won't magically make a noisy PC silent, or even quiet. It should be seen as a final step to making a very quiet rig silent, or a noisy rig just a little bit quieter. Like a vacuum cleaner running in the next room, then you close your room door. The door will muffle the noise a bit, but it'll still be annoying to listen to.
* Replace the stock CPU cooler with a quiet aftermarket one.
* If that HD6570 has a tiny-whiney fan, get rid of the fan and replace it with a small but quiet case fan zip-tied to the heatsink. Or replace the graphics card with a quieter one.
* Replace the Antec TriCool (870RPM on the low setting) with a quieter 120mm fan, same goes for the other case fans if they buzz/tick/squeak/drone etc.
* PSU fan? If it's noisy, do a fan swap, or replace the PSU with a quieter one.
+1: I own a P180 Mini, and IME it shouldn't deserve any mass damping/noise muffling.
As noted by flemeister, none of the moving part you have in your current main build seems enough quiet (I mean the three case fans, the PSUs, the CPU cooler, the GPU cooler, but even the HDD if it were a 7200rpm one), so the money you will throw in any foam will be much well spent for some better component (it look obvious to me that you will probably spend more on parts, in case), as IMHO you won't get any substantial improvement by adding those sound dampening panels (not to mention you will note a general increase in temps, and so maybe a further increase in fans speed).
-
- Posts: 7
- Joined: Sun Mar 16, 2014 6:48 am
- Location: Over the Rainbow
Re: Sound Dampening Foam for Antec Case
I already have the P180 Mini, thanks thoughflemeister wrote:
You should really deal with the components one by one though. The P180 Mini won't magically make a noisy PC silent, or even quiet. It should be seen as a final step to making a very quiet rig silent, or a noisy rig just a little bit quieter. Like a vacuum cleaner running in the next room, then you close your room door. The door will muffle the noise a bit, but it'll still be annoying to listen to.
1: Going to buy Oneflemeister wrote: * Replace the stock CPU cooler with a quiet aftermarket one.
* If that HD6570 has a tiny-whiney fan, get rid of the fan and replace it with a small but quiet case fan zip-tied to the heatsink. Or replace the graphics card with a quieter one.
* Replace the Antec TriCool (870RPM on the low setting) with a quieter 120mm fan, same goes for the other case fans if they buzz/tick/squeak/drone etc.
* PSU fan? If it's noisy, do a fan swap, or replace the PSU with a quieter one.
2&4: Its ok for now
3: I will buy a new one, once I go to the store
---------------------------------------
Thanks For the Info guys, I have decided against the foam, but going to buy a new heatsink, and intake fan