Hi, whats the safest (and simplest) way to 7 volt a psu fan?
I replaced the stock fan with a YS-tech silent, however its still too loud for my liking. Its currently running off the standard fan connector on the psu board.
Would just soldering a pot inline with one of the fan wires be ok? or resistors?
thanks
Amit
best way to 7 volt a psu fan?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
-
- Posts: 11
- Joined: Fri Dec 27, 2002 7:06 am
- Location: Nottingham, UK
The help is right here on SPCR
Check out the last section "OBTAINING LESS THAN 12VDC" of this link:
http://www.silentpcreview.com/modules.p ... =63&page=1
http://www.silentpcreview.com/modules.p ... =63&page=1
-
- Posts: 58
- Joined: Fri Dec 06, 2002 10:46 am
-
- Posts: 11
- Joined: Fri Dec 27, 2002 7:06 am
- Location: Nottingham, UK