Welcome new members

pdf27 · **Joined:** Wed Nov 12, 2003 12:59 pm **Posts:** 264

Well, I'm getting about 0.35 points per hour of CPU time so far, so somehow I don't think I'll catch up with you guys in a hurry

(P3-733, Tinkers only so far, 30 minutes per frame, 400 frames per WU, 71 points per WU so far)

CoolGav · **Posted:** Thu Mar 18, 2004 4:05 am

pdf, make sure you have the command line option -forcesse enabled. I think that PIIIs are okay at tinkers, and enabling SSE which they support will help a bit.

haysdb · **Posted:** Thu Mar 18, 2004 11:23 am

P3's should default to using SSE, and Tinkers do not utilize SSE anyway. There's nothing you can do to speed up a Tinker.

David

NullObject · **Posted:** Thu Mar 18, 2004 3:14 pm

Don't worry about the tinker. It seems that everyone gets a tinker as their first work unit. I think every processor I ran [email protected] on got a tinker for the first work unit.

And Welcome to the team

wgragg · **Joined:** Thu Nov 13, 2003 7:34 am **Posts:** 246

I must be lucky. All of the last 10 comps I added got gromacs first. In fact, none of them have gotten a tinker yet. Could it be because they are p4 2.4c's?

samwc912 · **Joined:** Sun Dec 14, 2003 10:43 pm **Posts:** 54

Quote:

Could it be because they are p4 2.4c's?

I have p4 2.6c, but I got a Tinker for my first one. It is still foldind, but I expect it to finish later tonight.
In fact it should have finished this morning, but because my cpu fan turned off on its own in the middle of the night :shock:

The computer shut off as a security measure. The final temp was recorded at 95 degree Celsius!!!! But I think there was no harm done... yet...

On to another subject, I've been to http://folding.stanford.edu/cgi-bin/teampage?q=31574 , but can't find my username on the page (samwc912). Is this normal? I have entered the right team number in the config. Or should I do something else that I've missed? And I can't find myself anywhere in the stats.

*edited for typos*

sthayashi · **Posted:** Fri Mar 19, 2004 1:08 pm

I don't think anything will get reported until the work is returned. I could be wrong on that though.

samwc912 · **Joined:** Sun Dec 14, 2003 10:43 pm **Posts:** 54

Quote:

I don't think anything will get reported until the work is returned. I could be wrong on that though.

Rechecked on the status of the work, and you're right. The WU has just been finished and I'm in the stats now. I've finished that huge 400 frames sTinker, and I'm at 8% of a new 200 Gromac.
But I got 71 points for 1 WU though. So is it better to work on tinkers for getting more points or it adds up to the same doing gromacs for the same amount of time.

unregistered · **Joined:** Mon Aug 11, 2003 5:54 pm **Posts:** 542

samwc912 wrote

Quote:

So is it better to work on tinkers for getting more points or it adds up to the same doing gromacs for the same amount of time.

Actually that kind of depends. If you have a processor with SSE capabilities (you do) you will score higher with Gromacs. If your processor does not do SSE you will be scoring higher with the tinkers.

Do you know about adding tags? -advmethods etc?

samwc912 · **Joined:** Sun Dec 14, 2003 10:43 pm **Posts:** 54

unregistered wrote:

Do you know about adding tags? -advmethods etc?

Yeah, Ive added -advmethods and -forceasm. I started getting gromacs after adding these tags. Are there other useful tags like these ones? For speeding up performance.

aston · **Posted:** Sat Mar 20, 2004 4:50 pm

-forcesse

You probably don't need it for you P4, but it can't hurt.

peteamer · **Posted:** Sun Mar 21, 2004 8:42 am

Not a 'Welcome New Member' but a 'Welcome Back' to bill_amer
who returns with his celery 700 and introduces to the fold his Athlon 64

And he's got the bug to uprade.. sorry, do a necessary rebuild... with improved components :wink:

(Which hopefully will leave enough bits left over to build another box :twisted:

)

Might introduce him to the idea of blades

Hang on... just realised he's probably gonna be on my threats list as well soon :evil:

Oh well.. it's for the good of the team I suppose

Welcome also to all the new members we've had recently, 'Welcome to the Addiction' :wink:

Pete

mas92264 · **Posted:** Sun Mar 21, 2004 9:44 am

Pete,

I'm confused.

Is bill your evil twin or is it, uhh, the other way around? :wink:

M

peteamer · **Posted:** Sun Mar 21, 2004 10:32 am

Actually mas,He's the Dad

I'm the good looking one :roll:

Pete

mas92264 · **Posted:** Sun Mar 21, 2004 10:50 am

Quote:

I'm the good looking one

NOT so sure about that one.

Welcome back Dad, however!

M

NullObject · **Posted:** Sun Mar 21, 2004 9:50 pm

peteamer wrote:

Actually mas,He's the Dad

I'm the good looking one :roll:

Pete

I thought you were the erudite one.

Welcome bill_amer.

peteamer · **Posted:** Mon Mar 22, 2004 12:25 pm

No points yet... but I would like to welcome John_Hooker with his Athlon 2600+ to the fold.

Just started tonight under his own name.

Apparently said something along the lines of "Put those 'Bog Trotters' in their place if (crossed out) when we can" :wink:

Fold on O Mighty Brothers

Pete

haysdb · **Posted:** Mon Mar 22, 2004 11:07 pm

A hearty WELCOME to our new members!

Shad0
rick
Pulga
Zinj
Spooooon
BubbaSlash
Geckofiend
joecuba
genetomcat
Equiquay
samwc912
edcrane
makarov
1911user
Caratcus
Bubban
bluddah
Pete
bcassell
hatr
fatboy

EOC lists 149 active members. Outstanding!

Shad0 · **Posted:** Tue Mar 23, 2004 1:16 am

I've been reading quite a few articles on this site for weeks now, so when I found about your [email protected] team I decided to help.
At the moment I'm [email protected] actually, but in a few weeks I'll make myself a good comp thanks to all the things I read here, and it'll fold too

Wrah · **Joined:** Thu Apr 10, 2003 1:56 am **Posts:** 316

bcassell · **Posted:** Tue Mar 23, 2004 1:19 pm

Well, since I took the plunge from lurking to posting, I'll just post briefly here. I have an A64 3000+, p4 2.8, and dual p3 @ 933mhz running folding 24/7. I'm not really familiar with [email protected] or how much of a contribution those machines will make, but hey--everything helps right?

Also, I'd like to give a big thanks to everyone at SPCR for all the great advice I've leeched off of you guys =)

Bryan

peteamer · **Posted:** Tue Mar 23, 2004 1:44 pm

Welcome to the both of you and all others.

Hopefully you'll enjoy your new addiction, just remember to back of a little if you get too much like NullObject :wink:

(Just wait a little and he'll reply.. denying everything. Round here he's known as 'Mr beaten to 100 by Pete' :wink:

)

bcassell, I think you'll be pleased with your output off of those machines.... Well.. at least until your threats list starts to grow :shock:

Then it becomes a whole different game :twisted:

Welcome, enjoy and Happy Hunting those on your 'Hits' list's.

Pete

tomcat · **Posted:** Wed Mar 24, 2004 10:32 am

Thanks for the welcome

i fold under the name genetomcat. My challenge is to have machines that fold very quiet, as i'm sleeping in the same room with all the machines. But that's why i'm reading SPCR

I have a Shuttle Zen folding 24/7 ... it's a P4 1.8A with one lonely fan ... very quiet. The other machine is too loud right now, but better parts are on the way. It's an amd 2500+ overclocked to 3200+.

Waiting to become a folder is a PIII 1.1, overlocked to 1275 ... it's very quiet but i need another case and quiet PSU. Oh, and all those machines are using laptop harddrives, which run quiet and cool.

TomCat

haysdb · **Posted:** Wed Mar 24, 2004 10:45 am

TomCat,

I enjoy the same challenge. Making a PC quiet is relatively simple. Making one quiet that runs at 100% cpu 24/7 is a much greater challence.

Interestingly, the component that makes the most noise in my "blade farm" is a Tripp-Lite surge suppressor!

David

aston · **Posted:** Thu Mar 25, 2004 10:04 am

haysdb wrote:

Interestingly, the component that makes the most noise in my "blade farm" is a Tripp-Lite surge suppressor!

Time to mod it. :lol:

Reminds me of my own non-PC noise problems. Frankly, I don't care much about the noise my HTPC makes, since the fridge is usually louder. Maybe I should start SilentFridgeReview.com.

sthayashi · **Posted:** Thu Mar 25, 2004 1:10 pm

aston wrote:

Reminds me of my own non-PC noise problems. Frankly, I don't care much about the noise my HTPC makes, since the fridge is usually louder. Maybe I should start SilentFridgeReview.com.

If you started a SilentLifestyleReview.com, I would join it in a heartbeat. You could do things like review Silent fridges, Silent Dishwashers, Silent Laundry Machines, Silent Cars....

unregistered · **Joined:** Mon Aug 11, 2003 5:54 pm **Posts:** 542

sthayashi wrote:

Quote:

If you started a SilentLifestyleReview.com, I would join it in a heartbeat. You could do things like review Silent fridges, Silent Dishwashers, Silent Laundry Machines, Silent Cars....

Funny, the quieter things get, the louder everythig else is!

And I'm planning on modding my fridge too.

wgragg · **Joined:** Thu Nov 13, 2003 7:34 am **Posts:** 246

The ultimate would be Silent Wives, followed by Silent Kids! :lol:

peteamer · **Posted:** Fri Mar 26, 2004 11:34 am

wgragg, "Hello... REAL World calling..." :wink:

peteamer · **Posted:** Fri Mar 26, 2004 11:35 am

Mind you... can anyone think of a better idea :shock:

Welcome new members

Who is online